EK-Loop Hard Tube 12mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 10/12mm (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.
EK-Loop Hard Tube 12mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 10/12mm (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.
It comes in a length of 0.8m (800mm) which can be easily cut and shortened to an adequate length for any tubing run. It is mandatory to chamfer the edges of a freshly cut tube in order to prevent gasket (O-ring) damage.
Technical data: - Material: Extruded acrylic - Inner diameter: 10 mm - Outer diameter: 12 mm - Total length: 800 mm - Bend Angle: 90° - Bend Radius: R20 - Length per axis: 550x250mm
https://www.performance-pcs.com/ek-loop-hard-tube-12mm-0-8m-pre-bent-90-acrylic-6pcs.html33812EK-Loop Hard Tube 10/12mm 0.8m Pre-Bent 90° - Acrylic (6pcs)https://www.performance-pcs.com/media/catalog/product/e/k/ek-loop-hard-tube-12mm-90-pb_01.jpg62.9962.9900USDInStock/Water Cooling/Water Tubing (Soft & Hard)/Rigid (Hard) Tubing<p>EK-Loop Hard Tube 12mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 10/12mm (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.</p> <p>EK-Loop Hard Tube 12mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 10/12mm (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.</p>
<p><img src="{{media url="wysiwyg/product_pages/EK-LOOP-HARD-TUBE-12MM-90-PB-deatails1.jpg"}}" alt="" /> </p>
<p>It comes in a length of 0.8m (800mm) which can be easily cut and shortened to an adequate length for any tubing run. It is mandatory to chamfer the edges of a freshly cut tube in order to prevent gasket (O-ring) damage.</p>
<p> <img src="{{media url="wysiwyg/product_pages/EK-LOOP-HARD-TUBE-12MM-90-PB-dettails2.jpg"}}" alt="" width="900" height="350" /> </p>
<p> </p>EK Waterblocks00https://www.performance-pcs.com/media/catalog/product/e/k/ek-loop-hard-tube-12mm-90-pb_02.jpghttps://www.performance-pcs.com/media/catalog/product/e/k/ek-loop-hard-tube-12mm-90-pb_03.jpghttps://www.performance-pcs.com/media/catalog/product/e/k/ek-loop-hard-tube-12mm-90-pb_04.jpg44.7300add-to-cartEK WaterblocksClearAcrylic12mm3831109826041<p> </p>
<p> </p><p><strong>Technical data:</strong><br />- Material: Extruded acrylic<br />- Inner diameter: 10 mm<br />- Outer diameter: 12 mm<br />- Total length: 800 mm<br />- Bend Angle: 90°<br />- Bend Radius: R20<br />- Length per axis: 550x250mm</p>
<p> <img src="{{media url="wysiwyg/product_pages/EK-LOOP-HARD-TUBE-12MM-90-PB_details3.png"}}" alt="" /></p>