Lian Li PC-9B Aluminum Super Mid Tower Computer PC Case - Black

Product Details:

PC-9 has special safety features such as folded edges at strategic points to prevent sharp edges hurting users. Fitting the motherboard on the top with the case, the spacious interior allows many options for modding projects and great airflow, keeping your system cool and durable.

Features:

• Classic Style, Simple and Clean cut design and shape. Using 1.5mm thick aluminum panels formed with the unique hair-line brushed anodized aluminum finishing.
• PC-9 features a door with a lock in the HDD front panel which secures the SATA Hot Swappable HDD Cage inside the case. It supports four HDDs. Users can easily switch HDD’s as needed. The SATA back panel doesn’t have any chip or micro processor on the PCB so it requires a compatible motherboard for the RAID and hot swap SATA functions.
• PC-9 features a side mounted silent 12cm ball-bearing fan which runs at 1500RPM. It cools the HDD cage from left side to right side. He hot air from the HDD cage is exhausted before it can influence other hot running components in your Chassis.

Silent Performance:

• There is a silent 12cm ball-bearing intake fan (1500RPM) which brings cold air into the chassis.
• Lian Li designers consider every detail. The PC-9 is equipped with anti-vibration clips and grommets on the chassis, to absorb the noises created by vibrating and spinning parts. The EMI spring on the top cover absorbs the vibrations, without interfering with the side panel.
• Chassis has anti-vibration grommets to support the motherboard tray. The anti-vibration spring clips on the chassis push against the side panel to reduce the chance of vibration, while enhancing the perfect fit between the removable parts.
• Huge internal space for power supply units, there are anti-vibration rubber strips to reduce the noise.
• PC-9 features a side mounted silent 12cm ball-bearing fan which runs at 1500RPM. It cools the HDD cage from left side to right side. Simply using the special thumb screw to secure the anti-vibration rubber ring to the HDD, and easy switch the fan by one screw.

Creative Thermal Solutions:

• PC-9 has a 12cm ball-bearing fan on the rear of the case which runs at 1500RPM pulling hot air from the CPU region. In addition, the intake fan, also 12cm at the same RPM brings in cold air through the HDD racks from the left of the case and exhausts the hot air out the right side vent.
• PC-9 Features a three-speed fan controller, user can adjust the fan speeds to get the best balance between silent and increased cooling. Factory setting are default at Mid Speed, but user can adjust the fan speed as needed. (Low speed:1020rpm~Mid speed:1240rpm~High speed:1500rpm)
• PC-9 supports liquid cooling system, there are two holes for water tubes, and covered with rubber cover. PC-9 supports liquid cooling system, there are two holes for water tubes, which are covered with a rubber cover.
• There is a 120mm exhaust fan at the rear of the chassis, it runs at 1500RPM (Low speed:1020rpm~Mid speed:1240rpm~High speed:1500rpm). The fan is extremely silent and can remove a good volume of air from inside the case.
• The PCI bracket with vent holes adds extra ventilation possibilities for improved airflow for optional graphics card coolers

User Friendly:

• There are special openings for cables to pass through different zones, and the openings are fitted with protective shielding to protect user's hands, and cables.
• Multi-media port connectors follow international specification standards, with one connector for easy installation. Audio supports HD Audio or AC97 Audio. The dual design is for better compatibility options. All I/O ports on the top cover, allow for easy access, there is also a dust-free cover to protect these connectors.
• There is a lock on the door in the HDD cage to protect your HDD’s. The included grill and air filter for the intake fan are easily removed and washable.
• PC-9's front panel can be easily removed, with all the switches and wires mounted in the chassis, and therefore out of the way.
• Top cover can be removed via four easy to reach screws. Ideal for modding projects.

Specifications:

FAQ:

About the SATA Hot Swappable HDD Cage
The SATA back panel doesn’t have a RAID or SATA chip on the PCB. It requires a motherboard which has RAID onboard and SATA capabilities to enable the hot swap and RAID features.