Thermalright AXP-140 Six (6) Heatpipe Copper CPU Heatsink

Product Details:

New brilliant heatpipe cooler from Thermalright, the AXP-140! When putting forth the design for AXP-140, HTPC audience was our primary goal. Micro-ATX motherboards are definitely included in our plan. You would not have spacing problem with AXP-140. Basically, for mid tower cases there are two types of formats to determine compatibility with AXP-120. You will first need to confirm that your case has a width of 110mm or above. Next, locate your PSU (Power Supply unit). If your PSU is located right above the motherboard without overlapping, you’re ok to install AXP-120. If your PSU is located at the bottom then you would not be able to install AXP-140. Please refer to illustration. Current highest heatpipe cooling system is no higher than 37mm. There is a distance of 40mm from the bottom of the base to the first fin from the bottom, therefore it is safe to say that at long as you have at least 40mm of clearance, motherboards that incorporate the heatpipe cooling system will have room to work with AXP-140

Features:

• Low profile CPU cooler with down draft style of air cooling makes it perfect for HTPC; heasink total height is 70.2 mm.
• Down draft air flow helps to cool CPU surroundings such as MOSFET and North Bridge chipset producing a general reduction in temperature inside your computer case.
• Large surface area for cooling (140mm x 140mm) with option to install a 120mm fan or a 140mm silent fan, balancing noise and performance to suit your preference.
• Six nickel-plated heatpipes to reduce oxidation effect, maintaining top performance for long term usage.
• Features an all copper base and soldering technology that has each heatsink fins soldered to the heatpipes for a definite contact in producing high efficiency rate of heat transfer.

Specifications:

• Dimension: L145 x W147 x H70.2 mm
• Weight: 900g (Heatsink only)
• Heat pipes: Six heat pipes with Nickel plated
• Heat sink base : copper
• Recommended fan: 120*120*25mm or 140*140*25mm fan
  
  ■Detail Drawing

Compatibility:

CPU Compatibility : Support Intel Socket 775 motherboard.

Case Compatibility : For any case that has at least 110mm of height clearance, you can choose to install AXP-140. 80% of HTPC cases in current market are within the compatible range. Only under special circumstances where the case manufacturers incorporate ventilation system would hinders AXP-140 from being installed properly

Components:

AXP-140	775 Bracket	775 Backplate	MINI Wrench
Screws cap*4	Fan wire clip*2	Anti-ration strip *2	Thermal Paste