ThisĀ IDE CF adapter offers a
cost-effective Compact Flash storage solution, allowing you to create a simple
DIY SSD (Do-it-yourself Solid State Drive).
The IDE CF adapter lets you install a Compact
Flash (type I, type II) or Micro Drive as a bootable hard drive, connected to
any 3.5in (40-pin) IDE host interface. A convenient, cost-effective SSD
solution, the IDE CF adapter requires no driver installation, and is compatible
with any system that supports the IDE interface.
A versatile storage solution, the IDE CF adapter
offers +3.3V or +5.0V voltage selection (based on CF card voltage support) and
features on-board LED indicators that display CF access and power-on status.
A dependable, cost-effective solution for
turning Compact Flash media into bootable IDE storage, the IDE CF adapter is
backed by a 1-year warranty and free lifetime technical support.
Features:
Full compatibility with Flash Type I, Type
II, and Micro-drive
IDE2CFINT requires no drivers, will work
with any system that supports IDE interface
On-board LED indicators for power-on and
compact flash access
Quick, easy installation -direct insertion
into any 40-pin (2.54mm) standard IDE connector
Reading-performance, anti-shock ability and
tolerance of the the temperature difference are better than traditional hard
drives
Voltage selection for +3.3V or +5.0V
compact flash
Applications:
Diskless network clients
Linux-based set-top boxes, firewalls,
routers
Industrial computers
Any device requiring rugged solid-state
storage
Specifications:
Warranty
1 Year
warranty
Connector Types
1 - IDE 40 pin Female
Operating Temperature
0-70
Carton Quantity
120
Shipping (Package) Weight
0.09 lb [0.04 kg]
General Specifications
On-board LED indicators for
power-on and compact flash access
General Specifications
Voltage selection for +3.3V or +5V
compact flash
General Specifications
Master or slave mode selection
Power input
+5V, floppy disk drive power
connector
General Specifications
Fully compatible with Compact Flash
Type I, Type II, and Micro-drive
General Specifications
This adapter does NOT support hot
insertion of CF cards
ThisĀ IDE CF adapter offers a
cost-effective Compact Flash storage solution, allowing you to create a simple
DIY SSD (Do-it-yourself Solid State Drive).
The IDE CF adapter lets you install a Compact
Flash (type I, type II) or Micro Drive as a bootable hard drive, connected to
any 3.5in (40-pin) IDE host interface. A convenient, cost-effective SSD
solution, the IDE CF adapter requires no driver installation, and is compatible
with any system that supports the IDE interface.
A versatile storage solution, the IDE CF adapter
offers +3.3V or +5.0V voltage selection (based on CF card voltage support) and
features on-board LED indicators that display CF access and power-on status.
A dependable, cost-effective solution for
turning Compact Flash media into bootable IDE storage, the IDE CF adapter is
backed by a 1-year warranty and free lifetime technical support.
Features:
Full compatibility with Flash Type I, Type
II, and Micro-drive
IDE2CFINT requires no drivers, will work
with any system that supports IDE interface
On-board LED indicators for power-on and
compact flash access
Quick, easy installation -direct insertion
into any 40-pin (2.54mm) standard IDE connector
Reading-performance, anti-shock ability and
tolerance of the the temperature difference are better than traditional hard
drives
Voltage selection for +3.3V or +5.0V
compact flash
Applications:
Diskless network clients
Linux-based set-top boxes, firewalls,
routers
Industrial computers
Any device requiring rugged solid-state
storage
Specifications:
Warranty
1 Year
warranty
Connector Types
1 - IDE 40 pin Female
Operating Temperature
0-70
Carton Quantity
120
Shipping (Package) Weight
0.09 lb [0.04 kg]
General Specifications
On-board LED indicators for
power-on and compact flash access
General Specifications
Voltage selection for +3.3V or +5V
compact flash
General Specifications
Master or slave mode selection
Power input
+5V, floppy disk drive power
connector
General Specifications
Fully compatible with Compact Flash
Type I, Type II, and Micro-drive
General Specifications
This adapter does NOT support hot
insertion of CF cards
https://www.performance-pcs.com/ide-40-pin-to-compact-flash-ssd-adapter-ide2cfint.html5467IDE 40 Pin to Compact Flash SSD Adapterhttps://www.performance-pcs.com/media/catalog/product/t/m/tmpide2cfint.jpg10.4714.9500USDOutOfStock/System Hardware/Storage Devices/Solid State Drives& Accy.<h3><font face="Tahoma">Product Details:</font></h3><span id="lblProductDescription" class="TextNormal">
<p><font size="2" face="Tahoma">ThisĀ IDE CF adapter offers a
cost-effective Compact Flash storage solution, allowing you to create a simple
DIY SSD (Do-it-yourself Solid State Drive). </font></p>
<p><font size="2" face="Tahoma">The IDE CF adapter lets you install a Compact
