EK-FB KIT RE4 CSQ is a complete water cooling solution for ASUS
Rampage IV Extreme motherboard consisting of two separate water blocks.
The water blocks directly cools Intel X79 Express southbridge
(PCH) chip and power regulation (VRM / MOSFETs) module. Please note
this water block cools exactly as much heat generating components as
ASUS factory cooling solution. It is medium-high to high flow water
block that can be easily used with systems using weaker water pumps.
of the waterblock is made of electrolytic copper while the top is made
of quality POM acetal material. The sealing is
performed by quality rubber gaskets.Water block is mounted
with enclosed M2.5x4, M3x4 and M3x8 DIN7985 screws and PVC washers. The
2.1- and 2.5mm nickel plated brass screw-in standoffs are already
preinstalled and allow for easy installation. Enclosed thermal pad is used on voltage regulator module to improve cooling performance of the waterblock. On the southbridge please use any electrically non-conductive thermal grease, e.g. Gelid GC-Extreme.
maximum diameter of barbs/fittings on SB part of the water block kit
must be 22.2 mm in order to allow the installation of the graphics card
mounted with EK-FC series backplate in the first PCIe x16 slot!Enclosed: - 2 x water blocks (MOSFET & SB)- mounting mechanism - thermal pads
are optional not enclosed! Four fittings are needed to make this
waterblock to operate properly. All EK-PSC fittings are compatible with
this water block!
Made in Slovenia - Europe!