APC P4V 4-Outlets Surge Suppressor Receptacles: 4 x AC Power Lightning, power surges, or changes in voltage can permanently ruin your electronic equipment, cause lockups, and cause loss of work. The SurgeArrest will protect your equipment from the threat of power fluctuations. This unit offers protection at a great value for home equipment and business applications such as small office / home computers.
APC P4V 4-Outlets Surge Suppressor Receptacles: 4 x AC Power Lightning, power surges, or changes in voltage can permanently ruin your electronic equipment, cause lockups, and cause loss of work. The SurgeArrest will protect your equipment from the threat of power fluctuations. This unit offers protection at a great value for home equipment and business applications such as small office / home computers.
Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APCÂ’s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.
Protection Working Indicator
SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.
Transformer Block Spacing
Connect bulky transformer block plugs without covering up other outlets.
Noise Filtering
Surge Protector attenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.
Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.
IEEE let-through rating and UL 1449 compliance
The 'Institute of Electrical and Electronics Engineers' (IEEE) Let-Through Voltage rating is based on a test that subjects a Surge Protector to a 6,000 volt spike. The rating equates to the amount of excess voltage that reaches connected equipment. The lower the number, the better the performance of the Surge Protector is. Underwriter's Laboratory's UL1449 surge protection safety standard uses these ratings to help users gauge performance. UL's best Transient Voltage Surge Suppressor (TVSS) Let-Through Voltage rating is "300V".
Surge Protection
Â
AV Surge Protectors Features & Benefits:
Convenience
Phone Line Splitter
Allows use of two pieces of equipment at once, such as a modem and phone.
180 degree Rotating Cord Retainer
A 180-degree rotating cord with strain relief offers flexibility in positioning the SurgeArrest, and in routing the power cord.
Adjustable Cable Management
Keeps cords and cables neat and organized.
Always on Outlets
8 outlet models offer dedicated space to accommodate wide transformer blocks without covering adjoining outlets and 2 always on outlets. You can plug 8 power cords including 3 transformers at the same time. In case you have equipment that has to stay on all the time, such as fax machine, you can plug it in always on outlets. The equipment will be protected and will have power supply even when the unit is switched off.
Transformer Block Spacing
Connect bulky transformer block plugs without covering up other outlets.
Safety
Building Wiring Fault Indicator
Immediately warns you of wiring problems like improper grounds that could cause shocks or prevent adequately suppressing surges.
Catastrophic Event Protection
SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.
Fail Safe Mode
Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APCÂ’s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.
IEEE let-through rating and UL 1449 compliance
The 'Institute of Electrical and Electronics Engineers' (IEEE) Let-Through Voltage rating is based on a test that subjects a Surge Protector to a 6,000 volt spike. The rating equates to the amount of excess voltage that reaches connected equipment. The lower the number, the better the performance of the Surge Protector is. Underwriter's Laboratory's UL1449 surge protection safety standard uses these ratings to help users gauge performance. UL's best Transient Voltage Surge Suppressor (TVSS) Let-Through Voltage rating is "300V".
Protection
Noise Filtering
Surge Protector attenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.
https://www.performance-pcs.com/apc-p4v-audio-video-surge-protector-4-outlet-with-coax-protection-120v-p4v.html5406APC P4V Audio/Video Surge Protector 4 Outlet with Coax Protection, 120V https://www.performance-pcs.com/media/catalog/product/t/m/tmpapc-p4v_01.jpg27.527.5000USDInStock/Peripherals/Power Accessories<p><span style="font-family: Tahoma; font-size: small;"><strong>APC P4V 4-Outlets Surge Suppressor</strong> <br /> Receptacles: 4 x AC Power<br /> Lightning, power surges, or changes in voltage can permanently ruin your electronic equipment, cause lockups, and cause loss of work. The SurgeArrest will protect your equipment from the threat of power fluctuations. This unit offers protection at a great value for home equipment and business applications such as small office / home computers.</span></p>
<p>Â </p> <h3><span style="font-family: Tahoma;">Product Details:</span></h3>
<p><span style="font-family: Tahoma; font-size: small;"><strong>APC P4V 4-Outlets Surge Suppressor</strong> <br /> Receptacles: 4 x AC Power<br /> Lightning, power surges, or changes in voltage can permanently ruin your electronic equipment, cause lockups, and cause loss of work. The SurgeArrest will protect your equipment from the threat of power fluctuations. This unit offers protection at a great value for home equipment and business applications such as small office / home computers.</span></p>
<p>Â </p>0021.1500add-to-cartlow-stockElectrical<p><strong>Features:</strong></p>
<div class="sectionContainer">
<div class="sectionBorder">
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="featureColumnValue">Fail Safe Mode</div>
<div class="benefitColumnValue">Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APCÂ’s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="featureColumnValue">Protection Working Indicator</div>
<div class="benefitColumnValue">SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="featureColumnValue">Transformer Block Spacing</div>
