Lian Li LanCool K56 (PC-K56-B) Advance Mid Tower Computer PC Case-
BLACK, Supports CrossfireX and 3-Way SLI
The Dragon Lord K
series builds LanCools high standard of Quality requirement. This SECC
steel cases with completely tool-less design are the perfect complement
to a PC gamers needs. The look of Dragon Lord K58 has no door panel
design; users can access the external drive easier. The two red stripes
on the front panel done in attractive anodized aluminum give a
flamboyant finishing touch to this outstanding high-end chassis.
Features:
The hardware installation with Dragon Lord K56
is very easy and simple. The front panel is detachable and they can be removed
without tools.
The Dragon Lord K56 is targeted for the LAN party gamers. It is a mid-tower
case, which is ideal for the latest graphics cards in combination with the best
thermal dynamics. Especially in the advent of adding in new graphics cards,
equipped with 8 PCI slots, can hold three or more graphics cards, supports
CrossfireX and 3-way SLI.
The new internal layout has the motherboard on top of the power supply unit,
which allows for easier access to the motherboard as well as more room above,
thus larger CPU coolers can be used. The power supply unit at the button of the
case is cooled with fresh cool air directly from the outside of the case,
instead of pre-heated air from within. This will bring down the core
temperatures and extend the lifespan of the PSU significantly.
To install motherboard require no tools, use tool-less screw to screw a
motherboard on case, easily and quickly.
Silent Performance:
The new 5.25 bay tool-less mounting incorporates a mounting bar equipped with
rubber padding. After secure the mounting bar, the rubber pad pushes and holds
the 5.25 device in position to secure and absorb vibration from the device.
The Power Supply has rubber pads for both insulation and support. The mounting
clip is also aligned with rubber to reduce vibrations but also and also secure
the PSU without scratching the painted surface.
There are special air intake vents at the front of the case, allow cold air to
enter , also keep system noise inside the case.
Creative Thermal Solutions:
Dragon Lord K56 inputs cold air by the 120mm (1200RPM) intake fan, There are
also vents on the 5.25 bezels, allow cold air to enter the case to cool the
system down
The rear 120mm exhaust fan just next to the CPU, it can remove the hot air out
fast and silently.
There are vents on the PCI slots, provides extra cooling to graphics card.
The power supply unit is at the bottom of the case. It can draw in cold air
directly through the vent below the power supply unit. This cooler, fresh air
will keep your PSU components more cool and stable and thus extend the PSU
lifecycle.
Dragon Lord K56 supports liquid cooling system, the two holes at the rear of the
case allows water tubes to pass through, and the rubber cover can protect the
tubes away from cutting.
The Dragon Load k56 feature a high density vent design, to make sure fans remove
the system hot air out of the case totally.
User Friendly:
2009 has seen an all-new tool-less design from Dragon Lord K series chassis. To
do this required a great many innovative patents to be filed worldwide. The
ideas will make installing and maintenance much easier. For example when
installing the 5.25 optical drive, just slide the drive into the 5.25 bay, and
close the mounting bar to secure the optical drive, as simple as that.
Anti-vibration HDD cage, with anti-vibration kit and special HDD mounting rack.
User can easily install the HDD into the cage. And the rubber rings on the HDD,
absorb the vibration to stop the noise.
To install PSU require no tools. Simply open the aluminum PSU holder, insert the
PSU in position, also can turn PSU's fans up or down to suit your need, then
close the aluminum PSU holder.
The intake fans are aligned with inlet holes on the bezels. These are equipped
with air filters to stop the dust and keep the internals dust free and clean.
Lian Li LanCool K56 (PC-K56-B) Advance Mid Tower Computer PC Case-
BLACK, Supports CrossfireX and 3-Way SLI
The Dragon Lord K
series builds LanCools high standard of Quality requirement. This SECC
steel cases with completely tool-less design are the perfect complement
to a PC gamers needs. The look of Dragon Lord K58 has no door panel
design; users can access the external drive easier. The two red stripes
on the front panel done in attractive anodized aluminum give a
flamboyant finishing touch to this outstanding high-end chassis.
