Fractal Venturi HF12 120mm Case Fan - Black Fractal Venturi HP12 120mm PWM Case Fan - Black Fractal Venturi HP12 120mm PWM Case Fan - Black SKU FD-FAN-VENT-HP12-PWM-BK
Price Match request for product Fractal Venturi HP12 120mm PWM Case Fan - Black
The Venturi High Pressure Series PWM fans, HP-12 and HP-14, are optimized for high-restriction airflow scenarios, making them an excellent choice for usage on large heatsinks, on radiators, or in other highly restrictive scenarios.
Special Price $14.24 was $18.99
The Venturi High Pressure Series PWM fans, HP-12 and HP-14, are optimized for high-restriction airflow scenarios, making them an excellent choice for usage on large heatsinks, on radiators, or in other highly restrictive scenarios.
Designed with a variety of performance-increasing and noise-reducing features, these fans can move an amazing amount of air through restricted environments compared to other fans at the same, minimal noise level.
The HP-14 comes with two sets of solid vibration-dampening rubber corners: one for standard 140mm fan hole spacing (125mm) and one compatible with the standard 120mm hole spacing (105mm). The Venturi High Pressure Series PWM fans are ideal for those looking for a perfect balance between high performance and low noise built from sturdy, high quality materials.
Featuring true FDB-bearings, providing silent operation coupled with a long lifespan
Equipped with a counter-balanced magnet that reduces the axial tension on the bearing
Features integrated vibration-dampening corners, made from solid high-quality synthetic rubber
Dense, sturdy construction, made from high grade glass fiber reinforced thermoplastic polymer
Fan geometry is optimized for high pressure, delivering high performance results in high restriction usage scenarios, such as in use with large dense heatsinks or water cooling radiators.
Featuring PWM control with a very wide speed range, starting at only 400RPM (400 +/- 100 RPM), ideal for CPU heatsinks or radiators, where the motherboard can control the fan speed based on the CPU temperature.
Aerodynamically shaped thin stator struts reduce noise and unwanted turbulence.
Strategically placed notches on the blades further reduce and diffuse any humming noise produced when the blades pass the stator struts
The trip wire technology introduces a micro-turbulent layer that combats elements that negatively affect performance, resulting in quieter operation
Comes with a PWM Y-cable, for connecting additional fans to a single PWM header on your motherboard or PWM fan controller
140mm fans come with an additional set of vibration-dampening corners are included that lends compatibility with 120mm fan mounts (105mm screw spacing). This enables the use of 140mm fans on many CPU coolers.
Available in 120mm and 140mm fan sizes
Fan
HF-12
HP-12 PWM
HF-14
HP-14 PWM
Size [mm]
120*120*25mm
120*120*25mm
140*140*25mm
140*140*25mm
Colors available
Black blades, black corners, dark grey ("Gunmetal") frame
Black blades, black corners, dark grey ("Gunmetal") frame
Black blades, black corners, dark grey ("Gunmetal") frame
Black blades, black corners, dark grey ("Gunmetal") frame
Screw hole pattern
105*105mm
105*105mm
125*125mm
105*105mm
125*125mm
105*105mm
Connector
3-pin fan header
4-pin fan header
3-pin fan header
4-pin fan header
Bearing
FDB
FDB
FDB
FDB
Number of blades
9
7
11
7
Rotational speed [RPM]
1400
1800
1200
1500
Acoustical noise [dB (A)]
25.3
31.7
26.5
30.1
Maximum air flow [CFM]
83.4
61.4
118.2
78.1
Maximum air flow [m 3 /h]
141.7
104.3
200.8
132.7
Maximum pressure [mm H 2 O]
1.22
2.3
0.95
1.94
Actual input power [W]
1.3
1.0
2.2
1.4
Maximum rated input current [A]
