Facebook Pixel

 

Fractal Design Node 804 Micro ATX Case - Black

Fractal Design Node 804 Micro ATX Case - Black

Sliger SM550 Mini-ITX Computer Chassis

Sliger SM550 Mini-ITX Computer Chassis

Sliger SM550 Mini-ITX Computer Chassis

SKU
SL-SM550-IK

Estimated Delivery

Loading...
at ZIP
Order within

The Sliger SM550 is a Mini-ITX PC case measuring in at roughly 13.19" x 5.48" x 8.18", But don't let its size fool you this Mini Chassis is build for hard work with its ability to fit a full length GPU this fully customizable chassis is perfect for a LAN Party Rig or just for every day use.

Please Note: Cases will take up to 1 Week to be assembled and shipped.

$219.00
Pre Order

The Sliger SM550 is a Mini-ITX PC case measuring in at roughly 13.19" x 5.48" x 8.18", But don't let its size fool you this Mini Chassis is build for hard work with its ability to fit a full length GPU this fully customizable chassis is perfect for a LAN Party Rig or just for every day use.

Please Note: Cases will take up to 1 Week to be assembled and shipped.

  • Support Mini-ITX motherboards
  • Front panel with USB 3.1 Type C (SS+ 10 Gbit/s), USB 3.0 Type A, and Dual Audio Jacks
  • Compatible with air coolers up to 55mm tall, or some larger coolers with fan removed
  • Supports dual slot GPUs up to 305mm long x 155mm tall
  • Support SFX an SFX-L form factor power supplies
  • Mounts two 120mm x 25mm thick fans for high performance cooling
  • Magnetic dust filters available from Demcifilter
  • Designed and manufactured in the USA by Sliger

 

Motherboard

  • Mini-ITX (170mm × 170 mm)

CPU Liquid Coolers

  • 92mm Asetek 645LT
  • Requires 92mm AIO adapter plate

CPU Air Coolers

  • Maximum of 55mm tall CPU coolers
  • Coolers that require a Vented Side Panel on the CPU side
  • ID-COOLING IS-60 (55mm)
  • AMD Wraith Stealth (54mm)
  • Cooltek LP53 (53mm)
  • Coolers compatible with all side panel types (Unvented, Window, or Vented)
  • Alpenföhn® Black Ridge (47mm)
  • Noctua L9i/L9a
  • Intel Boxed Cooler
  • Cryorig C7 CU
  • Cryorig C7
  • Cooltek ITX30
  • Phanteks PH-TC90LS
  • RAIJINTEK Zelos
  • Silverstone AR05
  • Silverstone AR11
  • SEMI-PASSIVE MODE: requires Unvented or Window panels on both sides, and two high static pressure 120mm fans
  • be quiet! SHADOW ROCK LP (FAN REMOVED)
  • Phanteks PH-TC12LS (FAN REMOVED)
  • Noctua NH-L9x65 (FAN REMOVED)
  • REEVEN BRONTES RC-1001b (FAN REMOVED)
  • Scythe SCSK-1100 Shuriken Rev. B (FAN REMOVED)
  • SCYTHE Big Shuriken 3 CPU Cooler SCBSK-3000 (FAN REMOVED)
  • Thermalright AXP-100H Muscle (FAN REMOVED)
  • Thermalright AXP-100 Copper(FAN REMOVED)
  • Cooltek CR-701 (FAN REMOVED)

Fan Mounting

  • 2x 120mm Fans
  • Fans can be a maximum of 25mm thick
  • Recommended airflow is bottom intake, top exhaust
  • For any (FAN REMOVED) heat sinks listed above both fans must be populated with high static pressure fans
  • 2x Noctua NF-F12 (recommended)

GPU / PCIe Cards

  • Supports two(2) slot wide cards with room between side panel and card for airflow
  • Card is mounted behind motherboard on a PCIe 3.0 16x Flexible Ribbon Riser
  • with Standard Inlet
  • Maximum card height: 133mm
  • Maximum card length: 305mm
  • Maximum card width: 2 slot, up to 50mm [email support@sliger.com to verify fit]
  • with Pigtail Inlet (recommended for MSI and ZOTAC cards)
  • Maximum card height: 157mm
  • Maximum card length: 305mm
  • Maximum card width: 2 slot, up to 50mm [email support@sliger.com to verify fit]
  • 157mm of height for GPU power connectors regardless of power cord option

Storage

  • (2x) 2.5" SSD/HDD mounting points behind front panel
  • Optional (4x) 2.5" SSD/HDD mount bracket [replaces 1x 120mm bottom fan]
  • Maximum two brackets for total of 8x 2.5" SSD/HDDs
  • Optional (1x) 3.5" HDD mount bracket [replaces 1x 120mm bottom fan]
  • Maximum two brackets for (2x) 3.5" HDD in bottom of case

Power Supply

  • SFX
  • Corsair SF series (up to 750W)
  • SilverStone SST-SX series (up to 650W)
  • EVGA SuperNOVA GM series (up to 650W)
  • FSP Dagger series (up to 600W)
  • SFX-L is supported, however it is a very tight fit and not recommended.
  • Sliger recommends a fan guard grill or custom cables if you do go with SFX-L.
  • It is recommended to mount your PSU with the fan intake facing the GPU for best thermals.

Front Panel I/O

  • One USB 3.1 Gen 2 Type C to USB E header (SS+ 10 Gbit/s)
  • One USB 3.0 Type A to 20-Pin Motherboard Header
  • Two Audio Jacks to standard 9-Pin HD AUDIO header

Material

  • Chassis
  • ASTM-A-653 G30 Zero Spangle 20 Gauge Galvanized Steel
  • Side Panels
  • ASTM B209-10 5052-H32 0.080" Aluminum Sheet
  • Feet
  • Cavity Molded 75 Durometer Nonmarking Black SBR

Finish

  • Powder coated chassis and panels

Case Dimensions (LxWxH)

  • 13.19" x 5.48" x 8.18" - LxWxH
  • 335mm x 139mm x 208mm - LxWxH

Volume

  • 9.7 Liters

Weights

  • Base Chassis (includes power cord and riser)
  • 4.55lbs
  • Window Panels
  • 0.75lbs each
  • Vented Panels
  • 0.50lbs each
  • Unvented Panels
  • 0.80lbs each
  • Packaging Material
  • 1.30lbs each

Security

  • 1x Kensington Lock Cutout

Warranty

  • 2 Year Warranty

 

Write Your Own Review
You're reviewing:Sliger SM550 Mini-ITX Computer Chassis
Your Rating

Questions & Answers

Search Q/A
Sort by
Expand All +
Download PDF Download PDF
Recently Viewed
No recently views items
Clear All
Please select a wishlist