The Lian-Li PC-7FNB Advanced Mid Tower Case is a
full aluminum case with all of Lian Li's latest innovations in easy installation
and use. The I/O ports and control buttons are located on the top of the case,
making it optimal for floor placement. The chassis is ventilated using a huge
140 mm intake fan and a large 120 mm exhaust fan. Nearly everything involved
with installing components is tool-less, from the 5.25" drive bays and 3.5" HDDs
to the expansion cards and power supply. As always, Lian Li has also focused on
making this case as quiet as possible - low speed, low noise fans and vibration
reduction in nearly every capacity - from the side panels to the HDD mounts
themselves. Lian Li continues to innovate and excel in case design, the Lian-Li
PC-7FNB Advanced Mid Tower Case is another shining example!
Features:
The Ultimate Workmanship
"Quality" is always the essence of Lian
Li's products since 1998 when Lian Li offered the first all aluminum chassis
to the market. Since then, Lian Li exemplifies the same quality standards,
ensuring durability and craftsmanship come first. All products are
manufactured in Taiwan and distributed to worldwide markets.
Lian Li is famous for their aluminum
products. Aluminum is good for heat transfer, and after Lian LiÂ’s unique
surface treatments to ensure there are no shape edges which may cut userÂ’s
hands. The beauty of Lian Li is that everything within the case is
recyclable; thereby ensuring every Lian Li case is made from environmentally
friendly material.
The PC-7FN carries Lian LiÂ’s high standard
of Quality requirement. All the sharp edges have been removed for userÂ’s
safety. In addition, the external and internal surfaces have hair-line brush
anodized aluminum in keeping with Lian LiÂ’s classical style.
Excellent Design
The cutting edge tool-less design is an
important key feature in 2009 Lian Li cases. Lian Li designer considered end
user requirements, like those who need to build systems faster, or swap out
components often. The brand new tool-less modules can make Lian Li usersÂ’
life much more convenient.
The look of PC-7FN has no door panel
design; users can access the external drive easier. Attractive anodized
aluminum give a flamboyant finishing touch to this outstanding high-end
chassis.
Lian Li Fine Craftmanship Product
The new internal layout has the motherboard
on top of the power supply unit, which allows for easier access to the
motherboard as well as more room above, thus larger CPU coolers can be used.
The power supply unit at the button of the case is cooled with fresh cool
air directly from the outside of the case, instead of pre-heated air from
within. This will bring down the core temperatures and extend the lifespan
of the PSU significantly.
The new PC-7FN is a mid-tower case, which
is ideal for the latest graphics cards in combination with the best thermal
dynamics. Easily adjustable to optimize your hardware setup. Especially in
the advent of adding in new graphics cards, equipped with 8 PCI slots, can
hold three or more graphics cards, supports CrossfireX™ and 3-way SLI™.
Silent Performance
Lian Li uses the best “Made in Taiwan” high
quality aluminum panel for all Lian Li chassis. The solid main chassis was
folded with 1.5mm thick aluminum sheeting to make a more sturdy structure
which has less vibration. The removable front panels are joined with
specialized plastic kits that prevent the metal parts from touching each
other, ultimately reducing noise created by fans and HDD vibration.
The PC-7FN is equipped with large cooling
fans, with low RPM, which still provide enough air flow to cool down the
hardware adequately. The front 140mm intakes blue LED fan runs at
1000RPM.and the rear 120mm fan extracts the hot air out at 1200RPM.
Lian Li designers spent months to upgrade
Lian LiÂ’s HDD cage; the new HDD cage using special Thumb Screws with rubber
suspension. no tool required, simply secure the anti-vibration rubber ring
to the HDD, and slide the HDD into the cage. And there is a gate to secure
the HDDs
The new 5.25” bay tool-less mounting
incorporates a mounting bar equipped with rubber padding. After closing the
mounting bar, the rubber pad pushes and holds the 5.25” device in position
to both secure and absorb vibration from the device.
The Power Supply has rubber pads for both
insulation and support. Also secure the PSU without scratching the painted
surface.
Thermal Solution:
There is a 140mm intake blue LED fan on
PC-7FN, The fan can output high air flow volume with lower RPM to push the
cold air through the HDD rack.
The rear 120mm exhaust fan just next to the
CPU, it can remove the hot air out fast and silently.
There are vents on the PCI slots, provides
extra cooling to graphics card.