0.2
0.2
0.3
0.2
Nominal input voltage [V]
12V
12V
12V
12V
Minimum startup voltage [V]
4V
6V
4V
7V
Low (0-20%) PWM speed
400 RPM
400 RPM
Low PWM Static pressure
0.45 mm H2O
0.54 mm H2O
Low PWM Air flow
15.4 CFM
26.2 m3/h
24.0 CFM
40.8 m3/h
Low PWM Noise level
< 10 dB (A)
< 10 dB (A)
Low speed adapter speed
1100 RPM
850 RPM
Low speed adapter Static pressure
0.89 mm H2O
0.59 mm H2O
Low speed adapter Air flow
65.8 CFM
111.8 m3/h
78.5 CFM
133.4 m3/h
Low speed adapter Noise level
19.0 dB (A)
18.3 dB (A)
MTBF [hours]
150,000
150,000
150,000
150,000
Unit weight [g]
169
179
202
210
Package weight [g]
215
225
260
270
Cable length [mm]
500
500
500
500
Cable type
Braided all-black ribbon wire
Braided all-black ribbon wire
Braided all-black ribbon wire
Braided all-black ribbon wire
Packaging dimensions [mm]
( Including hanging tab)
180*122*30
180*122*30
200*142*30
200*142*30
Packaging dimensions [mm]
(Excluding hanging tab )
147*122*30
147*122*30
167*142*30
167*142*30
Package contents
Venturi Series fan
Screw pack with 4 metal screws
[HF models] Low speed adapter
[HP models] 1->2 PWM signal splitter cable
[140 mm models] 4 additional rubber corners, with 105mm hole pattern
The fan is well built (please note that I can’t test for long term reliability given timing constraints), relatively quiet and well performing enough to be one of the best radiator optimized fans on the market- at least with medium airflow restriction radiators (or heatsinks, for that matter), has a near universally appealing color scheme, sleeved fan cable that matches the fan color and again goes well with just about any build and priced lower than other high end fans.
To Read More Click "HERE"
Be the first to ask a question about this product
Ask a New Question Hide the Form
Configure
product
https://www.performance-pcs.com/fractal-venturi-hp12-120mm-pwm-case-fan-black-fd-fan-vent-hp12-pwm-bk.html
16226
Fractal Venturi HP12 120mm PWM Case Fan - Black
https://www.performance-pcs.com/media/catalog/product/v/e/ven-hp12_01.jpg
14.24
18.9900
USD
OutOfStock
/Fans & Accessories/120mm Fans
<p>The Venturi High Pressure Series PWM fans, HP-12 and HP-14, are optimized for high-restriction airflow scenarios, making them an excellent choice for usage on large heatsinks, on radiators, or in other highly restrictive scenarios.</p> <p>The Venturi High Pressure Series PWM fans, HP-12 and HP-14, are optimized for high-restriction airflow scenarios, making them an excellent choice for usage on large heatsinks, on radiators, or in other highly restrictive scenarios.</p>
<p>Designed with a variety of performance-increasing and noise-reducing features, these fans can move an amazing amount of air through restricted environments compared to other fans at the same, minimal noise level.</p>
<p>The HP-14 comes with two sets of solid vibration-dampening rubber corners: one for standard 140mm fan hole spacing (125mm) and one compatible with the standard 120mm hole spacing (105mm). The Venturi High Pressure Series PWM fans are ideal for those looking for a perfect balance between high performance and low noise built from sturdy, high quality materials.</p>
<p><img style="width:700;" src="http://www.fractal-design.com/media/5782bcb1-bb69-48bc-8d2d-6926d6569011" alt="" /></p>
Fractal Design
0
0
15.8000
low-stock
Fractal Design
Black
120mm
25mm
4-Pin PWM
12 VDC
1800
61
32
817301013345
<ul>
<li>Featuring true FDB-bearings, providing silent operation coupled with a long lifespan</li>
<li>Equipped with a counter-balanced magnet that reduces the axial tension on the bearing</li>
<li>Features integrated vibration-dampening corners, made from solid high-quality synthetic rubber</li>
