Product Details:The new XT Aquastream pump is to be completely
revised successor to the tried and tested Aquastream Rev. 3.5, the absolute
leading edge of developments in the field of virtually noiseless pump for water
cooling systems environment. In this pump includes not only traditional pump
functions, but is a highly integrated microprocessor-controlled measuring and
control system for your cooling system is, as it is unique. Compared to previous
models of feature size has been increased massively. All versions of the XT
Aquastream now have a USB interface, which is possible to monitor and control
even without connecting to a aquaero. The control function can be controlled
aquasuite with our known and downloadable from our website free Windows
software. Depending on the software version of an activated pump also the first
time a fan output, temperature sensors, and a connection for a flow sensor are
available. In the maximum configuration means that all important monitoring and
control functions for a water cooling system is already integrated into the
pump.
New features include a rotation detection, and automatic determination of the
maximum frequency, so that ensures reliable operation even at maximum pumping
capacity. In contrast to previous models is the XT Aquastream the control board
integrated into the pump housing without providing the housing had to be
enlarged.
Maximum performance with smart electronics:
The mechanics of the pump continues to be based on the proven technology Eheim
whose smoothness is unprecedented. Compared to the predecessor models, the
maximum discharge was increased to 4.2 m sensational. This is one of the most
powerful Aquastream XT pumps on the market and is virtually silent. This was
achieved by a highly intelligent control of complex algorithms and sensor
technologies. Permanent and about 1000 times per second rotor position, current
consumption, power and voltage can be determined. This optimal control is
calculated. Depending on the system, the pump can work internally min up to 6000
rpm.
The pump frequency is automatically determined by the pump can be set manually
or by software. Here, the pump automatically detects the optimum operating
point.
The data will be passed on via USB or aquabus and can be evaluated and shown in
the aquasuite software. The software is a aquasuite for all Aqua Computer
products only once to install application with integrated database, networking
(including maintenance) and many tax opportunities.
In parallel, a tachometer signal can be passed on to the motherboard, which can
cause errors at the pump a shutdown of the computer.
Of course, the Aquastream XT still has the Aqua Computer introduced several
years ago as a pioneer ventilation program that can be started by a jumper or
software. This can now be configured even at their convenience.
The sensor system of the Aquastream XT: water included
No other competing product can currently offer the function and services of
aquastream XT. Our development department has already included the measurement
of water into the pump. This measurement can be read even by aquabus of aquaero
and used for the control. Continue to be determined internally several
temperatures of the power amplifiers. It has the pump intelligent protective
functions: If the temperature rises above the programmed protection values from
work, the electronics are in a security mode set to avoid the damage. It will be
taken depending on the temperature, different strategies.
External connectivity expand the range of services: As direct can be connected
to the pump an additional external temperature sensor and a flow sensor. Both
are evaluated at extremely high accuracy and can be embedded into the alarm
scheme. This incredible number of alarm thresholds and parameters are freely
configurable.
Integrated fan control. Intelligent control for super quiet operation of your
system.
You want a high-performance cooling system with one of the best control
mechanisms of the world? Then the Aquastream XT is the perfect solution. The
highly complex integrated PID controller works for you silently in the
microprocessor and has this cool only one goal: your computer to your desired
temperature and it somehow just as quiet as possible to operate your fan. This
is all calculated using a mathematical model, the regulator charged over 1000
times per second your new to the necessary fan speed fan, the fan output
measures and new sets. Of course, without humming a high-precision analog PWM
output voltage is provided. It also needed to be considered start-up speed of
your fan and automatically executed by the controller.
They want more influence? Then you are served correctly. All controller settings
can be complex, influenced by you, or be selected quickly using pre-configured
presets. can be regulated according to the internally measured water
temperature, the external temperature or manually set.
Of course, in the event of a failure of the fan and an alarm signal.
Moreover, it was placed on the highest reliability value: If an excessive load
connected to the fan output, recognized by the electronics, this fully
automatic. It will do so first by a voltage setting of 100% to reach a minimal
power dissipation in the system. This is not sufficient to protect the
electronics, then a further alarm and shut off the output.
By the way: It can easily be three airstream fan connected to the output. Thus,
even 360s radiators are easily controlled.
All features buy now - or if you really need them?
Development costs money, features will be maintained and not everyone needs
everything. Therefore there are variations in the XT Aquastream Standard,
Advanced and Ultra. So you do not pay more than you need, but have one big
advantage: You can later upgrade your pump. You must buy only one key and enter
in the aquasuite software. In order to unlock the additional functions of the
Advanced and Ultra variant.
The exact features, please see the following list:
All Versions:
- Based on the proven technology of Eheim 1046 pump, specially adapted to the
requirements of Aqua Computer
- Full ceramic bearing of the pump rotor
- Pure-12-V pump - it will not generate higher voltages
- Low power consumption of typically about 5 W
- Micro processor control with optimized controlling of the pump and USB
interface for communication with the PC
- Continuous measurement of voltage, current consumption and the recorded line
- Speed signal output with parametric functions, and alarm function
- Ventilation Program
- Aquabus interface to connect to other computer devices Aqua Measurements: 115mm L x 55mm W (not including base); 75mm W (including base) x 72mm H
Includes:
1x Aquastream XT USB 12V Pump
1x ATX connector bridge to start the PC power supply
1x USB cable
1x speed signal cable
1x Jumper
1x English & German installation manual
Please note:
The pressure and suction ports are identical to the Eheim 1046th The adapter set
and suitable connections must be purchased separately.
WARNING: If you want to block the pump in a aquabay, so you need a
current and a current aquabay Connecting kit. Old versions before September 2007
are not compatible.
Test the advance aquasuite software in demo mode:
In our support area you can download a free version of the current aquasuite
software and start it in demo mode. In this mode, you can see, even without an
existing pump aquastream their menus and display
*** For the options below DO NOT order fittings unless you order the G1/4
Inlet and Outlet adapters or they will not fit the pump. ***
|
