Home | About Us | Shipping & Returns | Contact Us Follow PerformancePCs on Twitter Bookmark and Share

[ Total Items: 0  0lbs  $0.00 ] 
go to my account go to my shopping cart go to the checkout
  Categories  
     
  New Stuff  
     
  Brands  
     
  Who's Online  
There currently are 192 guests and 
19 members online.
     
Follow PerformancePCs on Twitter







Roccat Arvo

Accept Credit Cards Online
Home :: Nylon/Polypropylene Fittings :: Nylon Fitting 1/4 BPST (G 1/4") Threaded to Barbed Elbow - 3/8 OD - Black
Nylon/Polypropylene Fittings Nylon/Polypropylene Fittings Add to cart for Shipping Estimate
Product 3/39
Previous Return to the Product List Next

Nylon Fitting 1/4 BPST (G 1/4") Threaded to Barbed Elbow - 3/8 OD - Black
$1.29
Model: F-G14-38-ELBOW-BK
Bookmark and Share
 

Product Details:

Our Single Barb Fittings Features and Clamp Dynamics
The threads are molded in precision-ground cavities resulting in perfectly matched threads at the parting line.

This produces the cleanest, most accurate molded thread possible.

Why our fittings are better.
Our single-barbed fittings are designed so the mold parting line stops at the
base of the barb. The ridge and the barb's conical surface are free of the molded-in leak path
present in multiple barb fittings. The conical surface on an Eldon James fitting is glass-like
and smooth allowing excellent sealing.

The straight barb shaft provides space for the hose to relax behind the barb causing the clamp
to work like a drawstring. This forces the hose diameter to become smaller than the flare of the
fitting's barb. If the tubing swells from internal pressure (near burst), the clamp will be pulled
up tight to the back of the barb and a tight seal will be maintained.


 
 
Single Barb Fitting
( Eldon James Fitting)
 
Other
Barb Fitting
Clamp placement on a single barb fitting.
Clamp positioning in the recess behind the barb allows for tubing compression anterior to the barb and results in a secure seal with without excessive clamp pressure 		 Clamp placement on a Multiple barb fitting.
Clamp can only be placed over barb. In general, much more clamp pressure is required to secure a seal than that necessary with a single barb fitting
 
 
Why multiple barb fittings fail
Mismatches often occur with poor quality or worn tooling, causing misaligned threads and barbs
that result in leakage. With multiple barb fitting designs, it is virtually impossible to avoid creating
parting lines on the barb surface. These parting lines create leak paths which become more
pronounced as the mold tooling wears.
 
 
Multiple Barb Fitting - Clamp Dynamics

1. Clamping on a barb's outer radius, in an attempt to force the
tube down behind the barbs can cause damage. The sharp edges of the barbs become rounded resulting in less bite into the tubing.

2. Clamping pressure causes the tube to flare out behind the clamp and barbs located behind the clamp will have little or no effect.
 

Multiple barbs are typically in close succession. This prevents the tubing from relaxing
to its original size, which is essential to the barb's performance. If the tubing does not
relax behind the barb, the barb is rendered useless, as shown above. (Note the bridging effect.)
   
 

$1.29


  Add to Cart:

Add to cart for Shipping Estimate
 
This product was added to our catalog on Friday 16 February, 2007.
Customers who bought this product also purchased...
*** NEW *** Koolance Pump Nozzle & Reservoir Base for PMP-450/S - Acetal
*** NEW *** Koolance Pump Nozzle & Reservoir Base for PMP-450/S - Acetal 		Black Ice® GT Stealth 120 XFlow Highest Performance Radiator
Black Ice® GT Stealth 120 XFlow Highest Performance Radiator 		*** HOT *** SilverStone SST-CLEARCMOS PCI Bracket with CMOS Reset Button
*** HOT *** SilverStone SST-CLEARCMOS PCI Bracket with CMOS Reset Button
Black Ice® GT Stealth 240 XFlow Highest Performance Radiator
Black Ice® GT Stealth 240 XFlow Highest Performance Radiator 		Feser Tube Active UV Hose - 1/2" ID (3/4"OD) Anti-Kink Tubing - UV Carribean Blue - Limited Edition
Feser Tube Active UV Hose - 1/2" ID (3/4"OD) Anti-Kink Tubing - UV Carribean Blue - Limited Edition 		*** NEW *** Koolance Xeon LGA-1366 Bolts for CPU-330/340/350
*** NEW *** Koolance Xeon LGA-1366 Bolts for CPU-330/340/350

  Login  
     
  Search  
     
  Daily Deal  
     


  Policies  
About Us
Shipping & Returns
Privacy Notice
Conditions of Use
Contact Us
Gift Certificate FAQ
Discount Coupon Check
Newsletter Unsubscribe
     
  Notify Me  
Notify me of updates to this product.
Notify me of updates to Nylon Fitting 1/4 BPST (G 1/4") Threaded to Barbed Elbow - 3/8 OD - Black
     
  Tell a Friend  
 
Tell someone you know about this product.
     
  Newsletter  
Subscribe to our newsletter for periodic updates and valuable coupons.

E-Mail Address:
HTML   TEXT-Only
     
ROCCAT KOVA
  Home |  Log In  | Shopping Cart | Checkout  99,967,129 requests since 09/02/2003    
Your IP Address is: 38.107.191.102
Official PayPal Seal Best Viewed with Mozilla FireFox
Zen Cart the Art of e-commerce software for your online business
   Get MicroSoft IE today!
Copyright © 2003 Zen Cart. Powered by Zen Cart
Custom Software and Design by WebMakers.com - Hosting by Sashbox.net
Parse Time: 0.213 - Number of Queries: 256 - Query Time: 0.0797086241913 - Session Time: 3600
SSL