Vandal Resistant Illuminated Switch - 22mm White Ring

Product Details:

This momentary on/off switch is the ideal new switch for modding enthusiasts. When turned on, the ring around the push button illuminates in the specified color. Easy to install and will fit on a regular 5.25 drive cover or wherever you chose to mount it.

NOW IN STOCK WE ALSO HAVE LATCHING ON/OFF Vandal switches. Please choose from the options below the right style. An ON/OFF latching switch would be for turning on fans and lights, etc.

Manufactured from Delrin this extensive range of vandal resistant security switches are designed for use in potentially hostile environments, such as access control applications or, in the case of modders, powering up your case to "on" or for use as a reset button.

This is a bare switch only and will need wiring to be able to use. Instructions are included. For those that want Pre-wired and sleeved switches please click ==> HERE <==

Features:

• Front Panel Mounting
• Ring Illuminated
• 22mm diameter
• S.P. Push to Make
• 50mA, 24V dc contact rating Switch
• Blue Illumination
• Bright Daylight LEDs
• Separate LED Terminals

Specifications:

• Terminations: (2.8mm tabs)
• Switching: S.P. Push to make, tactile S.P.or Push/Latch
   
• Max. Rating: 50mA, 24V d.c. switch
• Contact Resistance: <100mΩ.
• Insulation Resistance: >103 MΩ.
• Dielectric Strength: Contact to Panel >2.0kV
• Contact to Contact 1500V Contact
• Operating Temp. Range: .30C to +70C
• Sealing (Front of panel only): Protection Classification: IP66 EN60529
• Materials:
  Switch assembly: V-0 rated Polyamide (Nylon)
  Tags: Copper Alloy
  Terminals: Copper Alloy
  Switch Body & Button: Delrin
  Lens and Lens Body: Polycarbonate
  O rings: Nitrile and Silicone
  Contact Plate: Gold Plated
• LEDs (ratings @ 20mA) Blue: 1500 mcd 3.4 V

NOTE: LED is rated for 3.4 Volts and the motherboard LED headers are 3.3V. This is acceptable

All Vandal Switches are tested in house before shipment. Absolutely NO returns of switches that have a burnt out LED!