The power supply unit is at the bottom of
the case. It can draw in cold air directly through the vent below the power
supply unit. This cooler, fresh air will keep your PSU components more cool
and stable and thus extend the PSU lifecycle.
PC-7FN supports liquid cooling system, the
two holes at the rear of the case allows water tubes to pass through, and
the rubber cover can protect the tubes away from cutting.
User Friendly Design
2009 has seen an all-new tool-less design
from Lian Li aluminum chassis. To do this required a great many innovative
patents to be filed worldwide. The ideas will make installing and
maintenance much easier. For example when installing the 5.25” optical
drive, just slide the drive into the 5.25” bay, and close the mounting bar
to secure the optical drive, as simple as that.
The installation of the hard disk is very
easy, and tool-less. Place the hard disk into the aluminum cage, and close
the clip to secure the hard disk.(2.5" HDD install feasible), Slide the hard
disk within the cage into the special hard disk rack with the rubber
suspension grommet.
User can easily rotate the tool-less hard
disk cage to 90 degree for your space management.
The front intake fans has equipped air
filter, to stop dust entering the chassis. These air filter were washable,
environment friendly
Multi-media port connectors follow
international specification standards, with one connector for easy
installation.
USB port, Audio supports HD Audio or AC97
Audio. The dual design is for better compatibility options. All I/O ports on
the top, allow for easy access.
There is a special quadrate opening of
motherboard tray, user can easily switch the cpu's radiator without remove
motherboard.
Specifications:
Model
PC-7FNÂ
Case Type
Mid TowerÂ
DimensionsÂ
210mm x 470mm x 490mm ( W,
H, D)Â
Front bezel Material
AluminumÂ
Color
BlackÂ
Side Panel
AluminumÂ
Body Material
AluminumÂ
Net WeightÂ
5.47kgÂ
5.25" drive bay (External)
5( one for 3.5 inch
convertor)Â
3.5" drive bay (External)
3.5" drive bay (Internal)
4Â
Expansion Slot
8Â
Motherboard
ATX / M-ATXÂ
System Fan (Front)
14cm Blue LED Fan x 1
(@1000RPM)Â
System Fan (Top)
System Fan (Rear)
12cm Fan x 1 (@1500RPM)Â
I/O Ports
USB2.0 x 2 / HD+AC97 AudioÂ
A power supply is not included. To purchase a power supply please select from the list below. You can also make this case uniquely yours by using our custom case modification services. Just scroll to the bottom and choose from a variety of options.
The Lian-Li PC-7FNB Advanced Mid Tower Case is a
full aluminum case with all of Lian Li's latest innovations in easy installation
and use. The I/O ports and control buttons are located on the top of the case,
making it optimal for floor placement. The chassis is ventilated using a huge
140 mm intake fan and a large 120 mm exhaust fan. Nearly everything involved
with installing components is tool-less, from the 5.25" drive bays and 3.5" HDDs
to the expansion cards and power supply. As always, Lian Li has also focused on
making this case as quiet as possible - low speed, low noise fans and vibration
reduction in nearly every capacity - from the side panels to the HDD mounts
themselves. Lian Li continues to innovate and excel in case design, the Lian-Li
PC-7FNB Advanced Mid Tower Case is another shining example!
Features:
The Ultimate Workmanship
"Quality" is always the essence of Lian
Li's products since 1998 when Lian Li offered the first all aluminum chassis
to the market. Since then, Lian Li exemplifies the same quality standards,
ensuring durability and craftsmanship come first. All products are
manufactured in Taiwan and distributed to worldwide markets.
Lian Li is famous for their aluminum
products. Aluminum is good for heat transfer, and after Lian LiÂ’s unique
surface treatments to ensure there are no shape edges which may cut userÂ’s
hands. The beauty of Lian Li is that everything within the case is
recyclable; thereby ensuring every Lian Li case is made from environmentally
friendly material.
The PC-7FN carries Lian LiÂ’s high standard
of Quality requirement. All the sharp edges have been removed for userÂ’s
safety. In addition, the external and internal surfaces have hair-line brush
anodized aluminum in keeping with Lian LiÂ’s classical style.
Excellent Design
The cutting edge tool-less design is an
important key feature in 2009 Lian Li cases. Lian Li designer considered end
user requirements, like those who need to build systems faster, or swap out
components often. The brand new tool-less modules can make Lian Li usersÂ’
life much more convenient.
