Arctic Cooling Accelero TWIN TURBO All nVIDIA GeForce 9600GT to ATI Radeon HD4870

Product Details:

A new dual-fan VGA cooler Accelero TWIN TURBO, adding a multi-compatible high performance merchandise into their reputable VGA cooler product line. With 26°C temperature reduction and 0.6 Sone noise level, the Accelero Twin Turbo is an ideal VGA cooler for enthusiasts to boost overclocking potential to a new horizon.

Main features:

• Unmatched cooling performance – up to 120W
• Efficient heat transfer via 4 heatpipes and 30 fins
• Two ultra quiet 80mm fans with low noise impeller
• Patented fan holder eliminates the buzzing sound
• RAM and voltage regulator cooling
• SLi and Crossfire compatible
• Pre-applied MX-2
• Lightweight, transport safe
• 6 year warranty

Unmatched Cooling Performance
Featuring 4 heat pipes, 30 fins and 2 PWM fans, the Accelero TWIN TURBO optimizes airflow to 40 CFM, and achieves up to 120 Watt cooling capacity. Together with memory and voltage regulator cooling, this new VGA cooler gives enthusiasts a very promising result – 26°C lower than the nVIDIA GeForce 9600GT stock cooler. With such phenomenal cooling performance, the Accelero TWIN TURBO also maximizes the overclocking potential and extends the service life of your graphics card.

The Art of Silence
Low noise impeller and patented fan holder are installed in the two 80mm PWM fans. This unique design reduces the humming sounds significantly and brings the noise level down to 0.6 sone, compared with 1.3 sone of noise generated from the stock cooler.

Flexible Mounting System
The universal design for the Accelero Twin Turbo supports the hottest graphics cards in the market, from nVIDIA GeForce 9600GT to ATI Radeon HD4870, 4850 and many more! It also comes with 2 fan plugs for direct power connection to the VGA card and thus the fans can be controlled by the VGA software.

Compatibility:

Solving problems of insufficient cooling performance of Accelero Twin Turbo

On some Accelero Twin Turbo we unfortunately found, that the mounting-bracket was accidentally bended from factory o­n. Thus the cooler can not make a proper contact to the GPU.

To solve this issue we advice a simple and effective solution by bending it manually. The bracket can easily be bent either by using claws or by hand.



Please bend the bracket slightly up, according to the drawing. The bracket then should be slightly above the base of the cooler itself.

Please accept our apologies on this circumstance. We have already taken action to improve it immediately.

Installing the voltage regulator cooling module and ram-coolers o­n ATI HD4850


The heat sinks have to be installed shifted to each other, so that the fins of the light grey heat sinks fit into the gaps of the dark grey o­nes.

Unfortunately there is a conflict between the lowest memory-cooler and the heatpipe of Accelero Twin Turbo. The best solution is to cover as much of the memory-chip's surface as possible.

Installing the voltage regulator cooling module and ram-coolers o­n ATI HD4870

When using ATI HD 4870, three lower voltage regulators are covered by two VR cooling modules. Then, another VR cooling module is mounted o­n the lasting two voltage regulators which are located at the top of the card.

Unfortunately there is a conflict between the lowest memory-cooler and the heatpipe of Accelero Twin Turbo. The best solution is to cover as much of the memory-chip's surface as possible.

Specifications: