Koolance's ALX series are powerful liquid cooling systems with expandable thermal capacities and software logging. ALX-1450-P400 provides approximately 1450W of cooling using a dual fan radiator.
Koolance's ALX series are powerful liquid cooling systems with expandable thermal capacities and software logging. ALX-1450-P400 provides approximately 1450W of cooling using a dual fan radiator.
This version includes the RPM-ALX400 and HXM-ALX1450 modules. These are quickly combined during installation, and individually upgradeable if requirements later change. The front "RPM" contains the pump, reservoir, electronics, and sensors. The rear "HXM" houses the heat exchanger, fans, and flow meter.
A USB port is integrated for viewing and logging of temperature and sensor data using the Koolance System Monitor application.
***PLEASE NOTE: You will need the Koolance DC12V PSU (PSU-ALX12V) to run and ALX unit. You CANNOT use your computers 12V DC PSU for this! All ALX units use NPT fittings are needed for the hoses in and out of the front of the unit. Do NOT order BSPP (G1/4) fittings for this!
Configure Koolance ALX-1450-P400 Modular Liquid Cooling System
OR
product
https://www.performance-pcs.com/koolance-alx-1450-p400-modular-liquid-cooling-system-alx-1450-p400.html23237Koolance ALX-1450-P400 Modular Liquid Cooling Systemhttps://www.performance-pcs.com/media/catalog/product/t/m/tmpalx-1450-p400_p1-700x700.jpg989.99989.9900USDInStock/Water Cooling/External Cooling System<p>Koolance's ALX series are powerful liquid cooling systems with expandable thermal capacities and software logging. ALX-1450-P400 provides approximately 1450W of cooling using a dual fan radiator.</p> <p>Koolance's ALX series are powerful liquid cooling systems with expandable thermal capacities and software logging. ALX-1450-P400 provides approximately 1450W of cooling using a dual fan radiator.</p>
<p>This version includes the RPM-ALX400 and HXM-ALX1450 modules. These are quickly combined during installation, and individually upgradeable if requirements later change. The front "RPM" contains the pump, reservoir, electronics, and sensors. The rear "HXM" houses the heat exchanger, fans, and flow meter.</p>
<p>A USB port is integrated for viewing and logging of temperature and sensor data using the Koolance System Monitor application.</p>
<p><strong>***PLEASE NOTE: You will need the Koolance DC12V PSU (PSU-ALX12V) to run and ALX unit. You CANNOT use your computers 12V DC PSU for this! All ALX units use NPT fittings are needed for the hoses in and out of the front of the unit. Do NOT order BSPP (G1/4) fittings for this!</strong></p>Koolance00https://www.performance-pcs.com/media/catalog/product/t/m/tmpalx-1450-p400_p2-700x700.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmphxm-alx_p3-700x700_2000_2_1.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmpalx-software_p4-700x700_1_1.jpg864.1600low-stockKoolanceBlack400ml1450W1.4 Gal/Min12V DCSpecial Order<ul>
<li>Cooling capacity: 1450W (4948BTU/hr) with 25°C liquid-ambient delta @ 5.3LPM</li>
<li>Temperature in °C/°F with set-point based on: liquid (-30 to 90°C), or one of two optional K-type thermocouples (-20 to 120°C)</li>
<li>Pump: 10 manual levels, up to 5.3LPM (1.4GPM)</li>
<li>Select only values you want displayed on the front 2-line OLED display (fixed or rotating)</li>
<li>Show coolant flow rate in LPM/GPM</li>
<li>Show pump impeller speed in RPM</li>
<li>Show radiator fan speed in RPM</li>
<li>Enable audio alarm based on: temperature, flow rate, and/or reservoir coolant level</li>
<li>Enable relay trigger (NO or NC) based on: temperature, flow rate, and/or reservoir coolant level</li>
<li>Power input: 12VDC, 73W or higher</li>
<li>Reservoir capacity: 400ml (13.5 fl oz)</li>
<li>1/4 NPT threads on back for fittings</li>
</ul><table class="attribute">
<thead>
<tr>
<td colspan="2">General</td>
</tr>
</thead>
<tbody>
<tr>
<td>Max Pressure @ 25°C</td>
<td>2kgf/cm2 (28.5psi)</td>
</tr>
<tr>
<td>Max Temperature</td>
<td>60°C (140°F)</td>
</tr>
</tbody>
<thead>
<tr>
<td colspan="2">Cooling Systems</td>
</tr>
</thead>
<tbody>
<tr>
<td>Cooling Capacity</td>
<td>1450W (4948BTU/hr) @ 25°C liquid-ambient (25°C dT)</td>
</tr>
<tr>
<td>Display Type</td>
<td>OLED</td>
</tr>
<tr>
<td>Flow Rate</td>
<td>5.3LPM (1.4GPM)</td>
</tr>
<tr>
<td>Max Power Consumption</td>
<td>73W</td>
</tr>
<tr>
<td>Power Source</td>
<td>12 VDC</td>
</tr>
<tr>
<td>Radiator</td>
<td>Brass/Copper, 2 x 120mm fans</td>
</tr>
<tr>
<td>Temperature Sensors</td>
<td>Liquid & Two K-Type Thermocouples (optional)</td>
</tr>
</tbody>
</table>
<p><img src="https://koolance.com/files/products/graphs/alx-xxx_g1.gif" alt="alx-xxx_g1.gif" /></p>
<p><img src="https://koolance.com/files/products/graphs/alx-xxx_g2.gif" alt="alx-xxx_g2.gif" /></p>
<p><img src="https://koolance.com/files/products/graphs/alx-xxx_g3.gif" alt="alx-xxx_g3.gif" /></p>