The EK-Vector RTX RE high-performance water block is an evolution of the original EK-Vector water block specially designed for multiple reference NVIDIA® GeForce® RTX Turing based graphics cards. The cooling engine is tweaked for even more performance with an optimized flow pattern. It also offers extended compatibility fitting more reference design based graphics cards.
The EK-Vector RTX RE high-performance water block is an evolution of the original EK-Vector water block specially designed for multiple reference NVIDIA® GeForce® RTX Turing based graphics cards. The cooling engine is tweaked for even more performance with an optimized flow pattern. It also offers extended compatibility fitting more reference design based graphics cards.
This water block is compatible with all reference design GeForce RTX 2080 based graphics cards, but as always, we recommend that you refer to the EK® Cooling Configurator for a precise compatibility match.
The water block directly cools the GPU, VRAM and the VRM (voltage regulation module) as cooling liquid is channeled directly over these critical areas. These newly developed water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK® Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance of these water blocks.
The EK® Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios.
The base of the block is CNC machined out of electrolytic copper while the top is CNC machined out of high-quality acrylic material. Sealing is ensured by high-quality EPDM O-Rings. The brass standoffs are already pre-installed and allow for a safe and easy installation procedure.
G1/4" threaded fittings can be used on both sides of the terminal and for multiple GPU connectivity, please refer to our offer of EK-Scalar GPU Terminals. The EK-Vector GPU water block terminal cover is not compatible with FC Terminal X and FC Terminal (Legacy) multi GPU connectivity bridges.
The NVIDIA® NVLink is compatible with this water block.
- EK-Vector RTX RE series high-performance water block - Mounting mechanism with screw-in brass standoffs - Necessary mounting screws, nuts, and washers - 2x Nickel plated brass plug G1/4” - 6mm Allen key - Thermal pads - Thermal grease EK-TIM Ectotherm (1g)
Made in Slovenia - Europe!
PLEASE NOTE:
Due to an immense variety of fittings/barbs available on the market and no prescribed standards, we guarantee compatibility only for connectors bought from our website.
NVIDIA® RTX 2080Ti Founders edition factory backplate is not compatible with this water block!
Check your toolbox if you are missing this special Hex adapter for some of the screws.
Fittings are just for showcase and are not included!
The EK-Vector GPU water block terminal cover is not compatible with FC Terminal X and FC Terminal (Legacy) multi GPU connectivity bridges.
This product should NOT be installed with any aluminum Fluid Gaming parts!
https://www.performance-pcs.com/ek-vector-rtx-re-copper-plus-plexi-ek-vector-rtx-re-cp.html25671EK Vector RTX RE - Copper + Plexihttps://www.performance-pcs.com/media/catalog/product/e/k/ekint-vector_re_2080_copper_plexi_front_1.jpg70139.9900USDInStock/Water Cooling/Water Blocks/Water Blocks - VGA/Clearance/Scratch&Dent/Waterblock Clearance<p style="text-align: justify;">The EK-Vector RTX RE high-performance water block is an evolution of the original EK-Vector water block specially designed for multiple reference NVIDIA® GeForce® RTX Turing based graphics cards. The cooling engine is tweaked for even more performance with an optimized flow pattern. It also offers extended compatibility fitting more reference design based graphics cards.</p> <p style="text-align: justify;">The EK-Vector RTX RE high-performance water block is an evolution of the original EK-Vector water block specially designed for multiple reference NVIDIA® GeForce® RTX Turing based graphics cards. The cooling engine is tweaked for even more performance with an optimized flow pattern. It also offers extended compatibility fitting more reference design based graphics cards.</p>