Features:
The hardware installation with Dragon Lord K56
is very easy and simple. The front panel is detachable and they can be removed
without tools.
The Dragon Lord K56 is targeted for the LAN party gamers. It is a mid-tower
case, which is ideal for the latest graphics cards in combination with the best
thermal dynamics. Especially in the advent of adding in new graphics cards,
equipped with 8 PCI slots, can hold three or more graphics cards, supports
CrossfireX and 3-way SLI.
The new internal layout has the motherboard on top of the power supply unit,
which allows for easier access to the motherboard as well as more room above,
thus larger CPU coolers can be used. The power supply unit at the button of the
case is cooled with fresh cool air directly from the outside of the case,
instead of pre-heated air from within. This will bring down the core
temperatures and extend the lifespan of the PSU significantly.
To install motherboard require no tools, use tool-less screw to screw a
motherboard on case, easily and quickly.
Silent Performance:
The new 5.25 bay tool-less mounting incorporates a mounting bar equipped with
rubber padding. After secure the mounting bar, the rubber pad pushes and holds
the 5.25 device in position to secure and absorb vibration from the device.
The Power Supply has rubber pads for both insulation and support. The mounting
clip is also aligned with rubber to reduce vibrations but also and also secure
the PSU without scratching the painted surface.
There are special air intake vents at the front of the case, allow cold air to
enter , also keep system noise inside the case.
Creative Thermal Solutions:
Dragon Lord K56 inputs cold air by the 120mm (1200RPM) intake fan, There are
also vents on the 5.25 bezels, allow cold air to enter the case to cool the
system down
The rear 120mm exhaust fan just next to the CPU, it can remove the hot air out
fast and silently.
There are vents on the PCI slots, provides extra cooling to graphics card.
The power supply unit is at the bottom of the case. It can draw in cold air
directly through the vent below the power supply unit. This cooler, fresh air
will keep your PSU components more cool and stable and thus extend the PSU
lifecycle.
Dragon Lord K56 supports liquid cooling system, the two holes at the rear of the
case allows water tubes to pass through, and the rubber cover can protect the
tubes away from cutting.
The Dragon Load k56 feature a high density vent design, to make sure fans remove
the system hot air out of the case totally.
User Friendly:
2009 has seen an all-new tool-less design from Dragon Lord K series chassis. To
do this required a great many innovative patents to be filed worldwide. The
ideas will make installing and maintenance much easier. For example when
installing the 5.25 optical drive, just slide the drive into the 5.25 bay, and
close the mounting bar to secure the optical drive, as simple as that.
Anti-vibration HDD cage, with anti-vibration kit and special HDD mounting rack.
User can easily install the HDD into the cage. And the rubber rings on the HDD,
absorb the vibration to stop the noise.
To install PSU require no tools. Simply open the aluminum PSU holder, insert the
PSU in position, also can turn PSU's fans up or down to suit your need, then
close the aluminum PSU holder.
The intake fans are aligned with inlet holes on the bezels. These are equipped
with air filters to stop the dust and keep the internals dust free and clean.
Configure Lian Li Lancool Dragon Lord PC-K56 Aluminum/ SECC ATX Mid Tower Computer Case
OR
product
https://www.performance-pcs.com/lian-li-lancool-dragon-lord-pc-k56-aluminum-secc-atx-mid-tower-computer-case-pc-k56.html5532Lian Li Lancool Dragon Lord PC-K56 Aluminum/ SECC ATX Mid Tower Computer Casehttps://www.performance-pcs.com/media/catalog/product/t/m/tmpk56b_main_01.jpg74.9974.9900USDInStock/Chassis/Midtower Chassis<h3><font face="Tahoma">Product Details:</font></h3><div align="left">
<font face="Tahoma" size="2"> <font size="2"></font></font><div align="left">
<font face="Tahoma" size="2"> <b>Lian Li LanCool K56 (PC-K56-B) Advance Mid Tower Computer PC Case-
BLACK, Supports CrossfireX and 3-Way SLI</b></font><p><font face="Tahoma" size="2">The Dragon Lord K
series builds LanCools high standard of Quality requirement. This SECC
steel cases with completely tool-less design are the perfect complement
to a PC gamers needs. The look of Dragon Lord K58 has no door panel
design; users can access the external drive easier. The two red stripes
on the front panel done in attractive anodized aluminum give a
flamboyant finishing touch to this outstanding high-end chassis.</font></p></div>
</div>
<p><font face="Tahoma" size="2"><b>Features:</b></font></p>
<ul><li><font face="Tahoma" size="2">The hardware installation with Dragon Lord K56
is very easy and simple. The front panel is detachable and they can be removed
without tools.</font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">The Dragon Lord K56 is targeted for the LAN party gamers. It is a mid-tower
case, which is ideal for the latest graphics cards in combination with the best
thermal dynamics. Especially in the advent of adding in new graphics cards,
equipped with 8 PCI slots, can hold three or more graphics cards, supports
CrossfireX and 3-way SLI.</font></font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">The new internal layout has the motherboard on top of the power supply unit,
which allows for easier access to the motherboard as well as more room above,
thus larger CPU coolers can be used. The power supply unit at the button of the
case is cooled with fresh cool air directly from the outside of the case,
instead of pre-heated air from within. This will bring down the core
temperatures and extend the lifespan of the PSU significantly.</font></font></li><li>
<font face="Tahoma" size="2">To install motherboard require no tools, use tool-less screw to screw a
motherboard on case, easily and quickly.</font></li></ul><p><font face="Tahoma" size="2">
<b>Silent Performance:</b></font></p><ul><li><font face="Tahoma" size="2">
The new 5.25 bay tool-less mounting incorporates a mounting bar equipped with
rubber padding. After secure the mounting bar, the rubber pad pushes and holds
the 5.25 device in position to secure and absorb vibration from the device.</font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">The Power Supply has rubber pads for both insulation and support. The mounting
clip is also aligned with rubber to reduce vibrations but also and also secure
the PSU without scratching the painted surface.</font></font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">There are special air intake vents at the front of the case, allow cold air to
enter , also keep system noise inside the case.</font></font></li></ul>
<font face="Tahoma" size="2"><b>Creative Thermal Solutions:</b></font><ul><li><font face="Tahoma" size="2">
Dragon Lord K56 inputs cold air by the 120mm (1200RPM) intake fan, There are
also vents on the 5.25 bezels, allow cold air to enter the case to cool the
system down</font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">The rear 120mm exhaust fan just next to the CPU, it can remove the hot air out
fast and silently.</font></font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">There are vents on the PCI slots, provides extra cooling to graphics card.</font></font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">The power supply unit is at the bottom of the case. It can draw in cold air
directly through the vent below the power supply unit. This cooler, fresh air
will keep your PSU components more cool and stable and thus extend the PSU
lifecycle.</font></font></li><li><font face="Tahoma" size="2">Dragon Lord K56 supports liquid cooling system, the two holes at the rear of the
case allows water tubes to pass through, and the rubber cover can protect the
tubes away from cutting.</font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">The Dragon Load k56 feature a high density vent design, to make sure fans remove
the system hot air out of the case totally.</font></font></li></ul><p><font face="Tahoma" size="2">
<b>User Friendly:</b></font></p><ul><li><font face="Tahoma" size="2">2009 has seen an all-new tool-less design from Dragon Lord K series chassis. To
do this required a great many innovative patents to be filed worldwide. The
ideas will make installing and maintenance much easier. For example when
installing the 5.25 optical drive, just slide the drive into the 5.25 bay, and
close the mounting bar to secure the optical drive, as simple as that.</font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">Anti-vibration HDD cage, with anti-vibration kit and special HDD mounting rack.
User can easily install the HDD into the cage. And the rubber rings on the HDD,
absorb the vibration to stop the noise.</font></font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">To install PSU require no tools. Simply open the aluminum PSU holder, insert the
PSU in position, also can turn PSU's fans up or down to suit your need, then
close the aluminum PSU holder.</font></font></li><li><font face="Tahoma" size="2">The intake fans are aligned with inlet holes on the bezels. These are equipped
with air filters to stop the dust and keep the internals dust free and clean.</font></li></ul>
<p><font face="Tahoma" size="2"><b>Specifications:</b></font> </p><div align="left"><font face="Tahoma" color="#676767" size="2"><table width="658" cellspacing="0" cellpadding="3" border="1" bgcolor="#ffffff">
<tbody><tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Model</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">PC-K56 </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Case Type</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">Advance Mid Tower
</font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Dimensions
</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">210mm x 460mm x 490
mm (W, H, D) </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Front bezel
Material</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">Plastic </font>
</td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Color</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">Black </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Side Panel</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">CECC Steel </font>
</td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Body
Material</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">CECC Steel </font>
</td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Net Weight
</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">8.85kg </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>5.25 drive
bay (External)</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">5 </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>3.5 drive
bay (External)</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2"> </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>3.5 drive
bay (Internal)</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">4 </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Expansion
Slot</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">8 </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Motherboard</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">ATX / M-ATX </font>
</td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>System Fan
(Front)</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">120mm Fan x 1
(1200RPM) </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>System Fan
(Top)</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2"> </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>System Fan
(Rear)</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">120mm Fan x 1
(1500RPM) </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>I/O Ports</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">USB2.0 x 2 /
HD+AC97 Audio </font></td>
</tr>
</tbody></table>
</font></div>
<br /><br /> <h3><font face="Tahoma">Product Details:</font></h3><div align="left">
<font face="Tahoma" size="2"> <font size="2"></font></font><div align="left">
<font face="Tahoma" size="2"> <b>Lian Li LanCool K56 (PC-K56-B) Advance Mid Tower Computer PC Case-
BLACK, Supports CrossfireX and 3-Way SLI</b></font><p><font face="Tahoma" size="2">The Dragon Lord K
series builds LanCools high standard of Quality requirement. This SECC
steel cases with completely tool-less design are the perfect complement
to a PC gamers needs. The look of Dragon Lord K58 has no door panel
design; users can access the external drive easier. The two red stripes
on the front panel done in attractive anodized aluminum give a
flamboyant finishing touch to this outstanding high-end chassis.</font></p></div>
</div>
<p><font face="Tahoma" size="2"><b>Features:</b></font></p>
<ul><li><font face="Tahoma" size="2">The hardware installation with Dragon Lord K56
is very easy and simple. The front panel is detachable and they can be removed
without tools.</font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">The Dragon Lord K56 is targeted for the LAN party gamers. It is a mid-tower
case, which is ideal for the latest graphics cards in combination with the best
thermal dynamics. Especially in the advent of adding in new graphics cards,
equipped with 8 PCI slots, can hold three or more graphics cards, supports
CrossfireX and 3-way SLI.</font></font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">The new internal layout has the motherboard on top of the power supply unit,
which allows for easier access to the motherboard as well as more room above,
thus larger CPU coolers can be used. The power supply unit at the button of the
case is cooled with fresh cool air directly from the outside of the case,
instead of pre-heated air from within. This will bring down the core
temperatures and extend the lifespan of the PSU significantly.</font></font></li><li>
<font face="Tahoma" size="2">To install motherboard require no tools, use tool-less screw to screw a
motherboard on case, easily and quickly.</font></li></ul><p><font face="Tahoma" size="2">
<b>Silent Performance:</b></font></p><ul><li><font face="Tahoma" size="2">
The new 5.25 bay tool-less mounting incorporates a mounting bar equipped with
rubber padding. After secure the mounting bar, the rubber pad pushes and holds
the 5.25 device in position to secure and absorb vibration from the device.</font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">The Power Supply has rubber pads for both insulation and support. The mounting
clip is also aligned with rubber to reduce vibrations but also and also secure
