The award winning passive VGA cooler extends its compatibility to the latest graphic cards The Accelero S1 Rev. 2 dramatically extends the compatibility to many of the latest graphic cards. It supports high-end to main stream graphic cards including the latest hot selling Radeon HD 3870, 3850 , GeForce 8800GTS (G92) and 8800GT.
The Accelero S1 Rev. 2 now comes with a new flexible mounting mechanism, multiple screw hole sets and modifications to the heatpipes enabling it to fit a wider range of leading graphic cards. As a result more gamers can benefit from adopting the Accelero S1 Rev. 2 which dramatically improves their gaming experience.
.
To provide passive cooling for high-end graphic cards, Accelero S1 Rev. 2 is a high performance passive cooler featuring 4 heatpipes connected with extra large surface area. It effectively removes a great deal of heat from the graphic cards keeping the components cool. Thanks to the elegant design, Accelero S1 Rev. 2 outperforms active cooling solutions. Accelero S1 Rev. 2 creates a true industry leading zero noise cooling solution for all enthusiast gamers.
Noiseless Cooling
4 Heat Pipes
Special Heat Spreader for Voltage Regulator Cooling
Memory Cooling
High Reliability
Low Weight
6 Years Warranty
The cold air is drawn from outside to cool the fins directly:
The fins design optimize for air ventilation that enhance cooling performance:
Accelero S1 Rev. 2 features 4 thick copper heatpipes which connect directly from the GPU core. The heatpipes with sintered powder wicks provide ultimate heat conductivity. Heat from the GPU is rapidly dissipated through 32 fins that extend beyond the height of the graphic card. Optimized fin design allows better air flow thus removing the heat more effectively. Together with the bundled RAM heat sinks and voltage regulator heat spreader, Accelero S1 Rev. 2 provides an all-round passive solution that achieves the best cooling performance.
Noise Level:
Temperature oÂn ATI X1950Pro:
Never compromised oÂn noise Install and forget about it – No moving parts means it is maintenance free. An extra pair of mounting clips provides extensive protection to the graphic card that prevents damage from improper handling. With the help of the new mounting design, Accelero S1 Rev. 2 is widely compatible with high end ATI and nVIDIA graphic cards.
Accelero S1 Rev. 2 can still be paired with the Turbo Module – the twin fans add-on, which further increases the potential power of Accelero S1 Rev. 2 with enhanced cooling performance under extremely quiet operation. Turbo Module helps boost up the GPU and memory overclockability, squeezing more graphic performance than ever before.
Specifications:
Heat Sink:
138(L) x 215(W) x 33(H) mm
Heat pipe:
6 mm x 4
Weight:
268 g
Accessories:
2 Voltage Regulator Heat Spreaders
Â
8 Memory Heat Sinks
Warranty:
6 Years
Â
Â
Â
Compatibility:
The Accelero S1 Rev. 2 is fully compatible with GeForce 8800GTS(G92)* / 8800GT and Radeon HD 3870 / 3850 graphic cards. Using the Accelero S1 Rev. 2, both Radeon HD 3870 / 3850 and GeForce 8800GTS(G92)* / 8800GT graphic cards have been tested and confirmed that they operate well within the specifications under full load operation. The Accelero S1 Rev. 2 not oÂnly cools both high performance GPUs, absolutely noiseless and maintenance free, but it also achieves a far lower temperature when compared to the standard coolers and thus offers overclocking potential and a longer service life.
To further improve the cooling performance, the Turbo Module - a twin fan add-on, is recommended for all enthusiast gamers.
* GeForce 8800GTS(G92): In order to guarantee sufficient cooling performance, a Turbo Module may be added.
GeForce 8800GT / 8800GTS (G92) installation tips (same as HD 3850):
Remove all screws at the back side of the card.
Clean the GPU and the voltage regulators with paper tissues cautiosly. Memory chips need to be rubbed additionally with an eraser thoroughly. Any residues will greatly affect the adhesiveness of the thermal tape.
Stick the provided RAM heatsinks oÂn all the RAM chips.
The card doesn't need voltage regulator heat sinks to operate. We tested that the card just ran flawlessly without voltage regulator heat sinks.
Intall the Accelero S1 Rev. 2 as usual by referring the installation manual.
Radeon HD 3870 installation tips:
Only remove 4 screws located at the center of the back side of the card. Keep the pre-installed RAM heatsink and Voltage regulator heatsink without remove them.
Clean the GPU with paper tissues cautiosly.
Intall the Accelero S1 Rev. 2 as usual by referring the installation manual.
SLI Compatibility
Accelero S1 Rev.2 is compatible with SLI configuration by having a longer flexible SLI cable to go around the top of heat sink that connects both cards. The bundled SLI cable from motherboard is usually not long enough. A 12cm long SLI cable can be purchase in our online Shop if necessary.
Voltage Regulator Heat Spreader Module Voltage Regulator heat spreader module is designed to fit for all X1950Pro graphic cards meeting ATI standard layout (reference design). However there are not every graphic card manufacturers following the standard board design. For example some AGP graphic cards have difference layout and some designs basically not required to install Heat Spreader. The following drawings show the ATI standard board layout with Voltage Regulator Heat Spreader installation. Please check your graphic card to have the proper installation of the Voltage Regulator Heat Spreader.
Mod of Voltage Regulator Heat Spreader Module for Sapphire X1950Pro AGP Since Sapphire X1950Pro AGP card places 2 power sockets oÂn the card and oÂne of the power socket conflicts with the Voltage Regulator Heat Spreader Module. Users can cut off a small piece of Voltage Regulator Heat Spreader away to resolve the conflict. Another method is to stick RAM heat sinks oÂn the voltage regulator for heat dissipation.
The modded Voltage Regulator Heat Spreader Module installed oÂn Sapphire X1950Pro AGP card.
