The new generation of cooling controller from Alphacool: The Heatmaster II. The new Alphacool Heatmaster II was developed in Germany over multiple years, and has continuously been improved considering the experiences from the first version. Hence we are now, after a development and testing period of almost 3 years, able to present the best Heatmaster of all times!
The new generation of cooling controller from Alphacool: The Heatmaster II
The new Alphacool Heatmaster II was developed in Germany over multiple years, and has continuously been improved considering the experiences from the first version. Hence we are now, after a development and testing period of almost 3 years, able to present the best Heatmaster of all times!
The whole manufacturing process is done in Germany, ensuring highest quality of manufacturing and stringent quality control.
AlphacoolÂ’s Heatmaster 2 board is more than just a simple control and monitoring unit. It is the central component for a multitude of optional expansions and possibilities, some of which are already available and many are currently being developed! With this controller module you are making a step towards the future!
NOTE:This controller can handle 30w per channel! This means the unit can control all laing pumps DDC1 and + and the D5 on each channel!
Power supply: The unit draws power via the proven and reliable 4-Pin Molex power connection to the computerÂ’s PSU. Simply connect a 4-Pin PSU connector the board and the unit can be started up!
Data transfer: The data transfer from and to the Heatmaster respectively the corresponding software is achieved via an internal USB connection cable. It is extremely important to ensure the right polarity of this connection to prevent damage to your hardware or Heatmaster. More information is provided in the Operating manual on page 10.
Fan channels: 6 individual channels allow connection, control and monitoring of a large number of fans. Each channel can put out up to 10W of power, hence even allowing multiple fans to be connected (depending on the fan type).
Pumps / flow rate sensors: 3 additional channels allow connection of multiple fans or also flow rate sensors. The sensor can be monitored with the Heatmaster II. Control of the pumps is also possible by connecting the optionally available analogue adaptor (not included) parallel to a fan channel. In this configuration the 10W limit must still be observed. By adaptation it is possible to connect a wide array of pumps and flow rate sensors.
Pumps and flow rate sensors known to be compatible:
Pumps
• EK-DCP 2,2 /4,0
• Laing DDC-1T / Laing DDC-1T Plus ( requires active cooling) (as well as the RT models)
• Phobya DC12-220/260/400
Please note that the Alphacool pump adaptor may be needed for some models! Flow rate sensors
Declaration of compliance: Declaration of compliance with CE regulations: The product has been developed and tested following the harmonized European standards EN 55014-1 and EN 61000-6-3. The product fulfills all requirements of the EG directive 2004/108/EG on electromagnetic compatibility and hence carries the CE label.
RoHS: All part and components of the Heatmaster II conform with RoHS regulations WEEE / ElektroG
https://www.performance-pcs.com/alphacool-heatmaster-ii-ac-26153.html8826Alphacool Heatmaster IIhttps://www.performance-pcs.com/media/catalog/product/t/m/tmp70189_01.jpeg39.9582.7500USDInStock/Water Cooling/Accessories-Misc<p>The new generation of cooling controller from Alphacool: The Heatmaster II. The new Alphacool Heatmaster II was developed in Germany over multiple years, and has continuously been improved considering the experiences from the first version. Hence we are now, after a development and testing period of almost 3 years, able to present the best Heatmaster of all times!</p> <div style="font-size: 14px; font-family: tahoma,arial,helvetica,sans-serif;">
<p><span style="font-size: small;" size="2">The new generation of cooling controller from Alphacool: The Heatmaster II</span></p>
<p><span style="font-size: small;" size="2">The new Alphacool Heatmaster II was developed in Germany over multiple years, and has continuously been improved considering the experiences from the first version. Hence we are now, after a development and testing period of almost 3 years, able to present the best Heatmaster of all times!</span></p>