Flash (type I, type II) or Micro Drive as a bootable hard drive, connected to
any 3.5in (40-pin) IDE host interface. A convenient, cost-effective SSD
solution, the IDE CF adapter requires no driver installation, and is compatible
with any system that supports the IDE interface.</font></p>
<p><font size="2" face="Tahoma">A versatile storage solution, the IDE CF adapter
offers +3.3V or +5.0V voltage selection (based on CF card voltage support) and
features on-board LED indicators that display CF access and power-on status.</font></p>
<p><font size="2" face="Tahoma">A dependable, cost-effective solution for
turning Compact Flash media into bootable IDE storage, the IDE CF adapter is
backed by a 1-year warranty and free lifetime technical support.</font></p>
</span>
<p><font size="2" face="Tahoma"><b>Features:</b></font></p>
<ul><li><font size="2" face="Tahoma">Full compatibility with Flash Type I, Type
II, and Micro-drive </font></li><li><font size="2" face="Tahoma">IDE2CFINT requires no drivers, will work
with any system that supports IDE interface </font></li><li><font size="2" face="Tahoma">On-board LED indicators for power-on and
compact flash access </font></li><li><font size="2" face="Tahoma">Quick, easy installation -direct insertion
into any 40-pin (2.54mm) standard IDE connector </font></li><li><font size="2" face="Tahoma">Reading-performance, anti-shock ability and
tolerance of the the temperature difference are better than traditional hard
drives </font></li><li><font size="2" face="Tahoma">Voltage selection for +3.3V or +5.0V
compact flash</font></li></ul>
<p><font size="2" face="Tahoma"><b>Applications:</b></font></p>
<ul><li><font size="2" face="Tahoma">Diskless network clients</font></li><li><font size="2" face="Tahoma">Linux-based set-top boxes, firewalls,
routers</font></li><li><font size="2" face="Tahoma">Industrial computers</font></li><li><font size="2" face="Tahoma">Any device requiring rugged solid-state
storage</font></li></ul>
<p><font size="2" face="Tahoma"><b>Specifications:</b></font></p>
<table width="450">
<tbody><tr id="trWarranty">
<td>
<table width="488" cellspacing="0" cellpadding="3" border="1">
<tbody><tr>
<td width="30%" class="BottomBorder TextNormal">
<font size="2" face="Tahoma">Warranty</font></td>
<td width="67%" class="BottomBorder TextNormal">
<font size="2" face="Tahoma"><span id="lblWarranty">1 Year
warranty</span></font></td>
</tr>
</tbody></table>
</td>
</tr>
<tr>
<td>
<table cellspacing="0" cellpadding="3" border="1" id="dtgSpecs" style="width: 490px; border-collapse: collapse;">
<tbody><tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">Connector Types</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">1 - IDE 40 pin Female </font></td>
</tr>
<tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">Operating Temperature</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">0-70 </font></td>
</tr>
<tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">Carton Quantity</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">120 </font></td>
</tr>
<tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">Shipping (Package) Weight</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">0.09 lb [0.04 kg]</font></td>
</tr>
<tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">General Specifications</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">On-board LED indicators for
power-on and compact flash access </font></td>
</tr>
<tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">General Specifications</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">Voltage selection for +3.3V or +5V
compact flash </font></td>
</tr>
<tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">General Specifications</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">Master or slave mode selection
</font></td>
</tr>
<tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">Power input</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">+5V, floppy disk drive power
connector </font></td>
</tr>
<tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">General Specifications</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">Fully compatible with Compact Flash
Type I, Type II, and Micro-drive </font></td>
</tr>
<tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">General Specifications</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">This adapter does NOT support hot
insertion of CF cards </font></td>
</tr>
</tbody></table>
</td>
</tr>
</tbody></table>
<p /> <h3><font face="Tahoma">Product Details:</font></h3><span id="lblProductDescription" class="TextNormal">
<p><font size="2" face="Tahoma">ThisĀ IDE CF adapter offers a
cost-effective Compact Flash storage solution, allowing you to create a simple
DIY SSD (Do-it-yourself Solid State Drive). </font></p>