The look of PC-7FN has no door panel
design; users can access the external drive easier. Attractive anodized
aluminum give a flamboyant finishing touch to this outstanding high-end
chassis.
Lian Li Fine Craftmanship Product
The new internal layout has the motherboard
on top of the power supply unit, which allows for easier access to the
motherboard as well as more room above, thus larger CPU coolers can be used.
The power supply unit at the button of the case is cooled with fresh cool
air directly from the outside of the case, instead of pre-heated air from
within. This will bring down the core temperatures and extend the lifespan
of the PSU significantly.
The new PC-7FN is a mid-tower case, which
is ideal for the latest graphics cards in combination with the best thermal
dynamics. Easily adjustable to optimize your hardware setup. Especially in
the advent of adding in new graphics cards, equipped with 8 PCI slots, can
hold three or more graphics cards, supports CrossfireX™ and 3-way SLI™.
Silent Performance
Lian Li uses the best “Made in Taiwan” high
quality aluminum panel for all Lian Li chassis. The solid main chassis was
folded with 1.5mm thick aluminum sheeting to make a more sturdy structure
which has less vibration. The removable front panels are joined with
specialized plastic kits that prevent the metal parts from touching each
other, ultimately reducing noise created by fans and HDD vibration.
The PC-7FN is equipped with large cooling
fans, with low RPM, which still provide enough air flow to cool down the
hardware adequately. The front 140mm intakes blue LED fan runs at
1000RPM.and the rear 120mm fan extracts the hot air out at 1200RPM.
Lian Li designers spent months to upgrade
Lian LiÂ’s HDD cage; the new HDD cage using special Thumb Screws with rubber
suspension. no tool required, simply secure the anti-vibration rubber ring
to the HDD, and slide the HDD into the cage. And there is a gate to secure
the HDDs
The new 5.25” bay tool-less mounting
incorporates a mounting bar equipped with rubber padding. After closing the
mounting bar, the rubber pad pushes and holds the 5.25” device in position
to both secure and absorb vibration from the device.
The Power Supply has rubber pads for both
insulation and support. Also secure the PSU without scratching the painted
surface.
Thermal Solution:
There is a 140mm intake blue LED fan on
PC-7FN, The fan can output high air flow volume with lower RPM to push the
cold air through the HDD rack.
The rear 120mm exhaust fan just next to the
CPU, it can remove the hot air out fast and silently.
There are vents on the PCI slots, provides
extra cooling to graphics card.
The power supply unit is at the bottom of
the case. It can draw in cold air directly through the vent below the power
supply unit. This cooler, fresh air will keep your PSU components more cool
and stable and thus extend the PSU lifecycle.
PC-7FN supports liquid cooling system, the
two holes at the rear of the case allows water tubes to pass through, and
the rubber cover can protect the tubes away from cutting.
User Friendly Design
2009 has seen an all-new tool-less design
from Lian Li aluminum chassis. To do this required a great many innovative
patents to be filed worldwide. The ideas will make installing and
maintenance much easier. For example when installing the 5.25” optical
drive, just slide the drive into the 5.25” bay, and close the mounting bar
to secure the optical drive, as simple as that.
The installation of the hard disk is very
easy, and tool-less. Place the hard disk into the aluminum cage, and close
the clip to secure the hard disk.(2.5" HDD install feasible), Slide the hard
disk within the cage into the special hard disk rack with the rubber
suspension grommet.
User can easily rotate the tool-less hard
disk cage to 90 degree for your space management.
The front intake fans has equipped air
filter, to stop dust entering the chassis. These air filter were washable,
environment friendly
Multi-media port connectors follow
international specification standards, with one connector for easy
installation.
USB port, Audio supports HD Audio or AC97
Audio. The dual design is for better compatibility options. All I/O ports on
the top, allow for easy access.
There is a special quadrate opening of
motherboard tray, user can easily switch the cpu's radiator without remove
motherboard.
Specifications:
Model
PC-7FNÂ
Case Type
Mid TowerÂ
DimensionsÂ
210mm x 470mm x 490mm ( W,
H, D)Â
Front bezel Material
AluminumÂ
Color
BlackÂ
Side Panel
AluminumÂ
Body Material
AluminumÂ
Net WeightÂ
5.47kgÂ
5.25" drive bay (External)
5( one for 3.5 inch
convertor)Â
3.5" drive bay (External)
3.5" drive bay (Internal)
4Â
Expansion Slot
8Â
Motherboard
ATX / M-ATXÂ
System Fan (Front)
14cm Blue LED Fan x 1
(@1000RPM)Â
System Fan (Top)
System Fan (Rear)
12cm Fan x 1 (@1500RPM)Â
I/O Ports
USB2.0 x 2 / HD+AC97 AudioÂ
A power supply is not included. To purchase a power supply please select from the list below. You can also make this case uniquely yours by using our custom case modification services. Just scroll to the bottom and choose from a variety of options.
