Accelero L2 Plus is a cross compatible VGA cooler designed for low end
to mid-range graphic cards, same as his predecessor L2 Pro but with a
wider compatibility and enhanced RAM and VR cooling. A comprehensive
RAM/VR cooling set is also included to improve the cooling performance
| || || |
| || |
Featuring a 92 mm PWM fan and a cooling capacity of 120 Watts, the Accelero L2 Plus ensures components are performing under ideal temperature. The pre-applied MX-4 thermal compound allows enhanced thermal conductivity from the GPU, thus considerably extending its service life.
Enhanced RAM and VR Cooling
In order to boost the cooling efficiency of RAM and VR, the Accelero L2 Plus comes with the G-1,
an electrically non-conductive thermal glue used to affix RAM and VR
heatsinks on the VGA board. Unlike generic thermal tapes, the G-1 offers high thermal conductivity with excellent adhesiveness. Moreover, removing the G-1 is extremely easy without leaving any residues.
| || |
Operated by a low noise impeller enclosed in a patented fan holder to reduce the buzzing sound when the fan is spinning, the Accelero L2 Plus
is barely audible even running at full load. To enable minimum noise
level at all circumstances, the PWM controller enables the fan to run at
the optimal speed according to the load generated by the GPU.
To accommodate a broad range of models, the Accelero L2 Plus
comes with a versatile mounting mechanism and an extensive RAM and VR
cooling set consisting of 16 pieces of RAM/VR heatsinks in various
sizes. Featuring the CrossFire and SLI compatibility the users benefit
from the optimized performance of a multi-VGA setup.
compatibility list is based on AMD Radeon and NVIDIA's reference board
layout only. ARCTIC holds no responsibility for incompatibility on non
reference boards. Please check the height restriction drawing before purchase. |