Facebook Pixel

 

Bitspower Touchaqua NOTOS O 120 PWM Fan Digital RGB (5PCS)

Bitspower Touchaqua NOTOS O 120 PWM Fan Digital RGB (5PCS)

 Bitspower NOTOS O 120 PWM Fan Digital RGB (3PCS)

Bitspower NOTOS O 120 PWM Fan Digital RGB (3PCS)

Bitspower NOTOS O 120 PWM Fan Digital RGB (3PCS)

SKU
BPTA-NTO1218D3
Rating:
100% of 100

Bitspower NOTOS O 120 PWM Fan Digital RGB (3PCS)

The Notos O 120 DRGB Fan has been uniquely designed by Bitspower in order to provide the most efficient cooling at a fantastic price. With a maximum speed rate of 1800RPM, which can be adjusted via the supported PWM, the 120x120x25mm fan is well suited to be paired with our radiators for efficient cooling. Equipped with vibration cancelation rubber pads on all four corners, rattling noises will be a thing of the pasty while you game, stream, watch a movie or work.

$47.95
In stock Low Stock 3 left
More Information on Shipping

Bitspower NOTOS O 120 PWM Fan Digital RGB (3PCS)

 

The Notos O 120 DRGB Fan has been uniquely designed by Bitspower in order to provide the most efficient cooling at a fantastic price. With a maximum speed rate of 1800RPM, which can be adjusted via the supported PWM, the 120x120x25mm fan is well suited to be paired with our radiators for efficient cooling. Equipped with vibration cancelation rubber pads on all four corners, rattling noises will be a thing of the pasty while you game, stream, watch a movie or work.

RGB enthusiasts will be pleased to know that the Notos O 120 DRGB Fan features digital RGB LEDs around the center axel and the fan frame, providing stunning lighting effects. In addition to being able to "daisy chain" the RGB interface of your fans, Bitspower has also had the product certified by ASUS AURA Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome, and Razer Chroma to ensure fully synchronized lighting of your system.

 

Features:

Bitspower PWM FAN Multi Function HUB
https://shop.bitspower.com/index.php?route=product/product&product_id=7042&search=BP-PFANMFH


1.Support 10 Fans with PWM Function.
2.Direct control from BIOS or Motherboard software,when hub linked to Motherboard.
3.Power supply from SATA Connected.
4.LED Light for Power On.
5.Separate Capacitor to provide more stable current for PWM Fans.
6.Easy to Install in Chassis.


Input Voltage : 12V
Operating Temperature : <70ºC
Input : SATA Connected
Connection Socket : Small Four Pin

Pressing A+C simultaneously will turn on the auto cycling mode.
Pressing A again will stop the cycling mode and set the lighting to a specific color. 

If there aren’t enough DRGB headers on the motherboard, you can use the "Bitspower Digital RGB Multi Function Controller", which is available for purchase via the link below:
https://shop.bitspower.com/index.php?route=product/product&product_id=7822

I wanna show off, but what's the support I'd need?

â—†DRGB

The end of power supply is 3PIN. The sequence is +/D/↓ (some motherboards are shown +5V/D/↓, and the plug is like 4PIN but the 3rd PIN is empty). Please plug in the corresponding direction of motherboard, controller or the wire integrator for one to many. If choosing the motherboard as the power supply, the light effect can be synchronize with MB.

image

 

Specifications:

Rated Voltage: Fan DC12V /LED DC 5V
Operation Voltage: 7V-13.2V
Staring Voltage: ≤7V
Fan Speed: 800~1800 RPM±10%
Noise Level: 25~28dBA(Max)
Life time: 30000 Hours
No.of Blades: 7 leaves
Color : Black
Input Voltage : 12V
Operating Temperature : <70ºC
Input : SATA Connected
Connection Socket : Small Four Pin

Included :


3pcs of BPTA-NTO1218D3
1pcs of BPTA-DRGBMFC
1pcs of BPTA-PFANMFH

 Info:

*** Bitspower reserves the right to change the product design and interpretations. These are subject to change without notice. Product colors and accessories are based on the actual product. ***
*** From 15th March 2018, all of our installation guides will be provided electronically via an easy-to-use QR code attached to the packaging. ***
*** Before filling in the water, please make sure all the components are installed correctly. To prevent any leakage which may damage the PC components, please perform a 24-hour leaking test with only the pump connected to the power supply. ***
*** When using the leak tester on a water cooling loop, in order to avoid product damage due to excessive pressure, the input pressure should not exceed 0.5kg/cm2 (bar), and do not over 30 second. The leak tester must not be used when there is water in the loop or when the pump is running. If the product is damaged due to excessive pressure or incorrect use, Bitspower's product warranty will be null and void, and the cost of any damage to the hardware will be borne by the customer. ***
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Questions & Answers

Search Q/A
Sort by
Expand All +
pdf
Installation Guide (663.38 KB) Download
Download PDF Download PDF
Recently Viewed
No recently views items
Clear All
Please select a wishlist