Configure Lian Li PC-7FW Aluminum Super Mid Tower Computer PC Case - Black
OR
product
https://www.performance-pcs.com/lian-li-pc-7fnb-aluminum-super-mid-tower-computer-pc-case-black-pc-7fnb.html5988Lian Li PC-7FW Aluminum Super Mid Tower Computer PC Case - Blackhttps://www.performance-pcs.com/media/catalog/product/t/m/tmppc-60fnb_01.jpg134.95134.9500USDOutOfStock/Chassis/Midtower Chassis<h3><font face="Tahoma, Arial, Helvetica, sans-serif">Product Details:</font></h3><p><font face="Tahoma" size="2">The Lian-Li PC-7FNB Advanced Mid Tower Case is a
full aluminum case with all of Lian Li's latest innovations in easy installation
and use. The I/O ports and control buttons are located on the top of the case,
making it optimal for floor placement. The chassis is ventilated using a huge
140 mm intake fan and a large 120 mm exhaust fan. Nearly everything involved
with installing components is tool-less, from the 5.25" drive bays and 3.5" HDDs
to the expansion cards and power supply. As always, Lian Li has also focused on
making this case as quiet as possible - low speed, low noise fans and vibration
reduction in nearly every capacity - from the side panels to the HDD mounts
themselves. Lian Li continues to innovate and excel in case design, the Lian-Li
PC-7FNB Advanced Mid Tower Case is another shining example!</font></p>
<p><font face="Tahoma" size="2"><b>Features:</b></font></p>
<font face="Tahoma" size="2"><b>The Ultimate Workmanship</b></font><ul><li><font face="Tahoma" size="2">"Quality" is always the essence of Lian
Li's products since 1998 when Lian Li offered the first all aluminum chassis
to the market. Since then, Lian Li exemplifies the same quality standards,
ensuring durability and craftsmanship come first. All products are
manufactured in Taiwan and distributed to worldwide markets.</font></li><li><font face="Tahoma" size="2">Lian Li is famous for their aluminum
products. Aluminum is good for heat transfer, and after Lian LiÂ’s unique
surface treatments to ensure there are no shape edges which may cut userÂ’s
hands. The beauty of Lian Li is that everything within the case is
recyclable; thereby ensuring every Lian Li case is made from environmentally
friendly material.</font></li><li><font face="Tahoma" size="2">The PC-7FN carries Lian LiÂ’s high standard
of Quality requirement. All the sharp edges have been removed for userÂ’s
safety. In addition, the external and internal surfaces have hair-line brush
anodized aluminum in keeping with Lian LiÂ’s classical style.</font></li></ul>
<font face="Tahoma" size="2"><b>Excellent Design</b></font><ul><li><font face="Tahoma" size="2">The cutting edge tool-less design is an
important key feature in 2009 Lian Li cases. Lian Li designer considered end
user requirements, like those who need to build systems faster, or swap out
components often. The brand new tool-less modules can make Lian Li usersÂ’
life much more convenient.</font></li><li><font face="Tahoma" size="2">The look of PC-7FN has no door panel
design; users can access the external drive easier. Attractive anodized
aluminum give a flamboyant finishing touch to this outstanding high-end
chassis.</font></li></ul>
<font face="Tahoma" size="2"><b>Lian Li Fine Craftmanship Product</b></font><ul><li><font face="Tahoma" size="2">The new internal layout has the motherboard
on top of the power supply unit, which allows for easier access to the
motherboard as well as more room above, thus larger CPU coolers can be used.