Compatibility With this height restriction drawing you can check your VGA board for compatibility with our cooler. First you have to check the position of the mounting holes. Then check the height of the components.
If some components are slightly higher than our fancasing allows, you can relatively easy cut the fan casing. To do so we suggest you first to uninstall the fancasing bottom. Then cut the bottom in the area of the component that caused the conflict and reinstall the bottom again.
The award winning passive VGA cooler extends its compatibility to the latest graphic cards The Accelero S1 Rev. 2 dramatically extends the compatibility to many of the latest graphic cards. It supports high-end to main stream graphic cards including the latest hot selling Radeon HD 3870, 3850 , GeForce 8800GTS (G92) and 8800GT.
The Accelero S1 Rev. 2 now comes with a new flexible mounting mechanism, multiple screw hole sets and modifications to the heatpipes enabling it to fit a wider range of leading graphic cards. As a result more gamers can benefit from adopting the Accelero S1 Rev. 2 which dramatically improves their gaming experience.
.
To provide passive cooling for high-end graphic cards, Accelero S1 Rev. 2 is a high performance passive cooler featuring 4 heatpipes connected with extra large surface area. It effectively removes a great deal of heat from the graphic cards keeping the components cool. Thanks to the elegant design, Accelero S1 Rev. 2 outperforms active cooling solutions. Accelero S1 Rev. 2 creates a true industry leading zero noise cooling solution for all enthusiast gamers.
Noiseless Cooling
4 Heat Pipes
Special Heat Spreader for Voltage Regulator Cooling
Memory Cooling
High Reliability
Low Weight
6 Years Warranty
The cold air is drawn from outside to cool the fins directly:
The fins design optimize for air ventilation that enhance cooling performance:
Accelero S1 Rev. 2 features 4 thick copper heatpipes which connect directly from the GPU core. The heatpipes with sintered powder wicks provide ultimate heat conductivity. Heat from the GPU is rapidly dissipated through 32 fins that extend beyond the height of the graphic card. Optimized fin design allows better air flow thus removing the heat more effectively. Together with the bundled RAM heat sinks and voltage regulator heat spreader, Accelero S1 Rev. 2 provides an all-round passive solution that achieves the best cooling performance.
Noise Level:
Temperature oÂn ATI X1950Pro:
Never compromised oÂn noise Install and forget about it – No moving parts means it is maintenance free. An extra pair of mounting clips provides extensive protection to the graphic card that prevents damage from improper handling. With the help of the new mounting design, Accelero S1 Rev. 2 is widely compatible with high end ATI and nVIDIA graphic cards.
Accelero S1 Rev. 2 can still be paired with the Turbo Module – the twin fans add-on, which further increases the potential power of Accelero S1 Rev. 2 with enhanced cooling performance under extremely quiet operation. Turbo Module helps boost up the GPU and memory overclockability, squeezing more graphic performance than ever before.
Specifications:
Heat Sink:
138(L) x 215(W) x 33(H) mm
Heat pipe:
6 mm x 4
Weight:
268 g
Accessories:
2 Voltage Regulator Heat Spreaders
Â
8 Memory Heat Sinks
Warranty:
6 Years
Â
Â
Â
Compatibility:
The Accelero S1 Rev. 2 is fully compatible with GeForce 8800GTS(G92)* / 8800GT and Radeon HD 3870 / 3850 graphic cards. Using the Accelero S1 Rev. 2, both Radeon HD 3870 / 3850 and GeForce 8800GTS(G92)* / 8800GT graphic cards have been tested and confirmed that they operate well within the specifications under full load operation. The Accelero S1 Rev. 2 not oÂnly cools both high performance GPUs, absolutely noiseless and maintenance free, but it also achieves a far lower temperature when compared to the standard coolers and thus offers overclocking potential and a longer service life.
To further improve the cooling performance, the Turbo Module - a twin fan add-on, is recommended for all enthusiast gamers.
* GeForce 8800GTS(G92): In order to guarantee sufficient cooling performance, a Turbo Module may be added.
GeForce 8800GT / 8800GTS (G92) installation tips (same as HD 3850):
Remove all screws at the back side of the card.
Clean the GPU and the voltage regulators with paper tissues cautiosly. Memory chips need to be rubbed additionally with an eraser thoroughly. Any residues will greatly affect the adhesiveness of the thermal tape.
Stick the provided RAM heatsinks oÂn all the RAM chips.
The card doesn't need voltage regulator heat sinks to operate. We tested that the card just ran flawlessly without voltage regulator heat sinks.
Intall the Accelero S1 Rev. 2 as usual by referring the installation manual.
Radeon HD 3870 installation tips:
Only remove 4 screws located at the center of the back side of the card. Keep the pre-installed RAM heatsink and Voltage regulator heatsink without remove them.
Clean the GPU with paper tissues cautiosly.
Intall the Accelero S1 Rev. 2 as usual by referring the installation manual.
SLI Compatibility
Accelero S1 Rev.2 is compatible with SLI configuration by having a longer flexible SLI cable to go around the top of heat sink that connects both cards. The bundled SLI cable from motherboard is usually not long enough. A 12cm long SLI cable can be purchase in our online Shop if necessary.
Voltage Regulator Heat Spreader Module Voltage Regulator heat spreader module is designed to fit for all X1950Pro graphic cards meeting ATI standard layout (reference design). However there are not every graphic card manufacturers following the standard board design. For example some AGP graphic cards have difference layout and some designs basically not required to install Heat Spreader. The following drawings show the ATI standard board layout with Voltage Regulator Heat Spreader installation. Please check your graphic card to have the proper installation of the Voltage Regulator Heat Spreader.
