Product Details:Alphacool Heatmaster fan/pump control and
temperature measuring at it's finest!!!
…measure, control, monitor, warn and protect. PC independent*. If any of these
points sound interesting to you or you are looking for an automatic control low
noise solution, then Alphacool Heatmaster® is the ideal product for you.
Alphacool Heatmaster is the complete solution for all measuring and controlling
scenarios in the area of PC's. It can protect your computer from damages through
overheating due to breakdowns of the fan, the pump or the flow-through (Ex.
snapped off tube). Three timely staggered alarm levels, consisting of visual and
acoustic alarms with the respective level depended alarm tones:
Level 1 : Warns and switches on all fans and pumps with 100 percent performance
Level 2 : The second tone sequence notifies the main board BIOS about the
failure
of the CPU's fan so that preventive measures can be triggered
Level 3 : The third tone sequel signals the upcoming complete shutdown of the PC
System
These functions are easily configurable. You can for example, switch other
machines through the Heatmaster relays in case of an emergency.
*Upon complete configuration of the Heatmaster, it will control and monitor your
fans, pumps and temperature, completely independent from your PC. You don't need
any software or even the USB cable. Thus there will be no resource wastage of
processing time and RAM, no active driver, no loss of frames in your games. An
external use for your own private project is herewith possible.
If you want to utilize the Heatmaster especially for measuring purposes, there
are three distinct features: Through the Heatmaster software Delta-t, you can
display figures of the temperature sensors directly and save in a Log-Folder.
You can enter values from the manufactures data for temperature sensors (Nominal
resistance (Rn) at 25° and the Beta- value) to improve the measurement accuracy,
or even enter self ascertained values. But even without these measures the
Heatmaster consists of a Beta-correction value, which has been determined
through several standard sensors thus increasing basic accuracy.
With the Heatmaster software, we are dealing with user friendly and still
extensive controlling software, which enables all the necessary steps to be
taken on a user interface to set up one control loop with Drag & Drop. Simply
drag with the mouse the desired device (sensor, fan, pump, relays or alarm
buzzer) into the five possible control loops, configure the devices by placing
ticks and the entering of the desired temperature, RPM and PWM values. You do
not need to do anything more. You can let the resolved settings to be displayed
on the screen at any time. The software is already executable with the up to
date RC of Windows 7.
Overview of the Features:
+ PC software independent. Upon configuration of the Heatmaster all settings
will be saved.
+ After system installation no connection through the USB cable is necessary,
thus no need of a maintenance effort for the operating system is necessary
through a USB device.
+ No wastage of PC resources like memory and CPU processing time or for example
frame loss in PC games due to the maintenance of the controlling, measuring and
alarm functions.
+ Three levels of alarm (PC independent warning tone, System alarm on main board
BIOS, PC shut down).
+ Windows Drag & Drop surface.
+ Graphical display of Delta-t values from two temperature sensors.
+ Log function of temperature and fan/pump values
+ Up to 24 watt pro fan/pump channel.
+ 4 fans and pumps directly controllable/monitorable
+ Hysteresis function.
+ Support/shifting of Celsius and Fahrenheit, liter and gallons
+ Analysis of the RPM-values and controlling of PWM-values
+ Separate connection for the flow-through measure.
+ 5 NTC temperature sensors connectable, extra onboard sensor on the Heatmaster.
+ Predefined Beta-value to increase measurement accuracy
+ Precise sensor calibration is possible through entering of the nominal
resistance (Rn) at 25° and + of Beta-value
+ On board relays attachment for further controlling tasks available (Alert).
+ Up to 5 free configurable controllable loops per Drag & Drop with alarm
observation.
+ PC independent alarm tone generator
+ Extended exertion of influence through changing of the PID parameter
+ Updates of software and firmware.
+ Quick montage anywhere in the PC with Velcro tape fixing
Further details can be taken from the PDF handbook
System Requirements:
Minimum configuration
PC Intel Pentium ® III 1 GHz*/AMD Athlon ® 1 GHz*, 512 MB Ram*, 20 MB free hard
disc space, USB 2.0
Operating System
Microsoft Windows XP ® from Service pack 2, Microsoft Windows Vista ® 32/64 Bit
from Service pack 1
*After configuration and operation without Windows software the requirements to
CPU and memory need are omitted
Made in Germany
Declaration of conformity:
CE declaration of conformity
This product was developed and tested according to the harmonizing European
norms EN 55014-1 and EN 61000-6-3. This product fulfills requirements of the EG
guidelines 2004/108/EG for electromagnetic compatibility; therefore carries the
CE trademark
RoHS
All parts of Heatmaster Hardware are RoHS conformal
WEEE / ElektroG
Delivery Content:
3x 17502 Thermo sensor 2pin socket
1x 27019 Extension cord 12V/3pin/plug on 12V/3pin/socket (fan extension cord
60cm)
1x 25010 Main board connection cable tach signal
1x 45302 USB cable 2.0 A on B black 2m
1x 25043 Standby cable 2 PIN socket on 2 PIN socket
1x 17698 Audio signal giver
1x 90600 Alphacool-Software for the Heatmaster (CD)
1x 13700 Velcro tape 107x85 mm both side attachable
Recommended Accessory : Heatmaster options kit, Alphacool pump adapter
60cm |