The power supply unit at the button of the case is cooled with fresh cool
air directly from the outside of the case, instead of pre-heated air from
within. This will bring down the core temperatures and extend the lifespan
of the PSU significantly.</font></li><li><font face="Tahoma" size="2">The new PC-7FN is a mid-tower case, which
is ideal for the latest graphics cards in combination with the best thermal
dynamics. Easily adjustable to optimize your hardware setup. Especially in
the advent of adding in new graphics cards, equipped with 8 PCI slots, can
hold three or more graphics cards, supports CrossfireX™ and 3-way SLI™.</font></li></ul>
<font face="Tahoma" size="2"><b>Silent Performance</b></font><ul><li><font face="Tahoma" size="2">Lian Li uses the best “Made in Taiwan” high
quality aluminum panel for all Lian Li chassis. The solid main chassis was
folded with 1.5mm thick aluminum sheeting to make a more sturdy structure
which has less vibration. The removable front panels are joined with
specialized plastic kits that prevent the metal parts from touching each
other, ultimately reducing noise created by fans and HDD vibration.</font></li><li><font face="Tahoma" size="2">The PC-7FN is equipped with large cooling
fans, with low RPM, which still provide enough air flow to cool down the
hardware adequately. The front 140mm intakes blue LED fan runs at
1000RPM.and the rear 120mm fan extracts the hot air out at 1200RPM.</font></li><li><font face="Tahoma" size="2">Lian Li designers spent months to upgrade
Lian LiÂ’s HDD cage; the new HDD cage using special Thumb Screws with rubber
suspension. no tool required, simply secure the anti-vibration rubber ring
to the HDD, and slide the HDD into the cage. And there is a gate to secure
the HDDs</font></li><li><font face="Tahoma" size="2">The new 5.25” bay tool-less mounting
incorporates a mounting bar equipped with rubber padding. After closing the
mounting bar, the rubber pad pushes and holds the 5.25” device in position
to both secure and absorb vibration from the device. </font></li><li><font face="Tahoma" size="2">The Power Supply has rubber pads for both
insulation and support. Also secure the PSU without scratching the painted
surface.</font></li></ul>
<font face="Tahoma" size="2"><b>Thermal Solution</b>:</font><ul><li><font face="Tahoma" size="2">There is a 140mm intake blue LED fan on
PC-7FN, The fan can output high air flow volume with lower RPM to push the
cold air through the HDD rack.</font></li><li><font face="Tahoma" size="2">The rear 120mm exhaust fan just next to the
CPU, it can remove the hot air out fast and silently.</font></li><li><font face="Tahoma" size="2">There are vents on the PCI slots, provides
extra cooling to graphics card.</font></li><li><font face="Tahoma" size="2">The power supply unit is at the bottom of
the case. It can draw in cold air directly through the vent below the power
supply unit. This cooler, fresh air will keep your PSU components more cool
and stable and thus extend the PSU lifecycle.</font></li><li><font face="Tahoma" size="2">PC-7FN supports liquid cooling system, the
two holes at the rear of the case allows water tubes to pass through, and
the rubber cover can protect the tubes away from cutting.</font></li></ul>
<font face="Tahoma" size="2"><b>User Friendly Design</b></font><ul><li><font face="Tahoma" size="2">2009 has seen an all-new tool-less design
from Lian Li aluminum chassis. To do this required a great many innovative
patents to be filed worldwide. The ideas will make installing and
maintenance much easier. For example when installing the 5.25” optical
drive, just slide the drive into the 5.25” bay, and close the mounting bar
to secure the optical drive, as simple as that. </font></li><li><font face="Tahoma" size="2">The installation of the hard disk is very
easy, and tool-less. Place the hard disk into the aluminum cage, and close
the clip to secure the hard disk.(2.5" HDD install feasible), Slide the hard
disk within the cage into the special hard disk rack with the rubber
suspension grommet.</font></li><li><font face="Tahoma" size="2">User can easily rotate the tool-less hard
disk cage to 90 degree for your space management.</font></li><li><font face="Tahoma" size="2">The front intake fans has equipped air
filter, to stop dust entering the chassis. These air filter were washable,
environment friendly</font></li><li><font face="Tahoma" size="2">Multi-media port connectors follow
international specification standards, with one connector for easy
installation.</font></li><li><font face="Tahoma" size="2">USB port, Audio supports HD Audio or AC97
Audio. The dual design is for better compatibility options. All I/O ports on
the top, allow for easy access.</font></li><li><font face="Tahoma" size="2">There is a special quadrate opening of
motherboard tray, user can easily switch the cpu's radiator without remove
motherboard.</font></li></ul>
<p><font face="Tahoma" size="2"><b>Specifications:</b></font></p>
<table cellspacing="0" cellpadding="3" border="1">
<colgroup>
<col width="131" /><col width="719" />
</colgroup>
<tbody><tr height="27">
<td width="212"><font face="Tahoma" size="2">Model</font></td>
<td width="719"><font face="Tahoma" size="2">PC-7FNÂ </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">Case Type</font></td>
<td width="719"><font face="Tahoma" size="2">Mid Tower </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">Dimensions </font></td>
<td width="719"><font face="Tahoma" size="2">210mm x 470mm x 490mm ( W,
