The Acrylic/PETG Easy Cut / Easy Bend Toolkit, takes the hard work out of using rigid tubing. These kits are made for tubing with 10mm inner diameter and 12-14 outer diameter. Just follow these simple steps:
Insert the Bending Rubber into the acrylic/PETG tube
Heat the tube at the bend point, using a heat gun or hair dryer (not supplied)
Insert the heated tube into the acrylic/PETG Easy Bending Tool
Bend the tube to the required radius and allow to cool
Remove the Bending Rubber from the tube
Use the Heavy Duty Hose Cutter to trim the tube to the required length
Insert each end of the trimmed tube to the acrylic/PETG Chamfer tool and rotate anticlockwise
Use the Sand Paper to clean up the chamfered edges
** NOTE" Silicon bend chord can shrink by nearly 4% with drops in the temperature from 35C to 15C. On a loose fit in your tube, XSPC's advises customers to soak the chord in warm water before use.
Heavy Duty Hose Cutter - The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw.
PETG Easy Bending Tool - This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube.
Bending Rubber -Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming.
PETG Chamfer Tool - Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise.
PETG Edging Sandpaper - Ideal for sanding the edges of PETG tubing, after using a chamfer tool.
No,it won't work for 12/16mm tube since the outer diameter our PETG bending Rubber is 10mm and our PETG easy bending tool is suitable for 12-14mm outer diameter PETG tubing. The other 3 items(PETG edging sandpaper,Heavy duty hose cutter(0-25mm),PETG chamfer tool) in this kit can work with 12/16mm tube. http://www.xs-pc.com/petg-tubefittings/petg-easy-bending-tool http://www.xs-pc.com/petg-tubefittings/petg-bending-rubber
I tried and it shattered the acrylic tube. I believe it's more meant for PETG like stated in the product discription.
by kitsune1324
8 years and 4 months ago00
Yes it will
by PPCS Staff
8 years and 5 months ago00
Answer this Question
Ask a New Question
Configure XSPC Acrylic/PETG Easy Cut / Easy Bend Toolkit
OR
product
https://www.performance-pcs.com/xspc-acrylic-petg-easy-cut-easy-bend-toolkit-xspc-bend-kit.html16817XSPC Acrylic/PETG Easy Cut / Easy Bend Toolkithttps://www.performance-pcs.com/media/catalog/product/t/m/tmppetg_toolkit__43687.1444090343.1280.1280.jpg16.9521.4900USDInStock/Water Cooling/Water Tubing (Soft & Hard)/Tubing and Pipe Tools<p>The Acrylic/PETG Easy Cut / Easy Bend Toolkit, takes the hard work out of using rigid tubing. .</p> <p>The Acrylic/PETG Easy Cut / Easy Bend Toolkit, takes the hard work out of using rigid tubing. These kits are made for tubing with 10mm inner diameter and 12-14 outer diameter. Just follow these simple steps:</p>
<ol>
<li>Insert the <strong>Bending Rubber</strong> into the acrylic/PETG tube</li>
<li>Heat the tube at the bend point, using a heat gun or hair dryer (not supplied)</li>
<li>Insert the heated tube into the <strong>acrylic/PETG Easy Bending Tool</strong></li>
<li>Bend the tube to the required radius and allow to cool</li>
<li>Remove the <strong>Bending Rubber</strong> from the tube</li>
<li>Use the <strong>Heavy Duty Hose Cutter</strong> to trim the tube to the required length</li>
<li>Insert each end of the trimmed tube to the <strong>acrylic/PETG Chamfer tool</strong> and rotate anticlockwise</li>
<li>Use the <strong>Sand Paper</strong> to clean up the chamfered edges</li>
</ol>
<p><strong>** NOTE" Silicon bend chord can shrink by nearly 4% with drops in the temperature from 35C to 15C. On a loose fit in your tube, XSPC's advises customers to soak the chord in warm water before use.</strong></p>XSPC00https://www.performance-pcs.com/media/catalog/product/t/m/tmppetg_bend_6__58226.1444090342.1280.1280.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmppetg_bend_5__22071.1444090342.1280.1280.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmpb__40886.1444547713.1280.1280.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmppetg_cut__51221.1444091063.1280.1280.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmpreamer_2__24153.1444090343.1280.1280.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmppetg_paper__95446.1444090343.1280.1280.jpg13.1400XSPCTool5060175586346<p><strong>Kit includes:</strong></p>
<ul>
<li><strong>Heavy Duty Hose Cutter</strong> - The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw.</li>
<li><strong>PETG Easy Bending Tool</strong> - This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube.</li>
<li><strong><strong>Bending Rubber </strong></strong>-<strong><strong> </strong></strong>Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming.</li>
<li><strong>PETG Chamfer Tool</strong> - Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise.</li>
<li><strong>PETG Edging Sandpaper</strong> - Ideal for sanding the edges of PETG tubing, after using a chamfer tool.</li>
</ul>
/Water Cooling/Water Tubing (Soft & Hard)/Tubing and Pipe Tools345154Tubing and Pipe Toolshttps://www.performance-pcs.com/water-cooling/water-tubing-soft-hard/tubing-and-pipe-tools.html14