<div class="benefitColumnValue">Connect bulky transformer block plugs without covering up other outlets.</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="featureColumnValue">Noise Filtering</div>
<div class="benefitColumnValue">Surge Protector attenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="featureColumnValue">Building Wiring Fault Indicator</div>
<div class="benefitColumnValue">This LED informs users of potentially dangerous wiring problems in the wall circuit.</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="featureColumnValue">IEEE let-through rating and UL 1449 compliance</div>
<div class="benefitColumnValue">The 'Institute of Electrical and Electronics Engineers' (IEEE) Let-Through Voltage rating is based on a test that subjects a Surge Protector to a 6,000 volt spike. The rating equates to the amount of excess voltage that reaches connected equipment. The lower the number, the better the performance of the Surge Protector is. Underwriter's Laboratory's UL1449 surge protection safety standard uses these ratings to help users gauge performance. UL's best Transient Voltage Surge Suppressor (TVSS) Let-Through Voltage rating is "300V".</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="featureColumnValue">Surge Protection</div>
<div class="featureColumnValue">Â </div>
<div class="featureColumnValue">
<div class="sectionTitlePadding">
<h3>AV Surge Protectors Features & Benefits:</h3>
</div>
<div class="sectionContainer">
<div class="sectionBorder">
<div class="sectionContainer">
<div class="familysectionBorder">
<div class="lineitemContainer">
<div class="familyBlueHeader"><strong>Convenience </strong></div>
</div>
</div>
</div>
<div class="sectionContainer">
<div class="familysectionBorder">
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="featureColumnValue">Phone Line Splitter</div>
<div class="benefitColumnValue">Allows use of two pieces of equipment at once, such as a modem and phone.</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="featureColumnValue">180 degree Rotating Cord Retainer</div>
<div class="benefitColumnValue">A 180-degree rotating cord with strain relief offers flexibility in positioning the SurgeArrest, and in routing the power cord.</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="featureColumnValue">Adjustable Cable Management</div>
<div class="benefitColumnValue">Keeps cords and cables neat and organized.</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="featureColumnValue">Always on Outlets</div>
<div class="benefitColumnValue">8 outlet models offer dedicated space to accommodate wide transformer blocks without covering adjoining outlets and 2 always on outlets. You can plug 8 power cords including 3 transformers at the same time. In case you have equipment that has to stay on all the time, such as fax machine, you can plug it in always on outlets. The equipment will be protected and will have power supply even when the unit is switched off.</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="featureColumnValue">Transformer Block Spacing</div>
<div class="benefitColumnValue">Connect bulky transformer block plugs without covering up other outlets.</div>
</div>
</div>
</div>
</div>
<div class="sectionContainer">
<div class="familysectionBorder">
<div class="lineitemContainer">
<div class="familyBlueHeader"><strong>Safety </strong></div>
</div>
</div>
</div>
<div class="sectionContainer">
<div class="familysectionBorder">
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="featureColumnValue">Building Wiring Fault Indicator</div>
<div class="benefitColumnValue">Immediately warns you of wiring problems like improper grounds that could cause shocks or prevent adequately suppressing surges.</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="featureColumnValue">Catastrophic Event Protection</div>
<div class="benefitColumnValue">SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="featureColumnValue">Fail Safe Mode</div>
<div class="benefitColumnValue">Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APCÂ’s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="featureColumnValue">IEEE let-through rating and UL 1449 compliance</div>
<div class="benefitColumnValue">The 'Institute of Electrical and Electronics Engineers' (IEEE) Let-Through Voltage rating is based on a test that subjects a Surge Protector to a 6,000 volt spike. The rating equates to the amount of excess voltage that reaches connected equipment. The lower the number, the better the performance of the Surge Protector is. Underwriter's Laboratory's UL1449 surge protection safety standard uses these ratings to help users gauge performance. UL's best Transient Voltage Surge Suppressor (TVSS) Let-Through Voltage rating is "300V".</div>
</div>
</div>
</div>
</div>
<div class="sectionContainer">
<div class="familysectionBorder">
<div class="lineitemContainer">
<div class="familyBlueHeader"><strong>Protection </strong></div>
</div>
</div>
</div>
<div class="sectionContainer">
<div class="familysectionBorder">
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="featureColumnValue">Noise Filtering</div>
<div class="benefitColumnValue">Surge Protector attenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="featureColumnValue">Receptacle Shock Safety Shutters</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div><div class="sectionTitlePadding">Â </div>
<div class="sectionContainer">Â </div>
<p><strong>Specifications:</strong></p>
<div class="sectionContainer">
<div class="sectionTitlePadding">
<h2>Output</h2>
</div>
</div>
<div class="sectionContainer">
<div class="sectionBorder">
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="lineitemRowLabel">Number of Outlets</div>