H, D)Â </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">Front bezel Material</font></td>
<td width="719"><font face="Tahoma" size="2">Aluminum </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">Color</font></td>
<td width="719"><font face="Tahoma" size="2">Black </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">Side Panel</font></td>
<td width="719"><font face="Tahoma" size="2">Aluminum </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">Body Material</font></td>
<td width="719"><font face="Tahoma" size="2">Aluminum </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">Net Weight </font></td>
<td width="719"><font face="Tahoma" size="2">5.47kg </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">5.25" drive bay (External)</font></td>
<td width="719"><font face="Tahoma" size="2">5( one for 3.5 inch
convertor)Â </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">3.5" drive bay (External)</font></td>
<td width="719"><font face="Tahoma" size="2"> </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">3.5" drive bay (Internal)</font></td>
<td width="719"><font face="Tahoma" size="2">4Â </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">Expansion Slot</font></td>
<td width="719"><font face="Tahoma" size="2">8Â </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">Motherboard</font></td>
<td width="719"><font face="Tahoma" size="2">ATX / M-ATXÂ </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">System Fan (Front)</font></td>
<td width="719"><font face="Tahoma" size="2">14cm Blue LED Fan x 1
(@1000RPM)Â </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">System Fan (Top)</font></td>
<td width="719"><font face="Tahoma" size="2"> </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">System Fan (Rear)</font></td>
<td width="719"><font face="Tahoma" size="2">12cm Fan x 1 (@1500RPM)Â </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">I/O Ports</font></td>
<td width="719"><font face="Tahoma" size="2">USB2.0 x 2 / HD+AC97 Audio </font></td>
</tr>
</tbody></table>
<font size="2"><span style="font-weight: bold;"><br />A power supply is not included. To purchase a power supply please select from the list below. You can also make this case uniquely yours by using our custom case modification services. Just scroll to the bottom and choose from a variety of options.</span></font><div><b><font face="Tahoma, Arial, Helvetica, sans-serif"><b><font size="2"><font face="tahoma,arial,helvetica,sans-serif"></font></font></b></font></b><p /></div> <h3><font face="Tahoma, Arial, Helvetica, sans-serif">Product Details:</font></h3><p><font face="Tahoma" size="2">The Lian-Li PC-7FNB Advanced Mid Tower Case is a
full aluminum case with all of Lian Li's latest innovations in easy installation
and use. The I/O ports and control buttons are located on the top of the case,
making it optimal for floor placement. The chassis is ventilated using a huge
140 mm intake fan and a large 120 mm exhaust fan. Nearly everything involved
with installing components is tool-less, from the 5.25" drive bays and 3.5" HDDs
to the expansion cards and power supply. As always, Lian Li has also focused on
making this case as quiet as possible - low speed, low noise fans and vibration
reduction in nearly every capacity - from the side panels to the HDD mounts
themselves. Lian Li continues to innovate and excel in case design, the Lian-Li
PC-7FNB Advanced Mid Tower Case is another shining example!</font></p>
<p><font face="Tahoma" size="2"><b>Features:</b></font></p>
<font face="Tahoma" size="2"><b>The Ultimate Workmanship</b></font><ul><li><font face="Tahoma" size="2">"Quality" is always the essence of Lian
Li's products since 1998 when Lian Li offered the first all aluminum chassis
to the market. Since then, Lian Li exemplifies the same quality standards,
ensuring durability and craftsmanship come first. All products are
manufactured in Taiwan and distributed to worldwide markets.</font></li><li><font face="Tahoma" size="2">Lian Li is famous for their aluminum
products. Aluminum is good for heat transfer, and after Lian LiÂ’s unique
surface treatments to ensure there are no shape edges which may cut userÂ’s
hands. The beauty of Lian Li is that everything within the case is
recyclable; thereby ensuring every Lian Li case is made from environmentally
friendly material.</font></li><li><font face="Tahoma" size="2">The PC-7FN carries Lian LiÂ’s high standard
of Quality requirement. All the sharp edges have been removed for userÂ’s
safety. In addition, the external and internal surfaces have hair-line brush
anodized aluminum in keeping with Lian LiÂ’s classical style.</font></li></ul>
<font face="Tahoma" size="2"><b>Excellent Design</b></font><ul><li><font face="Tahoma" size="2">The cutting edge tool-less design is an
important key feature in 2009 Lian Li cases. Lian Li designer considered end
user requirements, like those who need to build systems faster, or swap out
components often. The brand new tool-less modules can make Lian Li usersÂ’
life much more convenient.</font></li><li><font face="Tahoma" size="2">The look of PC-7FN has no door panel
design; users can access the external drive easier. Attractive anodized
aluminum give a flamboyant finishing touch to this outstanding high-end
chassis.</font></li></ul>
<font face="Tahoma" size="2"><b>Lian Li Fine Craftmanship Product</b></font><ul><li><font face="Tahoma" size="2">The new internal layout has the motherboard
on top of the power supply unit, which allows for easier access to the
motherboard as well as more room above, thus larger CPU coolers can be used.