<p><span style="font-size: small;" size="2">The whole manufacturing process is done in Germany, ensuring highest quality of manufacturing and stringent quality control.</span></p>
<p><span style="font-size: small;" size="2">AlphacoolÂ’s Heatmaster 2 board is more than just a simple control and monitoring unit. It is the central component for a multitude of optional expansions and possibilities, some of which are already available and many are currently being developed! With this controller module you are making a step towards the future!</span></p>
<p class="MsoNormal"><span style="font-size: small;" size="2"><span style="font-weight: bold;">NOTE:</span></span> <span style="font-size: small;" size="2">This controller can handle 30w per channel! This means the unit can control all laing pumps DDC1 and + and the D5 on each channel! </span></p>
<p><span style="font-size: small;" size="2"><strong>Power supply:</strong></span> <span style="font-size: small;" size="2"><br /> The unit draws power via the proven and reliable 4-Pin Molex power connection to the computerÂ’s PSU. Simply connect a 4-Pin PSU connector the board and the unit can be started up!</span></p>
<p><span style="font-size: small;" size="2"><strong>Data transfer: <br /> </strong>The data transfer from and to the Heatmaster respectively the corresponding software is achieved via an internal USB connection cable. It is extremely important to ensure the right polarity of this connection to prevent damage to your hardware or Heatmaster. More information is provided in the Operating manual on page 10.</span></p>
<p><span style="font-size: small;" size="2"><strong>Fan channels:</strong></span> <span style="font-size: small;" size="2"><br /> 6 individual channels allow connection, control and monitoring of a large number of fans. Each channel can put out up to 10W of power, hence even allowing multiple fans to be connected (depending on the fan type).</span></p>
<p><span style="font-size: small;" size="2"><strong>Pumps / flow rate sensors:</strong><br /> 3 additional channels allow connection of multiple fans or also flow rate sensors. The sensor can be monitored with the Heatmaster II. Control of the pumps is also possible by connecting the optionally available analogue adaptor (not included) parallel to a fan channel. In this configuration the 10W limit must still be observed. By adaptation it is possible to connect a wide array of pumps and flow rate sensors.</span></p>
<p><span style="font-size: small;" size="2"><strong>Pumps and flow rate sensors known to be compatible:</strong></span></p>
<p><span style="font-size: small;" size="2">Pumps<br /></span></p>
<ul>
<li><span style="font-size: small;" size="2"> • EK-DCP 2,2 /4,0</span></li>
<li><span style="font-size: small;" size="2"> • Laing DDC-1T / Laing DDC-1T Plus ( requires active cooling) (as well as the RT models)</span></li>
<li><span style="font-size: small;" size="2"> • Phobya DC12-220/260/400</span></li>
</ul>
<p><span style="font-size: small;" size="2"> Please note that the Alphacool pump adaptor may be needed for some models!<br /> Flow rate sensors<br /></span></p>
<ul>
<li><span style="font-size: small;" size="2"> • Bach DFS 1/25io</span></li>
<li><span style="font-size: small;" size="2"> • Some Digmesa DF sensors</span></li>
<li><span style="font-size: small;" size="2"> • GMR DF Sensor including electronics</span></li>
<li><span style="font-size: small;" size="2"> • Innovatek FlowMeter</span></li>
</ul>
</div>Alphacool00https://www.performance-pcs.com/media/catalog/product/t/m/tmp70189_02.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmp70189_03.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmp70189_04.jpg44.9900add-to-cartAlphacoolController4250197261531<p><span style="font-size: small;" size="2"><strong>Additional features, connectable via connection array / pin strip:</strong></span></p>
<ul>
<li><span style="font-size: small;" size="2">• HM BUS</span></li>
<li><span style="font-size: small;" size="2"> • Emergency shutdown</span></li>
<li><span style="font-size: small;" size="2"> • PC shutdown</span></li>
<li><span style="font-size: small;" size="2"> • Up to 6 temperature sensors can be connected, resistance 5k Ohm or 10k Ohm</span></li>
<li><span style="font-size: small;" size="2"> • Water level sensor compatibility</span></li>
<li><span style="font-size: small;" size="2"> • LED 1: Silent alarm</span></li>