<p><font size="2" face="Tahoma">The IDE CF adapter lets you install a Compact
Flash (type I, type II) or Micro Drive as a bootable hard drive, connected to
any 3.5in (40-pin) IDE host interface. A convenient, cost-effective SSD
solution, the IDE CF adapter requires no driver installation, and is compatible
with any system that supports the IDE interface.</font></p>
<p><font size="2" face="Tahoma">A versatile storage solution, the IDE CF adapter
offers +3.3V or +5.0V voltage selection (based on CF card voltage support) and
features on-board LED indicators that display CF access and power-on status.</font></p>
<p><font size="2" face="Tahoma">A dependable, cost-effective solution for
turning Compact Flash media into bootable IDE storage, the IDE CF adapter is
backed by a 1-year warranty and free lifetime technical support.</font></p>
</span>
<p><font size="2" face="Tahoma"><b>Features:</b></font></p>
<ul><li><font size="2" face="Tahoma">Full compatibility with Flash Type I, Type
II, and Micro-drive </font></li><li><font size="2" face="Tahoma">IDE2CFINT requires no drivers, will work
with any system that supports IDE interface </font></li><li><font size="2" face="Tahoma">On-board LED indicators for power-on and
compact flash access </font></li><li><font size="2" face="Tahoma">Quick, easy installation -direct insertion
into any 40-pin (2.54mm) standard IDE connector </font></li><li><font size="2" face="Tahoma">Reading-performance, anti-shock ability and
tolerance of the the temperature difference are better than traditional hard
drives </font></li><li><font size="2" face="Tahoma">Voltage selection for +3.3V or +5.0V
compact flash</font></li></ul>
<p><font size="2" face="Tahoma"><b>Applications:</b></font></p>
<ul><li><font size="2" face="Tahoma">Diskless network clients</font></li><li><font size="2" face="Tahoma">Linux-based set-top boxes, firewalls,
routers</font></li><li><font size="2" face="Tahoma">Industrial computers</font></li><li><font size="2" face="Tahoma">Any device requiring rugged solid-state
storage</font></li></ul>
<p><font size="2" face="Tahoma"><b>Specifications:</b></font></p>
<table width="450">
<tbody><tr id="trWarranty">
<td>
<table width="488" cellspacing="0" cellpadding="3" border="1">
<tbody><tr>
<td width="30%" class="BottomBorder TextNormal">
<font size="2" face="Tahoma">Warranty</font></td>
<td width="67%" class="BottomBorder TextNormal">
<font size="2" face="Tahoma"><span id="lblWarranty">1 Year
warranty</span></font></td>
</tr>
</tbody></table>
</td>
</tr>
<tr>
<td>
<table cellspacing="0" cellpadding="3" border="1" id="dtgSpecs" style="width: 490px; border-collapse: collapse;">
<tbody><tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">Connector Types</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">1 - IDE 40 pin Female </font></td>
</tr>
<tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">Operating Temperature</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">0-70 </font></td>
</tr>
<tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">Carton Quantity</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">120 </font></td>
</tr>
<tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">Shipping (Package) Weight</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">0.09 lb [0.04 kg]</font></td>
</tr>
<tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">General Specifications</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">On-board LED indicators for
power-on and compact flash access </font></td>
</tr>
<tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">General Specifications</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">Voltage selection for +3.3V or +5V
compact flash </font></td>
</tr>
<tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">General Specifications</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">Master or slave mode selection
</font></td>
</tr>
<tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">Power input</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">+5V, floppy disk drive power
connector </font></td>
</tr>
<tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">General Specifications</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">Fully compatible with Compact Flash
Type I, Type II, and Micro-drive </font></td>
</tr>
<tr>
<td class="BottomBorder TextNormal" style="width: 30%;">
<font size="2" face="Tahoma">General Specifications</font></td>
<td class="BottomBorder TextNormal" style="width: 66%;">
<font size="2" face="Tahoma">This adapter does NOT support hot
insertion of CF cards </font></td>
</tr>
</tbody></table>
</td>
</tr>
</tbody></table>
<p />Startech0011.5000add-to-cartlow-stockStartechBlackSSD Adapter Card
/System Hardware/Storage Devices/Solid State Drives& Accy.195432Solid State Drives& Accy.https://www.performance-pcs.com/system-hardware/storage-devices/storage-drives-accy.html14