<li>Dense, sturdy construction, made from high grade glass fiber reinforced thermoplastic polymer</li>
<li>Fan geometry is optimized for high pressure, delivering high performance results in high restriction usage scenarios, such as in use with large dense heatsinks or water cooling radiators.</li>
<li>Featuring PWM control with a very wide speed range, starting at only 400RPM (400 +/- 100 RPM), ideal for CPU heatsinks or radiators, where the motherboard can control the fan speed based on the CPU temperature.</li>
<li>Aerodynamically shaped thin stator struts reduce noise and unwanted turbulence.</li>
<li>Strategically placed notches on the blades further reduce and diffuse any humming noise produced when the blades pass the stator struts</li>
<li>The trip wire technology introduces a micro-turbulent layer that combats elements that negatively affect performance, resulting in quieter operation</li>
<li>Comes with a PWM Y-cable, for connecting additional fans to a single PWM header on your motherboard or PWM fan controller</li>
<li>140mm fans come with an additional set of vibration-dampening corners are included that lends compatibility with 120mm fan mounts (105mm screw spacing). This enables the use of 140mm fans on many CPU coolers.</li>
<li>Available in 120mm and 140mm fan sizes</li>
</ul>
<p><img style="width:700;" src="http://www.fractal-design.com/media/b89301e3-833e-4f56-94c2-650467ed02a4" alt="" /><img style="width:700;" src="http://www.fractal-design.com/media/fde2950d-f636-411b-abfb-589c581cb15f" alt="" /></p>
<p> </p>
<table cellpadding="0" cellspacing="0">
<tbody>
<tr>
<td valign="top">
<p><strong>Fan</strong></p>
</td>
<td valign="top">
<p><strong>HF-12</strong></p>
</td>
<td valign="top">
<p><strong>HP-12 PWM</strong></p>
</td>
<td valign="top">
<p><strong>HF-14</strong></p>
</td>
<td valign="top">
<p><strong>HP-14 PWM</strong></p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Size [mm]</strong></p>
</td>
<td valign="top">
<p>120*120*25mm</p>
</td>
<td valign="top">
<p>120*120*25mm</p>
</td>
<td valign="top">
<p>140*140*25mm</p>
</td>
<td valign="top">
<p>140*140*25mm</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Colors available</strong></p>
</td>
<td valign="top">
<p>Black blades, black corners, dark grey ("Gunmetal") frame</p>
</td>
<td valign="top">
<p>Black blades, black corners, dark grey ("Gunmetal") frame</p>
</td>
<td valign="top">
<p>Black blades, black corners, dark grey ("Gunmetal") frame</p>
</td>
<td valign="top">
<p>Black blades, black corners, dark grey ("Gunmetal") frame</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Screw hole pattern</strong></p>
</td>
<td valign="top">
<p>105*105mm</p>
</td>
<td valign="top">
<p>105*105mm</p>
</td>
<td valign="top">
<p>125*125mm</p>
<p>105*105mm</p>
</td>
<td valign="top">
<p>125*125mm</p>
<p>105*105mm</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Connector</strong></p>
</td>
<td valign="top">
<p>3-pin fan header</p>
</td>
<td valign="top">
<p>4-pin fan header</p>
</td>
<td valign="top">
<p>3-pin fan header</p>
</td>
<td valign="top">
<p>4-pin fan header</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Bearing</strong></p>
</td>
<td valign="top">
<p>FDB</p>
</td>
<td valign="top">
<p>FDB</p>
</td>
<td valign="top">
<p>FDB</p>
</td>
<td valign="top">
<p>FDB</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Number of blades</strong></p>
</td>
<td valign="top">
<p>9</p>
</td>
<td valign="top">
<p>7</p>
</td>
<td valign="top">
<p>11</p>
</td>
<td valign="top">
<p>7</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Rotational speed [RPM]</strong></p>
</td>
<td valign="top">
<p>1400</p>
