Lian Li ARMORSUIT (PC-P80-B) Black Aluminum Super Full Tower Case

Product Details:

Lian Li's designer has design the chassis from user's point of view. It has to be easy to access, easy to operate, solid as rock, and look stylish! It has to be pass a lot of test before launch to the market. ARMORSUIT PC-P80 has all aluminum alloy chassis, with hair-line brushed aluminum surface with black anodized finishing. Even the power switch, Lian li designer using all aluminum button with concentric circles diamond cut details, to bring out the metallic look. The Internal is important as the external, it must be functional, and also must be friendly to end user, all the sharp edge has been removed, the opening has covered with protection strips. End user can enjoy the safe working environment inside Lian Li's chassis. ARMORSUIT PC-P80 designed for gamers, with optimized cooling performance, and support four graphics cards.

Features:

• AROMORSUIT PC-P80 has 2mm thick aluminum front panel with world first and only three 14cm fans in the front to intake cool air into the system. These fans has blue LED to illuminated the whole front panel.
• ARMORSUIT PC-P80 features huge internal space, user can fitted with most powerful hardware, it can work with 12 x 13 dual processors EATX server board, and a lot of room for other hardware.
• It also features 10 PCI slots, for most advance graphics system, it can housed four dual layers graphics cards, ARMORSUIT PC-P80 designed for today, and tomorrow fastest hardware.
• There are twelve 5.25 space rack in ARMORSUIT PC-P80. there are also two modularized HDD cages, which can hold three 3.5 HDD each. User can adjust the position of the HDD cage to suit their need.

Silent Performance:

• World first and only using 3 x14cm fans in the front to intake cool air into the system.
  14cm fan features low RPM with high air flow to get the best balance between Silent and Cooling.
• Top mount one 14cm blue LED fan, to exhaust the hot air out of the chassis, there is a cover to dim the noise down, and internal also fitted with fan guard to protect end user.
• Lian Li designer looks into detail, ARMORSUIT PC-P80 equipped anti-vibration kit on the chassis, to absorb the noise. Like the EMI spring on the top cover, it absorb the vibration, and the side panel still easy to remove and close.
• Chassis with anti-vibration kit. The anti-vibration spring on the chassis, it push the side panel to against the chassis, reduce the gap between the side panel and the chassis, to reduce the vibration noise level.
• The rubber strip on the front door panel, it stop the door to knock the front panel, to avoid the door scratch the front panel, also close the gap of the door and front panel.
• Lian Li patented anti-vibration HDD cage, with anti-vibration kit and special HDD mounting rack. User can easily install the HDD into the cage. And the rubber rings on the HDD, absorb the vibration to stop the noise.
• Lian Li also look into the detail, where people won't notice, ARMORSUIT PC-P80 equipped high quality aluminum case stand, with anti-vibration rubber pad. To stop noise from vibration, and protect floor surface.

Creative Thermal Solutions:

• ARMORSUIT PC-P80 designed for high end hardware system, there are a lot of fans inside the chassis, to meet the thermal requirement. To make it silent, but still have enough airflow to cool down the system, Lian Li designer using three huge 14cm intake fans in the front, running in low RPM, but still move enough air into the chassis. To get the best balance of silent and cooling
• There are also a 14cm blue LED fan on the top panel to exhaust the hot air out of the chassis, Lian Li designer place a cover to control the air direction, to dim the noise level down.
• Front mount linear fan speed controller for adjust fan speed from 800-1200RPM for the three 14cm fans in the front and one 14cm fan on the top. User can choose the fan speed to get the best cooling or silent performance.
• The air filter is design to be easy to clean, and washable. And it is easy to remove, just pull it out of the front panel door, no tool required
• Rear mount silent 12cm fan to draw the hot system air out. A fan guard fitted to protect user’s hand
• Design for enthusiasts, PC-P80 equips four water pipe inlets, allow to run dual liquid cooling systems.

User Frinedly:

• The Top cover can be open up and remove for easy hardware service and installation
• ARMORSUIT PC-P80 features removable motherboard tray, user can install the motherboard on a table top, easy for future upgrade and service.
• Power / reset button and multi-media I/O ports location on the top-front for easy access. The I/O ports has four USB ports, one ports, HD+ AC 97 Audio and e-SATA ports.
• No matter of where you want to place your chassis. ARMORSUIT PC-P80's front panel can switch the open direction, allow chassis to fit in different working environment.
• The door can be easy to be release, simply just push the release key for the door axis. ( there is a safety screw to secure the axis for transportation).
• Lian Li designer come out an unique door stop design, by using steel ball as door stop, to stop the door in the right position. And sounds like closing the door on a high end automotive.
• ARMORSUIT PC-P80 equipped server grade add-on card holder, to secure the long heavy graphics card in position, to prevent it from bending. There are two different size of support aims for different size cards. It is also a good ideal for LAN party user, to hold the card in position before travel.
• The chassis and front panel all fitted with locks to protect hardware.
• Multi-media ports’ connectors follow international specification standard, with one connector for easy installation
• Audio supports HD Audio and AC97 Audio design for batter compatibility

Optional Side Window Panel:

Specifications:

A power supply is not included. To purchase a power supply please select from the list below. You can also make this case uniquely yours by using our custom case modification services. Just scroll to the bottom and choose from a variety of options.