The power supply unit at the button of the case is cooled with fresh cool
air directly from the outside of the case, instead of pre-heated air from
within. This will bring down the core temperatures and extend the lifespan
of the PSU significantly.</font></li><li><font face="Tahoma" size="2">The new PC-7FN is a mid-tower case, which
is ideal for the latest graphics cards in combination with the best thermal
dynamics. Easily adjustable to optimize your hardware setup. Especially in
the advent of adding in new graphics cards, equipped with 8 PCI slots, can
hold three or more graphics cards, supports CrossfireX™ and 3-way SLI™.</font></li></ul>
<font face="Tahoma" size="2"><b>Silent Performance</b></font><ul><li><font face="Tahoma" size="2">Lian Li uses the best “Made in Taiwan” high
quality aluminum panel for all Lian Li chassis. The solid main chassis was
folded with 1.5mm thick aluminum sheeting to make a more sturdy structure
which has less vibration. The removable front panels are joined with
specialized plastic kits that prevent the metal parts from touching each
other, ultimately reducing noise created by fans and HDD vibration.</font></li><li><font face="Tahoma" size="2">The PC-7FN is equipped with large cooling
fans, with low RPM, which still provide enough air flow to cool down the
hardware adequately. The front 140mm intakes blue LED fan runs at
1000RPM.and the rear 120mm fan extracts the hot air out at 1200RPM.</font></li><li><font face="Tahoma" size="2">Lian Li designers spent months to upgrade
Lian LiÂ’s HDD cage; the new HDD cage using special Thumb Screws with rubber
suspension. no tool required, simply secure the anti-vibration rubber ring
to the HDD, and slide the HDD into the cage. And there is a gate to secure
the HDDs</font></li><li><font face="Tahoma" size="2">The new 5.25” bay tool-less mounting
incorporates a mounting bar equipped with rubber padding. After closing the
mounting bar, the rubber pad pushes and holds the 5.25” device in position
to both secure and absorb vibration from the device. </font></li><li><font face="Tahoma" size="2">The Power Supply has rubber pads for both
insulation and support. Also secure the PSU without scratching the painted
surface.</font></li></ul>
<font face="Tahoma" size="2"><b>Thermal Solution</b>:</font><ul><li><font face="Tahoma" size="2">There is a 140mm intake blue LED fan on
PC-7FN, The fan can output high air flow volume with lower RPM to push the
cold air through the HDD rack.</font></li><li><font face="Tahoma" size="2">The rear 120mm exhaust fan just next to the
CPU, it can remove the hot air out fast and silently.</font></li><li><font face="Tahoma" size="2">There are vents on the PCI slots, provides
extra cooling to graphics card.</font></li><li><font face="Tahoma" size="2">The power supply unit is at the bottom of
the case. It can draw in cold air directly through the vent below the power
supply unit. This cooler, fresh air will keep your PSU components more cool
and stable and thus extend the PSU lifecycle.</font></li><li><font face="Tahoma" size="2">PC-7FN supports liquid cooling system, the
two holes at the rear of the case allows water tubes to pass through, and
the rubber cover can protect the tubes away from cutting.</font></li></ul>
<font face="Tahoma" size="2"><b>User Friendly Design</b></font><ul><li><font face="Tahoma" size="2">2009 has seen an all-new tool-less design
from Lian Li aluminum chassis. To do this required a great many innovative
patents to be filed worldwide. The ideas will make installing and
maintenance much easier. For example when installing the 5.25” optical
drive, just slide the drive into the 5.25” bay, and close the mounting bar
to secure the optical drive, as simple as that. </font></li><li><font face="Tahoma" size="2">The installation of the hard disk is very
easy, and tool-less. Place the hard disk into the aluminum cage, and close
the clip to secure the hard disk.(2.5" HDD install feasible), Slide the hard
disk within the cage into the special hard disk rack with the rubber
suspension grommet.</font></li><li><font face="Tahoma" size="2">User can easily rotate the tool-less hard
disk cage to 90 degree for your space management.</font></li><li><font face="Tahoma" size="2">The front intake fans has equipped air