Mod of Voltage Regulator Heat Spreader Module for Sapphire X1950Pro AGP Since Sapphire X1950Pro AGP card places 2 power sockets oÂn the card and oÂne of the power socket conflicts with the Voltage Regulator Heat Spreader Module. Users can cut off a small piece of Voltage Regulator Heat Spreader away to resolve the conflict. Another method is to stick RAM heat sinks oÂn the voltage regulator for heat dissipation.
The modded Voltage Regulator Heat Spreader Module installed oÂn Sapphire X1950Pro AGP card.
Compatibility With this height restriction drawing you can check your VGA board for compatibility with our cooler. First you have to check the position of the mounting holes. Then check the height of the components.
If some components are slightly higher than our fancasing allows, you can relatively easy cut the fan casing. To do so we suggest you first to uninstall the fancasing bottom. Then cut the bottom in the area of the component that caused the conflict and reinstall the bottom again.
https://www.performance-pcs.com/arctic-cooling-accelero-s1-rev2-for-8800gtsg92-8800gt-radeon-hd-3870-3850-more-accels1r2.html4277Arctic Cooling Accelero S1 Rev2 for 8800GTS(G92), 8800GT, Radeon HD 3870, 3850, morehttps://www.performance-pcs.com/media/catalog/product/t/m/tmpaccs1r2_02.jpg14.9829.9500USDInStock/Air Cooling/Video Card Coolers<h3><font face="Tahoma">Product Details:</font></h3><table style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" height="100%" cellspacing="0" cellpadding="0" width="747" border="0"><tbody><tr><td style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" valign="top"><table style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" height="100%" cellspacing="0" cellpadding="0" width="740" border="0"><tbody><tr><td style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" valign="top" width="740"><table style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" cellspacing="0" cellpadding="0" width="740" border="0"><tbody><tr><td style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana"><table style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" cellspacing="0" cellpadding="0" width="740" border="0"><tbody><tr><td class="balszoveg" valign="top" width="477"><font face="Tahoma" size="2"><font color="#000000"><strong>The award winning passive VGA cooler extends its compatibility to the latest graphic cards</strong><br />The Accelero S1 Rev. 2 dramatically extends the compatibility to many of the latest graphic cards. It supports high-end to main stream graphic cards including the latest hot selling Radeon HD 3870, 3850 , GeForce 8800GTS (G92) and 8800GT.</font></font><p><font face="Tahoma" color="#000000" size="2">The Accelero S1 Rev. 2 now comes with a new flexible mounting mechanism, multiple screw hole sets and modifications to the heatpipes enabling it to fit a wider range of leading graphic cards. As a result more gamers can benefit from adopting the Accelero S1 Rev. 2 which dramatically improves their gaming experience.<br /><br /><img hspace="0" src="/media/descriptions/23079-AccS1Rev2_Mount_313.jpg" align="bottom" border="0" />.</font></p><font face="Tahoma" color="#000000" size="2">To provide passive cooling for high-end graphic cards, Accelero S1 Rev. 2 is a high performance passive cooler featuring 4 heatpipes connected with extra large surface area. It effectively removes a great deal of heat from the graphic cards keeping the components cool. Thanks to the elegant design, Accelero S1 Rev. 2 outperforms active cooling solutions. Accelero S1 Rev. 2 creates a true industry leading zero noise cooling solution for all enthusiast gamers. </font><ul><li><font face="Tahoma" size="2"><font color="#000000"><strong>Noiseless Cooling</strong> </font></font></li><li><font face="Tahoma" size="2"><font color="#000000"><strong>4 Heat Pipes</strong> </font></font></li><li><font face="Tahoma" size="2"><font color="#000000"><strong>Special Heat Spreader for Voltage Regulator Cooling</strong> </font></font></li><li><font face="Tahoma" size="2"><font color="#000000"><strong>Memory Cooling</strong> </font></font></li><li><font face="Tahoma" size="2"><font color="#000000"><strong>High Reliability</strong> </font></font></li><li><font face="Tahoma" size="2"><font color="#000000"><strong>Low Weight</strong> </font></font></li><li><font face="Tahoma" color="#000000" size="2"><strong>6 Years Warranty</strong></font></li></ul><p><font face="Tahoma" size="2"><font color="#000000"><strong>The cold air is drawn from outside to cool the fins directly:</strong><br /><img src="/media/descriptions/23079-AccS1_Cooling0_320.jpg" /></font></font></p><p><font face="Tahoma" size="2"><font color="#000000"><strong>The fins design optimize for air ventilation that enhance cooling performance:</strong><br /><img src="/media/descriptions/23079-AccS1_Cooling1_320.jpg" /></font></font></p><p><font face="Tahoma" color="#000000" size="2">Accelero S1 Rev. 2 features 4 thick copper heatpipes which connect directly from the GPU core. The heatpipes with sintered powder wicks provide ultimate heat conductivity. Heat from the GPU is rapidly dissipated through 32 fins that extend beyond the height of the graphic card. Optimized fin design allows better air flow thus removing the heat more effectively. Together with the bundled RAM heat sinks and voltage regulator heat spreader, Accelero S1 Rev. 2 provides an all-round passive solution that achieves the best cooling performance.