the PSU without scratching the painted surface.</font></font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">There are special air intake vents at the front of the case, allow cold air to
enter , also keep system noise inside the case.</font></font></li></ul>
<font face="Tahoma" size="2"><b>Creative Thermal Solutions:</b></font><ul><li><font face="Tahoma" size="2">
Dragon Lord K56 inputs cold air by the 120mm (1200RPM) intake fan, There are
also vents on the 5.25 bezels, allow cold air to enter the case to cool the
system down</font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">The rear 120mm exhaust fan just next to the CPU, it can remove the hot air out
fast and silently.</font></font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">There are vents on the PCI slots, provides extra cooling to graphics card.</font></font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">The power supply unit is at the bottom of the case. It can draw in cold air
directly through the vent below the power supply unit. This cooler, fresh air
will keep your PSU components more cool and stable and thus extend the PSU
lifecycle.</font></font></li><li><font face="Tahoma" size="2">Dragon Lord K56 supports liquid cooling system, the two holes at the rear of the
case allows water tubes to pass through, and the rubber cover can protect the
tubes away from cutting.</font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">The Dragon Load k56 feature a high density vent design, to make sure fans remove
the system hot air out of the case totally.</font></font></li></ul><p><font face="Tahoma" size="2">
<b>User Friendly:</b></font></p><ul><li><font face="Tahoma" size="2">2009 has seen an all-new tool-less design from Dragon Lord K series chassis. To
do this required a great many innovative patents to be filed worldwide. The
ideas will make installing and maintenance much easier. For example when
installing the 5.25 optical drive, just slide the drive into the 5.25 bay, and
close the mounting bar to secure the optical drive, as simple as that.</font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">Anti-vibration HDD cage, with anti-vibration kit and special HDD mounting rack.
User can easily install the HDD into the cage. And the rubber rings on the HDD,
absorb the vibration to stop the noise.</font></font></li><li><font size="2"><span style="font-family: Tahoma;"> </span><font face="Tahoma">To install PSU require no tools. Simply open the aluminum PSU holder, insert the
PSU in position, also can turn PSU's fans up or down to suit your need, then
close the aluminum PSU holder.</font></font></li><li><font face="Tahoma" size="2">The intake fans are aligned with inlet holes on the bezels. These are equipped
with air filters to stop the dust and keep the internals dust free and clean.</font></li></ul>
<p><font face="Tahoma" size="2"><b>Specifications:</b></font> </p><div align="left"><font face="Tahoma" color="#676767" size="2"><table width="658" cellspacing="0" cellpadding="3" border="1" bgcolor="#ffffff">
<tbody><tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Model</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">PC-K56 </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Case Type</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">Advance Mid Tower
</font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Dimensions
</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">210mm x 460mm x 490
mm (W, H, D) </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Front bezel
Material</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">Plastic </font>
</td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Color</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">Black </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Side Panel</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">CECC Steel </font>
</td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Body
Material</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">CECC Steel </font>
</td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Net Weight
</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">8.85kg </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>5.25 drive
bay (External)</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">5 </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>3.5 drive
bay (External)</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2"> </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>3.5 drive
bay (Internal)</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">4 </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Expansion
Slot</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">8 </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>Motherboard</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">ATX / M-ATX </font>
</td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>System Fan
(Front)</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">120mm Fan x 1
(1200RPM) </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>System Fan
(Top)</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2"> </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>System Fan
(Rear)</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">120mm Fan x 1
(1500RPM) </font></td>
</tr>
<tr height="27">
<td width="203" bgcolor="#ffffff"><font size="2"><strong>I/O Ports</strong></font></td>
<td width="440" bgcolor="#ffffff"><font size="2">USB2.0 x 2 /
HD+AC97 Audio </font></td>
</tr>
</tbody></table>
</font></div>
<br /><br />Lian-Li00https://www.performance-pcs.com/media/catalog/product/t/m/tmpk56b_main_02.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmpk56b_main_03.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmpk56b_main_04.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmpk56b_main_05.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmpk56b_main_06.jpg52.4900low-stockLian-Li