<p style="text-align: justify;">This water block is compatible with all reference design GeForce RTX 2080 based graphics cards, but as always, we recommend that you refer to the EK<span>®</span> Cooling Configurator for a precise compatibility match. </p>
<p style="text-align: justify;">The water block directly cools the GPU, VRAM and the VRM (voltage regulation module) as cooling liquid is channeled directly over these critical areas. These newly developed water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK<span>®</span> Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance of these water blocks. </p>
<p style="text-align: justify;">The EK<span>®</span> Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios. </p>
<p style="text-align: justify;">The base of the block is CNC machined out of electrolytic copper while the top is CNC machined out of high-quality acrylic material. Sealing is ensured by high-quality EPDM O-Rings. The brass standoffs are already pre-installed and allow for a safe and easy installation procedure. </p>
<p style="text-align: justify;">G1/4" threaded fittings can be used on both sides of the terminal and for multiple GPU connectivity, please refer to our offer of EK-Scalar GPU Terminals. The EK-Vector GPU water block terminal cover is not compatible with FC Terminal X and FC Terminal (Legacy) multi GPU connectivity bridges.</p>
<p style="text-align: justify;">The NVIDIA® NVLink is compatible with this water block.</p>EK Waterblocks00https://www.performance-pcs.com/media/catalog/product/e/k/ekint-vector_re_2080_copper_plexi_back_1.jpghttps://www.performance-pcs.com/media/catalog/product/e/k/ekint-vector_re_2080_copper_plexi_front_coolant_1.jpghttps://www.performance-pcs.com/media/catalog/product/e/k/ekint-vector_re_2080_copper_plexi_front_pcb_1.jpghttps://www.performance-pcs.com/media/catalog/product/p/-/p-0204_ekint_graphical_technical_drawings_gpu_ek-vector_re_mg.v1.jpg105.7000EK WaterblocksClearNVIDIA® GeForce® RTX 2080NvidiaCopper-Plexi3831109815908<p style="text-align: justify;"><strong>Enclosed:</strong></p>
<p style="text-align: justify;">- EK-Vector RTX RE series high-performance water block<br />- Mounting mechanism with screw-in brass standoffs<br />- Necessary mounting screws, nuts, and washers<br />- 2x Nickel plated brass plug G1/4”<br />- 6mm Allen key<br />- Thermal pads<br />- Thermal grease EK-TIM Ectotherm (1g)</p>
<p style="text-align: justify;"><strong>Made in Slovenia - Europe!</strong></p>
<div class="ow_alert_box">
<p class="ow_al_txt ow_alert_text"><strong>PLEASE NOTE:</strong></p>
<span class="ow_alert_icon"></span>
<div class="ow_alert_content">
<ul>
<li><strong>Due to an immense variety of fittings/barbs available on the market and no prescribed standards, we guarantee compatibility only for connectors bought from our website.</strong></li>
<li><strong>NVIDIA® RTX 2080Ti Founders edition factory backplate is not compatible with this water block!</strong></li>
<li><strong>Check your toolbox if you are missing this special Hex adapter for some of the screws.</strong></li>
<li><strong>Fittings are just for showcase and are not included!</strong></li>
<li><strong><span>The EK-Vector GPU water block terminal cover is not compatible with </span>FC Terminal X<span> and </span>FC Terminal (Legacy)<span> multi GPU connectivity bridges.</span></strong></li>
<li><strong>This product should <span>NOT</span> be installed with any aluminum <span>Fluid Gaming</span> parts!</strong></li>
</ul>
</div>
</div>
<h2>Additional Info</h2>
<table class="data-table" id="product-attribute-specs-table" border="1"><colgroup><col width="25%" /> <col /> </colgroup>
<tbody>
<tr class="first odd"><th class="label">Material / Design / Color option</th>
<td class="data last">Copper Plexi</td>
</tr>
<tr class="even"><th class="label">Threads</th>
<td class="data last">G1/4</td>
</tr>
<tr class="last odd"><th class="label">Chip Manufacturer</th>
<td class="data last">Nvidia GeForce</td>
</tr>
</tbody>
</table>
Good Stock 6 left
Download PDF 