</font></p><p><font face="Tahoma" size="2"><font color="#000000"><strong>Noise Level:</strong><br /><img src="/media/descriptions/23079-AccS1_Noise.gif" /></font></font></p><p><font face="Tahoma" size="2"><font color="#000000"><strong>Temperature oÂn ATI X1950Pro:</strong><br /><img src="/media/descriptions/23079-AccS1_Temp.gif" /></font></font></p><p><font face="Tahoma" size="2"><font color="#000000"><strong>Never compromised oÂn noise</strong><br />Install and forget about it – No moving parts means it is maintenance free. An extra pair of mounting clips provides extensive protection to the graphic card that prevents damage from improper handling. With the help of the new mounting design, Accelero S1 Rev. 2 is widely compatible with high end ATI and nVIDIA graphic cards.</font></font></p><p><font face="Tahoma" color="#000000" size="2">Accelero S1 Rev. 2 can still be paired with the Turbo Module – the twin fans add-on, which further increases the potential power of Accelero S1 Rev. 2 with enhanced cooling performance under extremely quiet operation. Turbo Module helps boost up the GPU and memory overclockability, squeezing more graphic performance than ever before.</font></p></td></tr></tbody></table></td></tr></tbody></table></td></tr></tbody></table></td></tr></tbody></table><p><font face="Tahoma" color="#000000" size="2"><b>Specifications:</b></font></p><table width="51%" border="0"><tbody><tr><td><table style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" cellpadding="2" align="left" border="1" eidth="470"><tbody><tr><td align="left" width="230"><font face="Tahoma" color="#000000" size="2"><strong>Heat Sink:</strong></font></td><td align="left" width="230"><font face="Tahoma" color="#000000" size="2">138(L) x 215(W) x 33(H) mm</font></td></tr><tr><td align="left" width="230"><font face="Tahoma" color="#000000" size="2"><strong>Heat pipe:</strong></font></td><td align="left" width="230"><font face="Tahoma" color="#000000" size="2">6 mm x 4</font></td></tr><tr><td align="left" width="230"><font face="Tahoma" color="#000000" size="2"><strong>Weight:</strong></font></td><td align="left" width="230"><font face="Tahoma" color="#000000" size="2">268 g</font></td></tr><tr><td align="left" width="230"><font face="Tahoma" color="#000000" size="2"><strong>Accessories:</strong></font></td><td align="left" width="230"><font face="Tahoma" color="#000000" size="2">2 Voltage Regulator Heat Spreaders</font></td></tr><tr><td align="left" width="230"><font color="#000000"> </font></td><td align="left" width="230"><font face="Tahoma" color="#000000" size="2">8 Memory Heat Sinks</font></td></tr><tr><td align="left" width="230"><font face="Tahoma" color="#000000" size="2"><strong>Warranty:</strong></font></td><td align="left" width="230"><font face="Tahoma" color="#000000" size="2">6 Years</font></td></tr></tbody></table><p><font color="#000000"> </font></p><p><font color="#000000"> </font></p></td></tr><tr><td><div id="alli"><table style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" height="100%" cellspacing="0" cellpadding="0" width="788" border="0"><tbody><tr><td valign="top"><table style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" height="100%" cellspacing="0" cellpadding="0" width="744" border="0"><tbody><tr><td valign="top" width="744"><table style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" cellspacing="0" cellpadding="0" width="679" border="0"><tbody><tr><td><table style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" cellspacing="0" cellpadding="0" width="740" border="0"><tbody><tr><td class="balszoveg" valign="top" width="477"><font color="#000000"> </font><p><font face="Tahoma" color="#000000" size="2"><b>Compatibility:</b></font></p><p><font face="Tahoma" color="#000000" size="2">The Accelero S1 Rev. 2 is fully compatible with GeForce 8800GTS(G92)* / 8800GT and Radeon HD 3870 / 3850 graphic cards. Using the Accelero S1 Rev. 2, <strong>both Radeon HD 3870 / 3850 and GeForce 8800GTS(G92)* / 8800GT graphic cards have been tested and confirmed that they operate well within the specifications under full load operation</strong>. The Accelero S1 Rev. 2 not oÂnly cools both high performance GPUs, absolutely noiseless and maintenance free, but it also achieves a far lower temperature when compared to the standard coolers and thus offers overclocking potential and a longer service life. </font></p><p><font face="Tahoma" color="#000000" size="2">To further improve the cooling performance, the </font><a style="FONT-WEIGHT: normal; FONT-FAMILY: Tahoma; TEXT-ALIGN: center; TEXT-DECORATION: underline" href="http://www.arctic-cooling.com/vga2.php?idx=139"><strong><font color="#000000" size="2">Turbo Module</font></strong></a><font face="Tahoma" color="#000000" size="2"> - a twin fan add-on, is recommended for all enthusiast gamers.<br /><br />* GeForce 8800GTS(G92): In order to guarantee sufficient cooling performance, a </font><a style="FONT-WEIGHT: normal; FONT-FAMILY: Tahoma; TEXT-ALIGN: center; TEXT-DECORATION: underline" href="http://www.arctic-cooling.com/vga2.php?idx=139"><strong><font color="#000000" size="2">Turbo Module</font></strong></a><font face="Tahoma" size="2"><font color="#000000"> may be added.<br /><br /></font><font color="#000000"><em>GeForce 8800GT / 8800GTS (G92) installation tips (same as HD 3850):<br /></em><img hspace="0" src="/media/descriptions/23079-S1_8800GT_pic1_230.jpg" align="bottom" border="0" /> <img hspace="0" src="/media/descriptions/23079-S1_8800GT_pic2_230.jpg" align="bottom" border="0" /> </font></font></p><li><font face="Tahoma" color="#000000" size="2">Remove all screws at the back side of the card. </font></li><li><font face="Tahoma" color="#000000" size="2">Clean the GPU and the voltage regulators with paper tissues cautiosly. Memory chips need to be rubbed additionally with an eraser thoroughly. Any residues will greatly affect the adhesiveness of the thermal tape. </font></li><li><font face="Tahoma" color="#000000" size="2">Stick the provided RAM heatsinks oÂn all the RAM chips. </font></li><li><font face="Tahoma" color="#000000" size="2">The card doesn't need voltage regulator heat sinks to operate. We tested that the card just ran flawlessly without voltage regulator heat sinks.