Digital temperature sensor with outstanding accuracy over a wide temperature range. The sensor is equipped with one G1/4 inner thread and one G1/4 outer thread with o-ring seal and can be installed directly between water block/radiator and hose fitting.
Digital temperature sensor with outstanding accuracy over a wide temperature range. The sensor is equipped with one G1/4 inner thread and one G1/4 outer thread with o-ring seal and can be installed directly between water block/radiator and hose fitting. An aquaero 5 or aquaero 6 device with firmware version 2100 or newer is required to use this sensor, the sensor has to be connected to the aquabus connector of the aquaero. The aquaero supports a single Calitemp sensor without further hardware, alternatively a maximum of four Calitemp sensors can be connected to a single aquaero using an "aquabus X4" (product code 53258, not included in delivery).
Rated absolute accuracy of the digital sensor chip used for Calitemp: -40 °C to -20 °C: +/- 1 °C -20 °C to -5 °C: +/- 0.5 °C -5 °C to 50 °C: +/- 0.2 °C 50 °C to 100 °C: +/- 0.5 °C 100 °C to 125 °C: +/- 1 °C Sensor resolution: 0.01 °C
Technical details: Threads: G1/4 Body material: Nickel plated brass Cover material: Silicone Height when installed: 16 mm
Scope of delivery: Calitemp sensor aquabus cable
Compatible with: aquaero 5 XT/PRO/LT, firmware version 2100 or newer, aquasuite 2018-1 or newer aquaero 6 XT/PRO/LT, firmware version 2100 or newer, aquasuite 2018-1 or newer Starting with version 2017, all versions of the aquasuite require a valid license/activation. A valid license/activation for aquasuite version 2018 or newer is required for this sensor or can be bought separately with additional cost.
Temperature Sensors and Why You Need Them! Do you ever wonder why all your fans in your custom cooled rig speed up and slow down so erratically when you boot up a game or start doing some intense video editing? These rapid changes in fan speeds can be extremely annoying if you’re not wearing your headphones or headset. Many custom liquid coolers spend the money and time on their custom loop so they don’t have to listen to a PC that sounds like a F40 fighter jet taking off from their d
product
https://www.performance-pcs.com/aquacomputer-calitemp-digital-temperature-sensor-internal-external-thread-g1-4-for-aquaero-5-6-aq-53257.html22143Aquacomputer Calitemp digital temperature sensor internal/external thread G1/4 for aquaero 5/6https://www.performance-pcs.com/media/catalog/product/t/m/tmp53257.jpg20.520.5000USDInStock/Cables/Internal Power Cables<p>Digital temperature sensor with outstanding accuracy over a wide temperature range. The sensor is equipped with one G1/4 inner thread and one G1/4 outer thread with o-ring seal and can be installed directly between water block/radiator and hose fitting.</p> <p>Digital temperature sensor with outstanding accuracy over a wide temperature range. The sensor is equipped with one G1/4 inner thread and one G1/4 outer thread with o-ring seal and can be installed directly between water block/radiator and hose fitting.<br />An aquaero 5 or aquaero 6 device with firmware version 2100 or newer is required to use this sensor, the sensor has to be connected to the aquabus connector of the aquaero. The aquaero supports a single Calitemp sensor without further hardware, alternatively a maximum of four Calitemp sensors can be connected to a single aquaero using an "aquabus X4" (product code 53258, not included in delivery).</p>Aquacomputer14.3https://www.performance-pcs.com/media/catalog/product/t/m/tmp53257_2.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmp53257_3.jpg15.0800add-to-cartAquacomputerBlackTemperature Sensor4260473311904<p><span style="font-size: small;"><b>Rated absolute accuracy of the digital sensor chip used for Calitemp:</b><br />-40 °C to -20 °C: +/- 1 °C <br />-20 °C to -5 °C: +/- 0.5 °C<br /><b>-5 °C to 50 °C: +/- 0.2 °C</b><br />50 °C to 100 °C: +/- 0.5 °C<br />100 °C to 125 °C: +/- 1 °C<br />Sensor resolution: 0.01 °C<br /><br /><b>Technical details:</b><br />Threads: G1/4<br />Body material: Nickel plated brass<br />Cover material: Silicone<br />Height when installed: 16 mm<br /><br /><b>Scope of delivery:</b><br />Calitemp sensor<br />aquabus cable<br /><br /><b>Compatible with:</b><br />aquaero 5 XT/PRO/LT, firmware version 2100 or newer, aquasuite 2018-1 or newer<br />aquaero 6 XT/PRO/LT, firmware version 2100 or newer, aquasuite 2018-1 or newer<br />Starting with version 2017, all versions of the aquasuite require a valid license/activation. A valid license/activation for aquasuite version 2018 or newer is required for this sensor or can be bought separately with additional cost.</span></p>
/Cables/Internal Power Cables7758Internal Power Cableshttps://www.performance-pcs.com/cables/internal-power-cables.html13