Facebook Pixel

 

Motherboard 2.54mm Standard Jumper w/ Easy Pull Tab

Motherboard 2.54mm Standard Jumper w/ Easy Pull Tab

PPCS Premium Heatsink Lapping Kit Refill

PPCS Premium Heatsink Lapping Kit Refill

PPCS Premium Heatsink Lapping Kit

SKU
LAPKIT-PREM

Despite stringent manufacturing processes used by most CPU cooler manufacturers, heatsink bases are usually not without minor defects. The goal of most manufacturer's is to provide a smooth and flat surface for maximum contact between the heatsink and the processor. Small grooves, uneven surfaces from sanding and grinding are usually left over from the manufacturing process. Most heatsinks are also left with a fairly rough surface because it is simply too expensive to properly lap the surface of the base to perfection.

$11.50
Out of stock No Stock
More Information on Shipping

Despite stringent manufacturing processes used by most CPU cooler manufacturers, heatsink bases are usually not without minor defects. The goal of most manufacturer's is to provide a smooth and flat surface for maximum contact between the heatsink and the processor. Small grooves, uneven surfaces from sanding and grinding are usually left over from the manufacturing process. Most heatsinks are also left with a fairly rough surface because it is simply too expensive to properly lap the surface of the base to perfection.

How does this kit work?
Our heatsink lapping kit will remove fine grooves and scratches and help level uneven surfaces. We include 24 sheets of high quality 2.75" x 4.5" wet or dry silicon carbide sandpaper ranging from 220 grit to 2500 grit roughness. Start off with the 220 grit sandpaper to even out the surface and remove deep grooves and scratches. Working your way slowing up to 2500 grit will provide an ultra smooth and flat surface that will greatly increase any heatsinks performance!

*Note: Performance-PCs.com is not responsible for any damages or harm caused by the improper use of this kit.

Includes:
Performance-PCs.com's Premium Heatsink Lapping kit includes 24 sheets of precut sandpaper along with a flat and sturdy lapping surface provide and flat and even finish every single time.

Twenty-four (24) 2.75” x 4.5” sheets of wet-or-dry sandpaper
    - 4 sheets of 120 grit
    - 4 sheets of 220 grit
    - 4 sheets of 400 grit
    - 4 sheets of 1200 grit
    - 4 sheets of 2000 grit
    - 4 sheets of 2500 grit

One (1) 3" x 4" lapping surface

Click here to see our heatsink lapping guide.

Write Your Own Review
You're reviewing:PPCS Premium Heatsink Lapping Kit
Your Rating

Questions & Answers

Search Q/A
Sort by
Expand All +
Download PDF Download PDF
Recently Viewed
No recently views items
Clear All
Please select a wishlist