<br /><img hspace="0" src="/media/descriptions/23079-S1_8800GT_pic3_230.jpg" align="bottom" border="0" /> <img hspace="0" src="/media/descriptions/23079-S1_8800GT_pic4_230.jpg" align="bottom" border="0" /> </font></li><li><font face="Tahoma" color="#000000" size="2">Intall the Accelero S1 Rev. 2 as usual by referring the installation manual. </font><p><font face="Tahoma" size="2"><font color="#000000"><em>Radeon HD 3870 installation tips:<br /></em><img hspace="0" src="/media/descriptions/23079-S1_HD3870_pic1_230.jpg" align="bottom" border="0" /> <img hspace="0" src="/media/descriptions/23079-S1_HD3870_pic2_230.jpg" align="bottom" border="0" /> </font></font></p></li><li><font face="Tahoma" color="#000000" size="2">Only remove 4 screws located at the center of the back side of the card. Keep the pre-installed RAM heatsink and Voltage regulator heatsink without remove them. </font></li><li><font face="Tahoma" color="#000000" size="2">Clean the GPU with paper tissues cautiosly.<br /><img hspace="0" src="/media/descriptions/23079-S1_HD3870_pic3_230.jpg" align="bottom" border="0" /> <img hspace="0" src="/media/descriptions/23079-S1_HD3870_pic4_230.jpg" align="bottom" border="0" /> </font></li><li><font face="Tahoma" color="#000000" size="2">Intall the Accelero S1 Rev. 2 as usual by referring the installation manual. </font><p><font face="Tahoma" size="2"><font color="#000000"><strong>SLI Compatibility</strong><br /><br /><img hspace="0" src="/media/descriptions/23079-SLI_Flex_Long1.jpg" align="bottom" border="0" /><br /><br />Accelero S1 Rev.2 is compatible with SLI configuration by having a longer <b>flexible SLI cable</b> to go around the top of heat sink that connects both cards. The bundled SLI cable from motherboard is usually not long enough. A 12cm long SLI cable can be purchase in our </font></font><a style="FONT-WEIGHT: normal; FONT-FAMILY: Tahoma; TEXT-ALIGN: center; TEXT-DECORATION: underline" href="http://stores.ebay.com/Arctic-Cooling-RMA-parts" target="_blank"><b><font color="#000000" size="2">online Shop</font></b></a><font face="Tahoma" color="#000000" size="2"> if necessary. <br /><br /><img hspace="0" src="/media/descriptions/23079-SLI_Flex_Long2.jpg" align="bottom" border="0" /> <img hspace="0" src="/media/descriptions/23079-SLI_Flex_Long3.jpg" align="bottom" border="0" /></font></p><p><strong><font face="Tahoma" color="#000000" size="2">ATI Radeon X1950Pro requires an extra </font><a style="FONT-WEIGHT: normal; FONT-FAMILY: Tahoma; TEXT-ALIGN: center; TEXT-DECORATION: underline" href="http://www.arctic-cooling.com/vga2.php?idx=90&data=3&disc="><font color="#000000" size="2">Voltage Regulator Heat Spreader Module</font></a><font face="Tahoma" color="#000000" size="2">.</font></strong></p><p><strong><font face="Tahoma" color="#000000" size="2">ATI Radeon X1950XTX (PWM edition) </font><a style="FONT-WEIGHT: normal; FONT-FAMILY: Tahoma; TEXT-ALIGN: center; TEXT-DECORATION: underline" href="http://www.arctic-cooling.com/downloads/compatibility/Mod_AcceleroX2_X1950XTX_PWM.pdf" target="_blank"><font color="#000000" size="2">modifications instructions</font></a></strong></p><p><font face="Tahoma" size="2"><font color="#000000"><strong>Voltage Regulator Heat Spreader Module</strong><br />Voltage Regulator heat spreader module is designed to fit for all X1950Pro graphic cards meeting ATI standard layout (reference design). However there are not every graphic card manufacturers following the standard board design. For example some AGP graphic cards have difference layout and some designs basically not required to install Heat Spreader. The following drawings show the ATI standard board layout with Voltage Regulator Heat Spreader installation. Please check your graphic card to have the proper installation of the Voltage Regulator Heat Spreader.</font></font></p><p><font face="Tahoma" color="#000000" size="2"><img hspace="0" src="/media/descriptions/23079-VRHSM_2D.gif" align="bottom" border="0" /><br /><br /><img hspace="0" src="/media/descriptions/23079-VRHSM_3D.gif" align="bottom" border="0" /></font></p><p><font face="Tahoma" size="2"><font color="#000000"><strong>Mod of Voltage Regulator Heat Spreader Module for Sapphire X1950Pro AGP</strong><br />Since Sapphire X1950Pro AGP card places 2 power sockets oÂn the card and oÂne of the power socket conflicts with the Voltage Regulator Heat Spreader Module. Users can cut off a small piece of Voltage Regulator Heat Spreader away to resolve the conflict. Another method is to stick RAM heat sinks oÂn the voltage regulator for heat dissipation. </font></font></p><p><font face="Tahoma" color="#000000" size="2"><img hspace="0" src="/media/descriptions/23079-AccX2_VRHSM_Sap.jpg" align="bottom" border="0" /><br />The modded Voltage Regulator Heat Spreader Module installed oÂn Sapphire X1950Pro AGP card.</font></p><p><font face="Tahoma" size="2"><font color="#000000"><strong>Compatibility</strong><br />With this </font></font><a style="FONT-WEIGHT: normal; FONT-FAMILY: Tahoma; TEXT-ALIGN: center; TEXT-DECORATION: underline" href="http://www.arctic-cooling.com/downloads/compatibility/height_restriction_drawing_AcceleroS1_r2.pdf" target="_blank"><strong><font color="#000000" size="2">height restriction drawing</font></strong></a><font face="Tahoma" color="#000000" size="2"> you can check your VGA board for compatibility with our cooler.