filter, to stop dust entering the chassis. These air filter were washable,
environment friendly</font></li><li><font face="Tahoma" size="2">Multi-media port connectors follow
international specification standards, with one connector for easy
installation.</font></li><li><font face="Tahoma" size="2">USB port, Audio supports HD Audio or AC97
Audio. The dual design is for better compatibility options. All I/O ports on
the top, allow for easy access.</font></li><li><font face="Tahoma" size="2">There is a special quadrate opening of
motherboard tray, user can easily switch the cpu's radiator without remove
motherboard.</font></li></ul>
<p><font face="Tahoma" size="2"><b>Specifications:</b></font></p>
<table cellspacing="0" cellpadding="3" border="1">
<colgroup>
<col width="131" /><col width="719" />
</colgroup>
<tbody><tr height="27">
<td width="212"><font face="Tahoma" size="2">Model</font></td>
<td width="719"><font face="Tahoma" size="2">PC-7FNÂ </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">Case Type</font></td>
<td width="719"><font face="Tahoma" size="2">Mid Tower </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">Dimensions </font></td>
<td width="719"><font face="Tahoma" size="2">210mm x 470mm x 490mm ( W,
H, D)Â </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">Front bezel Material</font></td>
<td width="719"><font face="Tahoma" size="2">Aluminum </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">Color</font></td>
<td width="719"><font face="Tahoma" size="2">Black </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">Side Panel</font></td>
<td width="719"><font face="Tahoma" size="2">Aluminum </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">Body Material</font></td>
<td width="719"><font face="Tahoma" size="2">Aluminum </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">Net Weight </font></td>
<td width="719"><font face="Tahoma" size="2">5.47kg </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">5.25" drive bay (External)</font></td>
<td width="719"><font face="Tahoma" size="2">5( one for 3.5 inch
convertor)Â </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">3.5" drive bay (External)</font></td>
<td width="719"><font face="Tahoma" size="2"> </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">3.5" drive bay (Internal)</font></td>
<td width="719"><font face="Tahoma" size="2">4Â </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">Expansion Slot</font></td>
<td width="719"><font face="Tahoma" size="2">8Â </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">Motherboard</font></td>
<td width="719"><font face="Tahoma" size="2">ATX / M-ATXÂ </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">System Fan (Front)</font></td>
<td width="719"><font face="Tahoma" size="2">14cm Blue LED Fan x 1
(@1000RPM)Â </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">System Fan (Top)</font></td>
<td width="719"><font face="Tahoma" size="2"> </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">System Fan (Rear)</font></td>
<td width="719"><font face="Tahoma" size="2">12cm Fan x 1 (@1500RPM)Â </font></td>
</tr>
<tr height="27">
<td width="212"><font face="Tahoma" size="2">I/O Ports</font></td>
<td width="719"><font face="Tahoma" size="2">USB2.0 x 2 / HD+AC97 Audio </font></td>
</tr>
</tbody></table>
<font size="2"><span style="font-weight: bold;"><br />A power supply is not included. To purchase a power supply please select from the list below. You can also make this case uniquely yours by using our custom case modification services. Just scroll to the bottom and choose from a variety of options.</span></font><div><b><font face="Tahoma, Arial, Helvetica, sans-serif"><b><font size="2"><font face="tahoma,arial,helvetica,sans-serif"></font></font></b></font></b><p /></div>Lian-Li00https://www.performance-pcs.com/media/catalog/product/t/m/tmppc-60fnb_02.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmppc-60fnb_03.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmppc-60fnb_04.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmppc-60fnb_05.jpghttps://www.performance-pcs.com/media/catalog/product/t/m/tmppc-60fnb_06.jpg94.4700low-stockLian-Li