Facebook Pixel

 

Fractal Design Celsius S24 Cooling Fan/Radiator

Fractal Design Celsius S36 Cooling Fan/Radiator - Blackout

Fractal Design Celsius S24 Cooling Fan/Radiator

Fractal Design Celsius+ S28 Prisma

Fractal Design Celsius+ S28 Prisma

SKU
FD-W-2-S2802

Celsius+ takes AIO water cooling to a new level with an ARGB-accented pump face, a fully redesigned block and an upgraded on-radiator PWM fan hub with ARGB support.

$189.99
In stock Low Stock 1 left
More Information on Shipping

Celsius+

Cool, quiet and colorful


Celsius+ takes AIO water cooling to a new level with an ARGB-accented
pump face, a fully redesigned block and an upgraded on-radiator PWM fan
hub with ARGB support.
Cleverly concealed wiring in the Celsius’ braided sleeve tubing cleanly
connects both power and RGB for the entire system at the pump, and
selectable auto/PWM modes offer smart, dynamically optimized
performance with the choice of full user control for expert fine-tuning.
Available sizes include 240 mm, 280 mm, and 360 mm, each with a choice
of Dynamic X2 or Prisma ARGB fans pre-installed

• Tinted glass pump face with backlit logo and ARGB LED effects
• Smart auto control mode dynamically adjusts fan and pump speeds for the ideal balance of silence and cooling performance
• Twist the pump face to change from auto to PWM mode for full user control
• ARGB-enabled PWM hub places all fan connections directly on the radiator for a clutter-free installation
• Sleeved tubing with concealed wiring connects power and ARGB for the entire system at the pump
• Asus AURA, Gigabyte Fusion, MSI Mystic Light, Razer Chroma and ASRock Polychrome support
• Pre-applied thermal paste guarantees optimal application with even coverage
• Low-permeability rubber tubing with nylon braided sleeves for extra durability and an added touch of style
• Articulating elbow fittings make tubes easier to route while reducing tension on the pump
• Prisma ARGB PWM fans deliver outstanding airflow with brilliant lighting effects (Prisma versions only)
• Specially designed fan blades and outer ring produce a uniform glow (Prisma versions only)
• High-performance Dynamic X2 PWM fans provide excellent airflow with minimal noise (Dynamic versions only)
• Optimized fan geometry balances airflow with extra emphasis on static pressure
• Strategic blade notches diffuse noise from blade/stator interaction (Dynamic versions only)
• Trip Wire technology reduces blade turbulence
• LLS (Long Life Sleeve) fan bearings provide silent operation with a long lifespan
• Backed by a 5-year warranty for extended peace of mind

General specifications

  • Sockets supported (Intel)
    1200, 1150, 1151, 1155, 1156, 1366, 2011, 2011-3, 2066
  • Sockets supported (AMD)
    AM2, AM2+, AM3, AM3+, AM4, FM1, FM2, FM2+
  • Coldplate material
    Copper
  • Thermal paste
    Pre-applied
  • Tube length
    400 mm
  • Tube material
    Low-permeability rubber with braided nylon sleeve
  • Fittings, block side
    Articulating 90-degree elbow
  • Fittings, radiator side
    Straight rotary
  • Fan control
    Dual mode (Auto/PWM)
  • Note:
    The Celsius+ is NOT compatible with the Adjust R1

Fan specifications

  • Fan type
    Prisma AL-14 PWM ARGB
  • Rotational speed
    500 – 1700 RPM
  • Bearing
    LLS
  • PWM control
    Yes
  • Acoustical noise (full speed)
    34.1 dBA
  • Maximum air flow
    103.9 CFM
  • Maximum static pressure
    2.38 mm H2O
  • Input voltage
    12V DC
  • Maximum input current
    0.18A
  • MTBF
    100,000 hours

Pump specifications

  • Rotational speed
    800-2800 RPM in normal use, 3500 RPM during thermal protection mode that activates if liquid temperature is over 60°C
  • Bearing type
    Ceramic bearing and shaft
  • PWM control
    Yes
  • Acoustical noise (full speed)
    20 dBA
  • Maximum pressure
    14.4 kPa / 1.46 mm H2O /2.0 PSI
  • Input voltage
    12V DC
  • Input current (without fans)
    0.36A
  • MTTF
    50,000 hours
  • Block height
    45 mm
  • Block measurements (with fittings)
    86 x 75 mm
  • Block diameter (main block body)
    62 mm

Radiator specifications

  • Dimensions
    143 x 30 x 324 mm
  • Housing material
    Aluminum
  • Fin material
    Aluminum
  • Fan screw threads
    6-32

Other

  • Package contents
    Celsius+ S28 unit, 2 x 140 mm fans, User manual, Mounting hardware for all listed sockets, Fan and radiator mounting screws
  • Package Dimensions
    411 x 187 x 160 mm
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Questions & Answers

Search Q/A
Sort by
Expand All +
Download PDF Download PDF
We found other products you might like!
Recently Viewed
No recently views items
Clear All
Please select a wishlist