<br />First you have to check the position of the mounting holes. Then check the height of the components.<br /><br />If some components are slightly higher than our fancasing allows, you can relatively easy cut the fan casing.<br />To do so we suggest you first to uninstall the fancasing bottom. Then cut the bottom in the area of the component that caused the conflict and reinstall the bottom again.</font></p></li></td></tr></tbody></table></td></tr></tbody></table></td></tr></tbody></table></td></tr></tbody></table></div><p> </p></td></tr></tbody></table> <h3><font face="Tahoma">Product Details:</font></h3><table style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" height="100%" cellspacing="0" cellpadding="0" width="747" border="0"><tbody><tr><td style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" valign="top"><table style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" height="100%" cellspacing="0" cellpadding="0" width="740" border="0"><tbody><tr><td style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" valign="top" width="740"><table style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" cellspacing="0" cellpadding="0" width="740" border="0"><tbody><tr><td style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana"><table style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" cellspacing="0" cellpadding="0" width="740" border="0"><tbody><tr><td class="balszoveg" valign="top" width="477"><font face="Tahoma" size="2"><font color="#000000"><strong>The award winning passive VGA cooler extends its compatibility to the latest graphic cards</strong><br />The Accelero S1 Rev. 2 dramatically extends the compatibility to many of the latest graphic cards. It supports high-end to main stream graphic cards including the latest hot selling Radeon HD 3870, 3850 , GeForce 8800GTS (G92) and 8800GT.</font></font><p><font face="Tahoma" color="#000000" size="2">The Accelero S1 Rev. 2 now comes with a new flexible mounting mechanism, multiple screw hole sets and modifications to the heatpipes enabling it to fit a wider range of leading graphic cards. As a result more gamers can benefit from adopting the Accelero S1 Rev. 2 which dramatically improves their gaming experience.<br /><br /><img hspace="0" src="/media/descriptions/23079-AccS1Rev2_Mount_313.jpg" align="bottom" border="0" />.</font></p><font face="Tahoma" color="#000000" size="2">To provide passive cooling for high-end graphic cards, Accelero S1 Rev. 2 is a high performance passive cooler featuring 4 heatpipes connected with extra large surface area. It effectively removes a great deal of heat from the graphic cards keeping the components cool. Thanks to the elegant design, Accelero S1 Rev. 2 outperforms active cooling solutions. Accelero S1 Rev. 2 creates a true industry leading zero noise cooling solution for all enthusiast gamers. </font><ul><li><font face="Tahoma" size="2"><font color="#000000"><strong>Noiseless Cooling</strong> </font></font></li><li><font face="Tahoma" size="2"><font color="#000000"><strong>4 Heat Pipes</strong> </font></font></li><li><font face="Tahoma" size="2"><font color="#000000"><strong>Special Heat Spreader for Voltage Regulator Cooling</strong> </font></font></li><li><font face="Tahoma" size="2"><font color="#000000"><strong>Memory Cooling</strong> </font></font></li><li><font face="Tahoma" size="2"><font color="#000000"><strong>High Reliability</strong> </font></font></li><li><font face="Tahoma" size="2"><font color="#000000"><strong>Low Weight</strong> </font></font></li><li><font face="Tahoma" color="#000000" size="2"><strong>6 Years Warranty</strong></font></li></ul><p><font face="Tahoma" size="2"><font color="#000000"><strong>The cold air is drawn from outside to cool the fins directly:</strong><br /><img src="/media/descriptions/23079-AccS1_Cooling0_320.jpg" /></font></font></p><p><font face="Tahoma" size="2"><font color="#000000"><strong>The fins design optimize for air ventilation that enhance cooling performance:</strong><br /><img src="/media/descriptions/23079-AccS1_Cooling1_320.jpg" /></font></font></p><p><font face="Tahoma" color="#000000" size="2">Accelero S1 Rev. 2 features 4 thick copper heatpipes which connect directly from the GPU core. The heatpipes with sintered powder wicks provide ultimate heat conductivity. Heat from the GPU is rapidly dissipated through 32 fins that extend beyond the height of the graphic card. Optimized fin design allows better air flow thus removing the heat more effectively. Together with the bundled RAM heat sinks and voltage regulator heat spreader, Accelero S1 Rev. 2 provides an all-round passive solution that achieves the best cooling performance.</font></p><p><font face="Tahoma" size="2"><font color="#000000"><strong>Noise Level:</strong><br /><img src="/media/descriptions/23079-AccS1_Noise.gif" /></font></font></p><p><font face="Tahoma" size="2"><font color="#000000"><strong>Temperature oÂn ATI X1950Pro:</strong><br /><img src="/media/descriptions/23079-AccS1_Temp.gif" /></font></font></p><p><font face="Tahoma" size="2"><font color="#000000"><strong>Never compromised oÂn noise</strong><br />Install and forget about it – No moving parts means it is maintenance free. An extra pair of mounting clips provides extensive protection to the graphic card that prevents damage from improper handling. With the help of the new mounting design, Accelero S1 Rev. 2 is widely compatible with high end ATI and nVIDIA graphic cards.</font></font></p><p><font face="Tahoma" color="#000000" size="2">Accelero S1 Rev. 2 can still be paired with the Turbo Module – the twin fans add-on, which further increases the potential power of Accelero S1 Rev. 2 with enhanced cooling performance under extremely quiet operation. Turbo Module helps boost up the GPU and memory overclockability, squeezing more graphic performance than ever before.