<div class="lineitemRowValue">4</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="lineitemRowLabel">Receptacle Style</div>
<div class="lineitemRowValue">NEMA 5-15R</div>
</div>
</div>
</div>
</div>
<div class="sectionContainer">
<div class="sectionTitlePadding">
<h2>Input</h2>
</div>
</div>
<div class="sectionContainer">
<div class="sectionBorder">
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="lineitemRowLabel">Nominal Input Voltage</div>
<div class="lineitemRowValue">120V</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="lineitemRowLabel">Input Frequency</div>
<div class="lineitemRowValue">50/60 Hz</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="lineitemRowLabel">Input Connections</div>
<div class="lineitemRowValue">
<table width="22%">
<tbody>
<tr>
<td valign="top" width="162">NEMA 5-15P</td>
<td><img src="/pub/media/descriptions/25952-conn_5-15P_sm.gif" width="36" height="36" name="plug_img" border="0" /></td>
</tr>
</tbody>
</table>
</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="lineitemRowLabel">Maximum Line Current per phase</div>
<div class="lineitemRowValue">15A</div>
</div>
</div>
</div>
</div>
<div class="sectionContainer">
<div class="sectionTitlePadding">
<h2>Surge Protection and Filtering</h2>
</div>
</div>
<div class="sectionContainer">
<div class="sectionBorder">
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="lineitemRowLabel">Surge energy rating</div>
<div class="lineitemRowValue">1700Â Joules</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="lineitemRowLabel">EMI/RFI Noise rejection (100 kHz to 10 MHz)</div>
<div class="lineitemRowValue">20Â dB</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="lineitemRowLabel">Data Line Protection</div>
<div class="lineitemRowValue">Cable modem / Video protection</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="lineitemRowLabel">Let Through Voltage Rating</div>
<div class="lineitemRowValue">< 330</div>
</div>
</div>
</div>
</div>
<div class="sectionContainer">
<div class="sectionTitlePadding">
<h2>Physical</h2>
</div>
</div>
<div class="sectionContainer">
<div class="sectionBorder">
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="lineitemRowLabel">Net Weight</div>
<div class="lineitemRowValue">0.36Â KG</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="lineitemRowLabel">Maximum Height</div>
<div class="lineitemRowValue">165.00Â mm</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="lineitemRowLabel">Maximum Width</div>
<div class="lineitemRowValue">114.00Â mm</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="lineitemRowLabel">Maximum Depth</div>
<div class="lineitemRowValue">57.00Â mm</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="lineitemRowLabel">Shipping Weight</div>
<div class="lineitemRowValue">0.50Â KG</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="lineitemRowLabel">Shipping Height</div>
<div class="lineitemRowValue">192.00Â mm</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="lineitemRowLabel">Shipping Width</div>
<div class="lineitemRowValue">185.00Â mm</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="lineitemRowLabel">Shipping Depth</div>
<div class="lineitemRowValue">68.00Â mm</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="lineitemRowLabel">Master Carton Units</div>
<div class="lineitemRowValue">12.00</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="lineitemRowLabel">Master Carton Dimensions (Length x Width x Height)</div>
<div class="lineitemRowValue">625 x 292 x 247Â mm</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="lineitemRowLabel">Master Carton Weight</div>
<div class="lineitemRowValue">6.36Â KG</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="lineitemRowLabel">Color</div>
<div class="lineitemRowValue">Black</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="lineitemRowLabel">Units per Pallet</div>
<div class="lineitemRowValue">576.00</div>
</div>
</div>
</div>
</div>
<div class="sectionContainer">
<div class="sectionTitlePadding">
<h2>Environmental</h2>
</div>
</div>
<div class="sectionContainer">
<div class="sectionBorder">
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="lineitemRowLabel">Operating Environment</div>
<div class="lineitemRowValue">0 - 40 °C</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="lineitemRowLabel">Operating Relative Humidity</div>
<div class="lineitemRowValue">0%</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="lineitemRowLabel">Operating Elevation</div>
<div class="lineitemRowValue">0-3000Â meters</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="lineitemRowLabel">Storage Temperature</div>
<div class="lineitemRowValue">-15 - 45 °C</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="lineitemRowLabel">Storage Relative Humidity</div>
<div class="lineitemRowValue">0%</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="lineitemRowLabel">Storage Elevation</div>
<div class="lineitemRowValue">0-15000Â meters</div>
</div>
</div>
</div>
</div>
<div class="sectionContainer">
<div class="sectionTitlePadding">
<h2>Conformance</h2>
</div>
</div>
<div class="sectionContainer">
<div class="sectionBorder">
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="lineitemRowLabel">Regulatory Approvals</div>
<div class="lineitemRowValue">cUL Recognized,UL 1449</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="lineitemRowLabel">Standard Warranty</div>
<div class="lineitemRowValue">Lifetime</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRowShaded">
<div class="lineitemRowLabel">UL 1449 TVSS Rating</div>
<div class="lineitemRowValue">330V</div>
</div>
</div>
<div class="lineitemContainer">
<div class="lineitemRow">
<div class="lineitemRowLabel">Environmental Compliance</div>
<div class="lineitemRowValue">RoHS 7b Exemption</div>
</div>
</div>
</div>
</div>
<p>Â </p>