<li><span style="font-size: small;" size="2"> • LED 2: Alarm</span></li>
<li><span style="font-size: small;" size="2"> • LED 3: Warning</span></li>
<li><span style="font-size: small;" size="2"> • Up to 3 relays can be connected, switching current up to 80mA max</span></li>
<li><span style="font-size: small;" size="2"> • Up to three buttons can be connected</span></li>
<li><span style="font-size: small;" size="2"> • Heatmaster Reset</span></li>
<li><span style="font-size: small;" size="2"> • 5V Stan-by operation</span></li>
<li><span style="font-size: small;" size="2"> • 12V and 5V sockets for external devices</span></li>
</ul>
<p><span style="font-size: small;" size="2">More information about the individual features ist listed in the operating manual on pages 7ff</span></p>
<p><span style="font-size: small;" size="2"><strong>Software:</strong><br /> The centerpiece for monitoring and setup of the Heatmaster II is the software. Here a list of some oft he features:</span></p>
<ul>
<li><span style="font-size: small;" size="2">• Different presets can be opened at any time </span></li>
<li><span style="font-size: small;" size="2"> • Fan control in multiple modes</span></li>
<li><span style="font-size: small;" size="2"> • Actions triggered by temperature of flow rates</span></li>
<li><span style="font-size: small;" size="2"> • Display configuration</span></li>
<li><span style="font-size: small;" size="2"> • Alarm settings, e.g. in case of low coolant level</span></li>
<li><span style="font-size: small;" size="2"> • Monitoring of relative values, e.g. water to air</span></li>
<li><span style="font-size: small;" size="2"> • Automatic relay control and programs</span></li>
</ul>
<p><span style="font-size: small;" size="2">Details in the operating manual on pages 18ff!</span></p>
<p><span style="font-size: small;" size="2"><strong>Minimum system requirements:</strong></span></p>
<p><span style="font-size: small;" size="2">CPU: 500 MHz or better, recommended 1000 MHz<br /> RAM 512 MB<br /> 50 - 100 MB HDD space<br /> USB 1.1</span></p>
<p><span style="font-size: small;" size="2">Windows XP Service Pack 3, Windows Vista, Windows 7.<br /> Windows 98 SE, Windows 2000 Service Pack 4 with limitations.</span></p><ul>
<li><span style="font-size: small;" size="2">Dimensions: 144 x 108 x 20mm</span></li>
<li><span style="font-size: small;" size="2"> Weight:approx. 202g</span></li>
<li><span style="font-size: small;" size="2"> Current draw: max. 5A</span></li>
<li><span style="font-size: small;" size="2"> Power connector: 4 Pin Molex</span></li>
<li><span style="font-size: small;" size="2"> Fan channel power output: 10W max. per channel.</span></li>
<li><span style="font-size: small;" size="2"> Total power output: max. 60W total</span></li>
<li><span style="font-size: small;" size="2"> Relay channel power output: max. 5W per relay</span></li>
<li><span style="font-size: small;" size="2"> Fan channels: 6</span></li>
<li><span style="font-size: small;" size="2"> Fan connectors: 3 Pin</span></li>
<li><span style="font-size: small;" size="2"> Pump/ flow rate sensor channels: 3</span></li>
</ul>
<p><span style="font-size: small;" size="2"><strong>Declaration of compliance:</strong><br /> Declaration of compliance with CE regulations:<br /> The product has been developed and tested following the harmonized European standards EN 55014-1 and EN 61000-6-3. The product fulfills all requirements of the EG directive 2004/108/EG on electromagnetic compatibility and hence carries the CE label.</span></p>
<p><span style="font-size: small;" size="2"><strong>RoHS:</strong><br /> All part and components of the Heatmaster II conform with RoHS regulations<br /> WEEE / ElektroG</span></p>
<p><span style="font-size: small;" size="2"><strong>Extent of delivery:</strong><br /></span></p>
<ul>
<li><span style="font-size: small;" size="2"> 1x Alphacool Heatmaster 2</span></li>
<li><span style="font-size: small;" size="2"> 4x Temperature sensors with approx.. 50cm cable</span></li>
<li><span style="font-size: small;" size="2"> 1x internal 4-Pin USB connection cable</span></li>
<li><span style="font-size: small;" size="2"> 1x Jumper</span></li>
<li><span style="font-size: small;" size="2"> 1x Mounting material</span></li>
<li><span style="font-size: small;" size="2"> 1x Quick guide (GER, EN, FR)</span></li>
</ul>
Good Stock 13 left
Download PDF 