</font></p></td></tr></tbody></table></td></tr></tbody></table></td></tr></tbody></table></td></tr></tbody></table><p><font face="Tahoma" color="#000000" size="2"><b>Specifications:</b></font></p><table width="51%" border="0"><tbody><tr><td><table style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" cellpadding="2" align="left" border="1" eidth="470"><tbody><tr><td align="left" width="230"><font face="Tahoma" color="#000000" size="2"><strong>Heat Sink:</strong></font></td><td align="left" width="230"><font face="Tahoma" color="#000000" size="2">138(L) x 215(W) x 33(H) mm</font></td></tr><tr><td align="left" width="230"><font face="Tahoma" color="#000000" size="2"><strong>Heat pipe:</strong></font></td><td align="left" width="230"><font face="Tahoma" color="#000000" size="2">6 mm x 4</font></td></tr><tr><td align="left" width="230"><font face="Tahoma" color="#000000" size="2"><strong>Weight:</strong></font></td><td align="left" width="230"><font face="Tahoma" color="#000000" size="2">268 g</font></td></tr><tr><td align="left" width="230"><font face="Tahoma" color="#000000" size="2"><strong>Accessories:</strong></font></td><td align="left" width="230"><font face="Tahoma" color="#000000" size="2">2 Voltage Regulator Heat Spreaders</font></td></tr><tr><td align="left" width="230"><font color="#000000"> </font></td><td align="left" width="230"><font face="Tahoma" color="#000000" size="2">8 Memory Heat Sinks</font></td></tr><tr><td align="left" width="230"><font face="Tahoma" color="#000000" size="2"><strong>Warranty:</strong></font></td><td align="left" width="230"><font face="Tahoma" color="#000000" size="2">6 Years</font></td></tr></tbody></table><p><font color="#000000"> </font></p><p><font color="#000000"> </font></p></td></tr><tr><td><div id="alli"><table style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" height="100%" cellspacing="0" cellpadding="0" width="788" border="0"><tbody><tr><td valign="top"><table style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" height="100%" cellspacing="0" cellpadding="0" width="744" border="0"><tbody><tr><td valign="top" width="744"><table style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" cellspacing="0" cellpadding="0" width="679" border="0"><tbody><tr><td><table style="FONT-SIZE: 11px; COLOR: rgb(6,51,106); FONT-FAMILY: Arial,Helvetica,Verdana" cellspacing="0" cellpadding="0" width="740" border="0"><tbody><tr><td class="balszoveg" valign="top" width="477"><font color="#000000"> </font><p><font face="Tahoma" color="#000000" size="2"><b>Compatibility:</b></font></p><p><font face="Tahoma" color="#000000" size="2">The Accelero S1 Rev. 2 is fully compatible with GeForce 8800GTS(G92)* / 8800GT and Radeon HD 3870 / 3850 graphic cards. Using the Accelero S1 Rev. 2, <strong>both Radeon HD 3870 / 3850 and GeForce 8800GTS(G92)* / 8800GT graphic cards have been tested and confirmed that they operate well within the specifications under full load operation</strong>. The Accelero S1 Rev. 2 not oÂnly cools both high performance GPUs, absolutely noiseless and maintenance free, but it also achieves a far lower temperature when compared to the standard coolers and thus offers overclocking potential and a longer service life. </font></p><p><font face="Tahoma" color="#000000" size="2">To further improve the cooling performance, the </font><a style="FONT-WEIGHT: normal; FONT-FAMILY: Tahoma; TEXT-ALIGN: center; TEXT-DECORATION: underline" href="http://www.arctic-cooling.com/vga2.php?idx=139"><strong><font color="#000000" size="2">Turbo Module</font></strong></a><font face="Tahoma" color="#000000" size="2"> - a twin fan add-on, is recommended for all enthusiast gamers.<br /><br />* GeForce 8800GTS(G92): In order to guarantee sufficient cooling performance, a </font><a style="FONT-WEIGHT: normal; FONT-FAMILY: Tahoma; TEXT-ALIGN: center; TEXT-DECORATION: underline" href="http://www.arctic-cooling.com/vga2.php?idx=139"><strong><font color="#000000" size="2">Turbo Module</font></strong></a><font face="Tahoma" size="2"><font color="#000000"> may be added.<br /><br /></font><font color="#000000"><em>GeForce 8800GT / 8800GTS (G92) installation tips (same as HD 3850):<br /></em><img hspace="0" src="/media/descriptions/23079-S1_8800GT_pic1_230.jpg" align="bottom" border="0" /> <img hspace="0" src="/media/descriptions/23079-S1_8800GT_pic2_230.jpg" align="bottom" border="0" /> </font></font></p><li><font face="Tahoma" color="#000000" size="2">Remove all screws at the back side of the card. </font></li><li><font face="Tahoma" color="#000000" size="2">Clean the GPU and the voltage regulators with paper tissues cautiosly. Memory chips need to be rubbed additionally with an eraser thoroughly. Any residues will greatly affect the adhesiveness of the thermal tape. </font></li><li><font face="Tahoma" color="#000000" size="2">Stick the provided RAM heatsinks oÂn all the RAM chips. </font></li><li><font face="Tahoma" color="#000000" size="2">The card doesn't need voltage regulator heat sinks to operate. We tested that the card just ran flawlessly without voltage regulator heat sinks.