</td>
<td valign="top">
<p>1800</p>
</td>
<td valign="top">
<p>1200</p>
</td>
<td valign="top">
<p>1500</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Acoustical noise [dB (A)]</strong></p>
</td>
<td valign="top">
<p>25.3</p>
</td>
<td valign="top">
<p>31.7</p>
</td>
<td valign="top">
<p>26.5</p>
</td>
<td valign="top">
<p>30.1</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Maximum air flow [CFM]</strong></p>
</td>
<td valign="top">
<p>83.4</p>
</td>
<td valign="top">
<p>61.4</p>
</td>
<td valign="top">
<p>118.2</p>
</td>
<td valign="top">
<p>78.1</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Maximum air flow [m</strong> <strong><sup>3</sup></strong> <strong>/h]</strong></p>
</td>
<td valign="top">
<p>141.7</p>
</td>
<td valign="top">
<p>104.3</p>
</td>
<td valign="top">
<p>200.8</p>
</td>
<td valign="top">
<p>132.7</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Maximum pressure [mm H</strong> <strong><sub>2</sub></strong> <strong>O]</strong></p>
</td>
<td valign="top">
<p>1.22</p>
</td>
<td valign="top">
<p>2.3</p>
</td>
<td valign="top">
<p>0.95</p>
</td>
<td valign="top">
<p>1.94</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Actual input power [W]</strong></p>
</td>
<td valign="top">
<p>1.3</p>
</td>
<td valign="top">
<p>1.0</p>
</td>
<td valign="top">
<p>2.2</p>
</td>
<td valign="top">
<p>1.4</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Maximum rated input current [A]</strong></p>
</td>
<td valign="top">
<p>0.2</p>
</td>
<td valign="top">
<p>0.2</p>
</td>
<td valign="top">
<p>0.3</p>
</td>
<td valign="top">
<p>0.2</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Nominal input voltage [V]</strong></p>
</td>
<td valign="top">
<p>12V</p>
</td>
<td valign="top">
<p>12V</p>
</td>
<td valign="top">
<p>12V</p>
</td>
<td valign="top">
<p>12V</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Minimum startup voltage [V]</strong></p>
</td>
<td valign="top">
<p>4V</p>
</td>
<td valign="top">
<p>6V</p>
</td>
<td valign="top">
<p>4V</p>
</td>
<td valign="top">
<p>7V</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Low (0-20%) PWM speed</strong></p>
</td>
<td valign="top"> </td>
<td valign="top">
<p>400 RPM</p>
</td>
<td valign="top"> </td>
<td valign="top">
<p>400 RPM</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Low PWM Static pressure</strong></p>
</td>
<td valign="top"> </td>
<td valign="top">
<p>0.45 mm H2O</p>
</td>
<td valign="top"> </td>
<td valign="top">
<p>0.54 mm H2O</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Low PWM Air flow</strong></p>
</td>
<td valign="top"> </td>
<td valign="top">
<p>15.4 CFM</p>
<p>26.2 m3/h</p>
</td>
<td valign="top"> </td>
<td valign="top">
<p>24.0 CFM</p>
<p>40.8 m3/h</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Low PWM Noise level</strong></p>
</td>
<td valign="top"> </td>
<td valign="top">
<p>< 10 dB (A)</p>
</td>
<td valign="top"> </td>
<td valign="top">
<p>< 10 dB (A)</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Low speed adapter speed</strong></p>
</td>
<td valign="top">
<p>1100 RPM</p>
</td>
<td valign="top"> </td>
<td valign="top">
<p>850 RPM</p>
</td>
<td valign="top"> </td>
</tr>
<tr>
<td valign="top">
<p><strong>Low speed adapter Static pressure</strong></p>
</td>
<td valign="top">
<p>0.89 mm H2O</p>
</td>
<td valign="top"> </td>
<td valign="top">
<p>0.59 mm H2O</p>
</td>
<td valign="top"> </td>
</tr>
<tr>
<td valign="top">
<p><strong>Low speed adapter Air flow</strong></p>
</td>
<td valign="top">
<p>65.8 CFM</p>
<p>111.8 m3/h</p>
</td>
<td valign="top"> </td>
<td valign="top">
<p>78.5 CFM</p>
<p>133.4 m3/h</p>
</td>
<td valign="top"> </td>
</tr>
<tr>
<td valign="top">
