Dual Color Blue/White LEDs - 5MM
Blue and White Color in 1 LED! Superior quality LED's for the DIY modder. These are ultra bright,long lasting LED's that can be used for many modding projects and to customize your rig using the colors you like. Very easy to solder and install. Add a 470 Ohm Resistor for use with 12V or a 100 Ohm resistor for use with 5V sources. This LED has 3 leads, one cathode (+) each for the white and blue LED filament and then a common anode (-)
No StockBlue and White Color in 1 LED! Superior quality LED's for the DIY modder. These are ultra bright,long lasting LED's that can be used for many modding projects and to customize your rig using the colors you like. Very easy to solder and install. Add a 470 Ohm Resistor for use with 12V or a 100 Ohm resistor for use with 5V sources. This LED has 3 leads, one cathode (+) each for the white and blue LED filament and then a common anode (-)
Price is for 1 LED
- Long lasting (over 200,000 hours, 22 years)
- Low Power Consumption - low heat output
- Waterproof
- Shockproof
- Outdoor/Indoor lighting
- I.C. Compatible
- Source Material:InGaN
- Diameter: 5mm
- Emitting color:Blue/White
- Lens Type:Water Clear
- Luminous Intensity-MCD:1200 Blue 2000 White
- Reverse Voltage: 5.0 V
- DC Forward Voltage: Blue 3.0 White 3.3V Typical
- DC Forward Current:20-30mA
- Viewing Angle:15 Degrees
- Lead Soldering Temp:260o C for 5 seconds
Questions & Answers
Download PDF SAME DAY SHIPPING
Most orders ship same day or use our Rush Service.
100% SATISFACTION
Our promise you will always be happy with your purchase.
ONLINE SUPPORT 24/7
Use Email, chat or phone for any tech or order help.