<br /><img hspace="0" src="/media/descriptions/23079-S1_8800GT_pic3_230.jpg" align="bottom" border="0" /> <img hspace="0" src="/media/descriptions/23079-S1_8800GT_pic4_230.jpg" align="bottom" border="0" /> </font></li><li><font face="Tahoma" color="#000000" size="2">Intall the Accelero S1 Rev. 2 as usual by referring the installation manual. </font><p><font face="Tahoma" size="2"><font color="#000000"><em>Radeon HD 3870 installation tips:<br /></em><img hspace="0" src="/media/descriptions/23079-S1_HD3870_pic1_230.jpg" align="bottom" border="0" /> <img hspace="0" src="/media/descriptions/23079-S1_HD3870_pic2_230.jpg" align="bottom" border="0" /> </font></font></p></li><li><font face="Tahoma" color="#000000" size="2">Only remove 4 screws located at the center of the back side of the card. Keep the pre-installed RAM heatsink and Voltage regulator heatsink without remove them. </font></li><li><font face="Tahoma" color="#000000" size="2">Clean the GPU with paper tissues cautiosly.<br /><img hspace="0" src="/media/descriptions/23079-S1_HD3870_pic3_230.jpg" align="bottom" border="0" /> <img hspace="0" src="/media/descriptions/23079-S1_HD3870_pic4_230.jpg" align="bottom" border="0" /> </font></li><li><font face="Tahoma" color="#000000" size="2">Intall the Accelero S1 Rev. 2 as usual by referring the installation manual. </font><p><font face="Tahoma" size="2"><font color="#000000"><strong>SLI Compatibility</strong><br /><br /><img hspace="0" src="/media/descriptions/23079-SLI_Flex_Long1.jpg" align="bottom" border="0" /><br /><br />Accelero S1 Rev.2 is compatible with SLI configuration by having a longer <b>flexible SLI cable</b> to go around the top of heat sink that connects both cards. The bundled SLI cable from motherboard is usually not long enough. A 12cm long SLI cable can be purchase in our </font></font><a style="FONT-WEIGHT: normal; FONT-FAMILY: Tahoma; TEXT-ALIGN: center; TEXT-DECORATION: underline" href="http://stores.ebay.com/Arctic-Cooling-RMA-parts" target="_blank"><b><font color="#000000" size="2">online Shop</font></b></a><font face="Tahoma" color="#000000" size="2"> if necessary. <br /><br /><img hspace="0" src="/media/descriptions/23079-SLI_Flex_Long2.jpg" align="bottom" border="0" /> <img hspace="0" src="/media/descriptions/23079-SLI_Flex_Long3.jpg" align="bottom" border="0" /></font></p><p><strong><font face="Tahoma" color="#000000" size="2">ATI Radeon X1950Pro requires an extra </font><a style="FONT-WEIGHT: normal; FONT-FAMILY: Tahoma; TEXT-ALIGN: center; TEXT-DECORATION: underline" href="http://www.arctic-cooling.com/vga2.php?idx=90&data=3&disc="><font color="#000000" size="2">Voltage Regulator Heat Spreader Module</font></a><font face="Tahoma" color="#000000" size="2">.</font></strong></p><p><strong><font face="Tahoma" color="#000000" size="2">ATI Radeon X1950XTX (PWM edition) </font><a style="FONT-WEIGHT: normal; FONT-FAMILY: Tahoma; TEXT-ALIGN: center; TEXT-DECORATION: underline" href="http://www.arctic-cooling.com/downloads/compatibility/Mod_AcceleroX2_X1950XTX_PWM.pdf" target="_blank"><font color="#000000" size="2">modifications instructions</font></a></strong></p><p><font face="Tahoma" size="2"><font color="#000000"><strong>Voltage Regulator Heat Spreader Module</strong><br />Voltage Regulator heat spreader module is designed to fit for all X1950Pro graphic cards meeting ATI standard layout (reference design). However there are not every graphic card manufacturers following the standard board design. For example some AGP graphic cards have difference layout and some designs basically not required to install Heat Spreader. The following drawings show the ATI standard board layout with Voltage Regulator Heat Spreader installation. Please check your graphic card to have the proper installation of the Voltage Regulator Heat Spreader.</font></font></p><p><font face="Tahoma" color="#000000" size="2"><img hspace="0" src="/media/descriptions/23079-VRHSM_2D.gif" align="bottom" border="0" /><br /><br /><img hspace="0" src="/media/descriptions/23079-VRHSM_3D.gif" align="bottom" border="0" /></font></p><p><font face="Tahoma" size="2"><font color="#000000"><strong>Mod of Voltage Regulator Heat Spreader Module for Sapphire X1950Pro AGP</strong><br />Since Sapphire X1950Pro AGP card places 2 power sockets oÂn the card and oÂne of the power socket conflicts with the Voltage Regulator Heat Spreader Module. Users can cut off a small piece of Voltage Regulator Heat Spreader away to resolve the conflict. Another method is to stick RAM heat sinks oÂn the voltage regulator for heat dissipation. </font></font></p><p><font face="Tahoma" color="#000000" size="2"><img hspace="0" src="/media/descriptions/23079-AccX2_VRHSM_Sap.jpg" align="bottom" border="0" /><br />The modded Voltage Regulator Heat Spreader Module installed oÂn Sapphire X1950Pro AGP card.</font></p><p><font face="Tahoma" size="2"><font color="#000000"><strong>Compatibility</strong><br />With this </font></font><a style="FONT-WEIGHT: normal; FONT-FAMILY: Tahoma; TEXT-ALIGN: center; TEXT-DECORATION: underline" href="http://www.arctic-cooling.com/downloads/compatibility/height_restriction_drawing_AcceleroS1_r2.pdf" target="_blank"><strong><font color="#000000" size="2">height restriction drawing</font></strong></a><font face="Tahoma" color="#000000" size="2"> you can check your VGA board for compatibility with our cooler.<br />First you have to check the position of the mounting holes. Then check the height of the components.<br /><br />If some components are slightly higher than our fancasing allows, you can relatively easy cut the fan casing.<br />To do so we suggest you first to uninstall the fancasing bottom. Then cut the bottom in the area of the component that caused the conflict and reinstall the bottom again.</font></p></li></td></tr></tbody></table></td></tr></tbody></table></td></tr></tbody></table></td></tr></tbody></table></div><p> </p></td></tr></tbody></table>Arctic15https://www.performance-pcs.com/media/catalog/product/t/m/tmpaccs1r2_03.jpg20.9500add-to-cartlow-stockArcticVGA HeatsinkOlder AMD Versions
.
Low Stock 1 left
Download PDF 