<p><strong>Low speed adapter Noise level</strong></p>
</td>
<td valign="top">
<p>19.0 dB (A)</p>
</td>
<td valign="top"> </td>
<td valign="top">
<p>18.3 dB (A)</p>
</td>
<td valign="top"> </td>
</tr>
<tr>
<td valign="top">
<p><strong>MTBF [hours]</strong></p>
</td>
<td valign="top">
<p>150,000</p>
</td>
<td valign="top">
<p>150,000</p>
</td>
<td valign="top">
<p>150,000</p>
</td>
<td valign="top">
<p>150,000</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Unit weight [g]</strong></p>
</td>
<td valign="top">
<p>169</p>
</td>
<td valign="top">
<p>179</p>
</td>
<td valign="top">
<p>202</p>
</td>
<td valign="top">
<p>210</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Package weight [g]</strong></p>
</td>
<td valign="top">
<p>215</p>
</td>
<td valign="top">
<p>225</p>
</td>
<td valign="top">
<p>260</p>
</td>
<td valign="top">
<p>270</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Cable length [mm]</strong></p>
</td>
<td valign="top">
<p>500</p>
</td>
<td valign="top">
<p>500</p>
</td>
<td valign="top">
<p>500</p>
</td>
<td valign="top">
<p>500</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Cable type</strong></p>
</td>
<td valign="top">
<p>Braided all-black ribbon wire</p>
</td>
<td valign="top">
<p>Braided all-black ribbon wire</p>
</td>
<td valign="top">
<p>Braided all-black ribbon wire</p>
</td>
<td valign="top">
<p>Braided all-black ribbon wire</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Packaging dimensions [mm]</strong></p>
<p><strong>( Including hanging tab)</strong></p>
</td>
<td valign="top">
<p>180*122*30</p>
</td>
<td valign="top">
<p>180*122*30</p>
</td>
<td valign="top">
<p>200*142*30</p>
</td>
<td valign="top">
<p>200*142*30</p>
</td>
</tr>
<tr>
<td valign="top">
<p><strong>Packaging dimensions [mm]</strong></p>
<p><strong>(Excluding hanging tab )</strong></p>
</td>
<td valign="top">
<p>147*122*30</p>
</td>
<td valign="top">
<p>147*122*30</p>
</td>
<td valign="top">
<p>167*142*30</p>
</td>
<td valign="top">
<p>167*142*30</p>
</td>
</tr>
</tbody>
</table>
<h4>Package contents</h4>
<ul>
<li>Venturi Series fan</li>
<li>Screw pack with 4 metal screws</li>
<li>[HF models] Low speed adapter</li>
<li>[HP models] 1->2 PWM signal splitter cable</li>
<li>[140 mm models] 4 additional rubber corners, with 105mm hole pattern</li>
</ul>
<div id="header">
<div class="container">
<div id="logo"><a href="http://thermalbench.com" title="" rel="home"><img src="http://thermalbench.com/wp-content/uploads/2015/08/thermalbench3.png" alt="" /></a></div>
</div>
</div>
<p>The fan is well built (please note that I can’t test for long term reliability given timing constraints), relatively quiet and well performing enough to be one of the best radiator optimized fans on the market- at least with medium airflow restriction radiators (or heatsinks, for that matter), has a near universally appealing color scheme, sleeved fan cable that matches the fan color and again goes well with just about any build and priced lower than other high end fans.</p>
<p style="text-align: justify;"><a href="http://imgur.com/sSgrRJ4"><img class="aligncenter" title="source: imgur.com" src="http://i.imgur.com/sSgrRJ4l.jpg" /></a></p>
<p style="text-align: justify;"><a href="http://imgur.com/zWD4hyR"><img class="aligncenter" title="source: imgur.com" src="http://i.imgur.com/zWD4hyRl.png" /></a></p>
<p>To Read More Click <a href="http://thermalbench.com/2016/04/18/fractal-design-venturi-hp-12-120mm-pwm-fan/">"HERE"</a></p>
/Fans & Accessories/120mm Fans
111
59
120mm Fans
https://www.performance-pcs.com/fans-accessories/120mm-fans.html
3
Download PDF
We found other products you might like!
No Stock
Download PDF 
