Singularity Computers Spectre Integra-MA - Silver

PowerBoard Integration:
The PowerBoard is a PCB integrating 24pin, EPS, PCIE and 12VHPWR along with PWM and ARGB Hubs, SATA and Power and Reset Buttons. The Spectre Integra M PowerBoard also has an integrated touch sensing Power Button. The PowerBoard has x24 ARGB and UV LEDs positioned around the external and internal perimeter to optimally light up the distribution plate. The LEDs can be switched on or off and you can switch between ARGB or UV or have both on at the same time. Essentially the PowerBoard is a distribution plate for cables also integrating other features and functions. It is a new method for cables allowing standardization of cable lengths and making cable management no longer necessary. Spectre Integra M comes included with a standard set of black sleeved linking cables including 24pin x1, 8pin EPS x2, 8pin PCIE x3 meaning that these cables don’t have to be purchased separately.
Reduced build time due to integration:
With the core component cables, PWM and ARGB hubs all integrated there is less assembly to be done, there is almost no cable management for the core component cables thanks to the PowerBoard integration.
Integration Cost Component:
A large portion of the case cost is due to the integration. These are components you do not have to purchase for your build. The Powerboard is a full solution for cables and ARGB and PWM hubs.
High End Components:
Spectre 3.0 Integra M-A fits ATX motherboards and has 7 expansion slots. It is designed to fit the largest high-end GPUs. It can fit the largest PSUs up to 220mm. For the water-cooling system it can fit 2x 360mm radiators 60mm thick with a single set of fans and the D5 pump. The PowerBoard can handle the most high-end PSUs and components.
Radiator Adjustment:
The radiator mounting panels have a large range of adjustment to help with port alignment to the distribution plate.
Storage:
Spectre 3.0 Integra has 7x 2.5” Drive positions. Two are on the top of the PSU shroud, four inside of the PSU shroud and there is one integrated on the PowerBoard. The two on top of the PSU shroud cannot

Electronics Integration:
Core Component Cables: 24pin x1. 8pin EPS x2. PCIE 8pin x3. 12VHPWR x2. 6pin PCIE MB Supplementary x1.
Hubs: PWM: x3. ARGB: x10 (Single input for each).
LEDs: x24 Integrated ARGB 90-degree LEDs and x24 UV 90-degree LEDs facing around the internal and external perimeter of the PowerBoard. There are two switches on the PowerBoard one switches the ARGB on or off and the other switches the UV on or off.
Touch sensing Power Button.
Extra Power and Reset Buttons.
PowerBoard LED on/off switch.
PowerBoard 2.5” SATA 3.0 6Gb/s Direct Mount x1.
Cables: PowerBoard Linking Cables Standard Set: 24pin x1. 8pin EPS x2. 8pin PCIE x3. 18AWG Black Headshrinkless Sleeve.
PWM Female to Female 50cm Black Sleeved x1.
ARGB Female to Female 50cm Black Sleeved x1.
Touch Power Button and extra Power and Reset Button Cables 20cm x4.
LED Strips: x2 50cm ARGB LED Strips with 50cm cables. (Attach to case panels on specific mounting points for front and top panel glow).
Motherboard Form Factor: ATX, Mini-DTX, Mini-ITX.
Expansion Slots: x7.
Case Form Factor: Mid Tower.
Package Dimensions: L: 640mm W: 620mm H: 110mm (Case is flat packed and requires partial assembly).
Package Weight: 12kg.
Case Dimensions: L: 486mm H: 528mm W: 245mm.
Case Weight: 10kg.
Storage: 7x 2.5”. x2 are on top of the PSU shroud and cannot be used when the GPUs are vertically mounted. x4 are inside of the PSU Shroud. x1 is on the PowerBoard behind the PSU.
Radiators: 360mm x 60mm front, 360mm x 40mm top, each with x1 set of standard 25mm fans.
Maximum GPU Length: 410mm with radiator installed.
Maximum GPU Height: 170mm in standard orientation. Unlimited in vertical orientation.
Maximum CPU Cooler Height: 170mm.
Maximum PSU Length: 220mm (Space allowed for cables inside of PSU shroud).
Front Panel I/O: No Front I/O. Vandal Switch 16mm white LED.
Vertical GPU Mount: x2 with 3 slot (60mm) spacing. x1 is included. 2^nd Vertical GPU Mount Available Separately Here. Riser cable not included, compatible with Linkup PCIE 4.0 Riser Cables.
Materials: 6061 Aluminum Anodized. Cast Acrylic. Stainless Steel. PCB.
Manufacturing Process: CNC Mill, CNC Lathe, CNC Router, PCB.
Assembly: Acrylic backplate with PowerBoard assembled by hand. Metal Components need to be assembled and attached to the Acrylic backplate by the customer.

Case Components:
Acrylic backplate with PowerBoard: x1
Clear Cast Acrylic Side Panel Window: x1.
Case Panel Set: x16 pieces.
LED Diffusors x2.
Top corner acrylic cover with logo.
Vertical GPU Mount: x1. (Includes Vertical GPU Bracket and Angle Mount).

Cables:
PowerBoard Linking Cables Standard Set: 24pin x1. 8pin EPS x2. 8pin PCIE x3. 18AWG Black Headshrinkless Sleeve.
PWM Female to Female 50cm Black Sleeved x1.
ARGB Female to Female 50cm Black Sleeved x1.
Touch Power Button and extra Power and Reset Button Cables 20cm x4.

Accessories:
Hex Keys: M3: x1. M4: x1. M6: x1.
Microfiber Cloth: x1.
Stop Fittings: x2.
5v ARGB LED Strip 50cm: x2.