This new Tweakmonster product is a direct replacement for the near worthless performing heat spreaders most of us have been using on our system RAM. Up until this point, there was really nothing else available that would actually help to cool your system RAM for even higher clock speeds, not to mention there is definitely not one readily available that will allow you to run two sticks side-by-side (as in Dual Channel setups) with NO interference problems. These will. Finished with the blinding chrome plating, they look just as good as the world famous TweakMonster RAMsinks!
Features:
RAMcooler dimensions (in inches) are .425 width x .950 length x .100 height.
All RAMcoolers are manufactured from a high thermally conductive aluminum alloy and then plated with an almost blinding chrome finish.
The mounting surface is also chrome plated and ready to mount with little or no lapping required.
These RAMcoolers have been designed as a direct replacement for heat spreaders, and will cover both DDR and SDR RAM chips found on all system RAM sticks.
They will NOT cause interference with the RAM stick in a parallel slot, which makes them perfect for the Dual Channel setups found on N-force and Canterwood based motherboards.
All Tweakmonster RAMcoolers have a hard, chrome-like finish process added which not only stops oxidation from occurring, but also enhances their beauty and durability.
These are a one-of-a-kind, custom made product that will add both performance AND beauty to your system and allow for even higher stability and overclocking of the front side bus (FSB) for unbelievable speed.
For proper installation, it is recommended to use non-conductive thermal adhesive which can be found here. Also, be sure to consult the installation guide first which can be found here.
*** These ramcoolers are sold 8 in a pack and can be used for all DDR and SDRAM applications. ****
The worldÂ’s first Tweakmonster RAMcooler review has been posted at nvnews.net! Here is a quote:
“As with other cooling products targeted at overclockers there are a host of conditions that can limit your results. But if you're looking for an edge, Tweakmonster's RAMcoolers will certainly increase the overclocking potential of your system's memory.”
This new Tweakmonster product is a direct replacement for the near worthless performing heat spreaders most of us have been using on our system RAM. Up until this point, there was really nothing else available that would actually help to cool your system RAM for even higher clock speeds, not to mention there is definitely not one readily available that will allow you to run two sticks side-by-side (as in Dual Channel setups) with NO interference problems. These will. Finished with the blinding chrome plating, they look just as good as the world famous TweakMonster RAMsinks!
Features:
RAMcooler dimensions (in inches) are .425 width x .950 length x .100 height.
All RAMcoolers are manufactured from a high thermally conductive aluminum alloy and then plated with an almost blinding chrome finish.
The mounting surface is also chrome plated and ready to mount with little or no lapping required.
These RAMcoolers have been designed as a direct replacement for heat spreaders, and will cover both DDR and SDR RAM chips found on all system RAM sticks.
They will NOT cause interference with the RAM stick in a parallel slot, which makes them perfect for the Dual Channel setups found on N-force and Canterwood based motherboards.
All Tweakmonster RAMcoolers have a hard, chrome-like finish process added which not only stops oxidation from occurring, but also enhances their beauty and durability.
These are a one-of-a-kind, custom made product that will add both performance AND beauty to your system and allow for even higher stability and overclocking of the front side bus (FSB) for unbelievable speed.
For proper installation, it is recommended to use non-conductive thermal adhesive which can be found here. Also, be sure to consult the installation guide first which can be found here.
*** These ramcoolers are sold 8 in a pack and can be used for all DDR and SDRAM applications. ****
The worldÂ’s first Tweakmonster RAMcooler review has been posted at nvnews.net! Here is a quote:
“As with other cooling products targeted at overclockers there are a host of conditions that can limit your results. But if you're looking for an edge, Tweakmonster's RAMcoolers will certainly increase the overclocking potential of your system's memory.”
