Quiet: At less than 22dB even most fans in the system are louder. For decoupling are two different versions of kits included. First, a mat for simple, but very practical mounting on the case bottom. This mat is provided on both sides with adhesive, so that the pump does not slip. The second possibility is to mount the pump with 2 brackets with which this can be hung. A centrifugal bearing promises quiet ceramic base and long durability.
Compact: With its compact dimensions (see technical specifications) fits comfortably into any corner, even at medium and mini towers. The small size is needed for the manifold no regard for the pump to take, this fits virtually anywhere!
Powerful: always compromises in performance have been made in the past With such a small and quiet pump. But not here! 4m head at 800L / h flow rate is a power that is not constrained by systems with multiple waterblocks in the knee.
1/4 inch connection: No adapters, no annoyingly long connectors any more! Simply just screw in the desired connector and you're done!
12V Connection: The great advantage of the 12V connector is that you have a 230V cable to the pump to operate internally. The second advantage lies in the shape of the selected port: Not a 4-Pin Molex connector, but via a 4-Pin PWM connector, fan connector, this pump can be operated. Here, (Attention: Observe requirements of the slots!) The pump eg be operated and controlled by the motherboard or a fan controller. The power can be turned down even further, making the pump even more silent and smooth running. Only 8V required to run at all, the pump will start. In addition, can be read at the pump, the tacho signal.