https://www.performance-pcs.com/tweakmonster-ramcoolers-rev-1-ramcoolers-d.html2294Tweakmonster RamCoolers Rev. 1https://www.performance-pcs.com/media/catalog/product/t/m/tmpramstick_t_01.jpg59.9500USDInStock/Air Cooling/Memory Cooling & Enhancement<h3>Product Details:</h3>This new Tweakmonster product is a direct replacement for the near worthless performing heat spreaders most of us have been using on our system RAM. Up until this point, there was really nothing else available that would actually help to cool your system RAM for even higher clock speeds, not to mention there is definitely not one readily available that will allow you to run two sticks side-by-side (as in Dual Channel setups) with NO interference problems. These will. Finished with the blinding chrome plating, they look just as good as the world famous TweakMonster RAMsinks! <p align="center"><a href="http://www.tweakmonster.com/products/ramsinkpage.htm" target="blank"><img title="Tweakmonster" alt="Tweakmonster" src="/pub/media/descriptions/635-tweakmonster.gif" border="0" /></a></p><b>Features:</b><br /><br /><li>RAMcooler dimensions (in inches) are .425 width x .950 length x .100 height.<br /><br /></li><li>All RAMcoolers are manufactured from a high thermally conductive aluminum alloy and then plated with an almost blinding chrome finish.<br /><br /></li><li>The mounting surface is also chrome plated and ready to mount with little or no lapping required.<br /><br /></li><li>These RAMcoolers have been designed as a direct replacement for heat spreaders, and will cover both DDR and SDR RAM chips found on all system RAM sticks.<br /><br /></li><li>They will NOT cause interference with the RAM stick in a parallel slot, which makes them perfect for the Dual Channel setups found on N-force and Canterwood based motherboards.<br /><br /></li><li>All Tweakmonster RAMcoolers have a hard, chrome-like finish process added which not only stops oxidation from occurring, but also enhances their beauty and durability.<br /><br /></li><li>These are a one-of-a-kind, custom made product that will add both performance AND beauty to your system and allow for even higher stability and overclocking of the front side bus (FSB) for unbelievable speed. <br /><br />For proper installation, it is recommended to use non-conductive thermal adhesive which can be found <a href="http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=58&products_id=227"><b>here.</b></a> Also, be sure to consult the installation guide first which can be found <a href="http://www.tweakmonster.com/ramcoolers/index.htm"><b>here. </b></a><br /><br /><b>*** These ramcoolers are sold 8 in a pack and can be used for all DDR and SDRAM applications. ****</b><br /><br />The world’s first Tweakmonster RAMcooler review has been posted at nvnews.net! Here is a quote:<br /><br /><i>“As with other cooling products targeted at overclockers there are a host of conditions that can limit your results. But if you're looking for an edge, Tweakmonster's RAMcoolers will certainly increase the overclocking potential of your system's memory.”</i><br /><br />Read the full review <a href="http://www.nvnews.net/reviews/tweakmonster_ramcoolers"><b>here. </b></a></li> <h3>Product Details:</h3>This new Tweakmonster product is a direct replacement for the near worthless performing heat spreaders most of us have been using on our system RAM. Up until this point, there was really nothing else available that would actually help to cool your system RAM for even higher clock speeds, not to mention there is definitely not one readily available that will allow you to run two sticks side-by-side (as in Dual Channel setups) with NO interference problems. These will. Finished with the blinding chrome plating, they look just as good as the world famous TweakMonster RAMsinks! <p align="center"><a href="http://www.tweakmonster.com/products/ramsinkpage.htm" target="blank"><img title="Tweakmonster" alt="Tweakmonster" src="/media/descriptions/635-tweakmonster.gif" border="0" /></a></p><b>Features:</b><br /><br /><li>RAMcooler dimensions (in inches) are .425 width x .950 length x .100 height.<br /><br /></li><li>All RAMcoolers are manufactured from a high thermally conductive aluminum alloy and then plated with an almost blinding chrome finish.<br /><br /></li><li>The mounting surface is also chrome plated and ready to mount with little or no lapping required.<br /><br /></li><li>These RAMcoolers have been designed as a direct replacement for heat spreaders, and will cover both DDR and SDR RAM chips found on all system RAM sticks.<br /><br /></li><li>They will NOT cause interference with the RAM stick in a parallel slot, which makes them perfect for the Dual Channel setups found on N-force and Canterwood based motherboards.<br /><br /></li><li>All Tweakmonster RAMcoolers have a hard, chrome-like finish process added which not only stops oxidation from occurring, but also enhances their beauty and durability.<br /><br /></li><li>These are a one-of-a-kind, custom made product that will add both performance AND beauty to your system and allow for even higher stability and overclocking of the front side bus (FSB) for unbelievable speed. <br /><br />For proper installation, it is recommended to use non-conductive thermal adhesive which can be found <a href="http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=58&products_id=227"><b>here.</b></a> Also, be sure to consult the installation guide first which can be found <a href="http://www.tweakmonster.com/ramcoolers/index.htm"><b>here. </b></a><br /><br /><b>*** These ramcoolers are sold 8 in a pack and can be used for all DDR and SDRAM applications. ****</b><br /><br />The world’s first Tweakmonster RAMcooler review has been posted at nvnews.net! Here is a quote:<br /><br /><i>“As with other cooling products targeted at overclockers there are a host of conditions that can limit your results. But if you're looking for an edge, Tweakmonster's RAMcoolers will certainly increase the overclocking potential of your system's memory.”</i><br /><br />Read the full review <a href="http://www.nvnews.net/reviews/tweakmonster_ramcoolers"><b>here. </b></a></li>00https://www.performance-pcs.com/media/catalog/product/t/m/tmpramstick_t_03.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmpramstick_t_02.jpg7.6500
Good Stock 9 left
Good Stock 9 left
Download PDF 
