Thermaltake Lumi Color 256C RGB Magnetic LED Strip Control Pack

Magnetic LED Strips

Six powerful high-grade neodymium magnets are embedded in the LED strips, and can be easily attached and removed from any metal surface. In addition to applying on to the chassis, the magnetic LED strips can also attach to power supply covers, radiator shrouds, or open frame system. On top of that, the Lumi Color 256C comes with top quality 3MTM adhesive back stickers for non-metal surfaces.

*Embedded magnets in the LED strips

Customized Lighting Effects

Press the “CUSTOMIZE” button to start the 256-colors mode, LED colors will automatically change in order. Press again to memorize and lock the color currently displayed color.

 *Indicator shows red.

7 Single-Color Flashing Mode

Press the “MODE” button to switch between the 7 LED colors (blue -> green -> red -> white -> orange -> yellow -> purple). Press and hold for 3 seconds to turn the flash mode on/off.

3 Adjustable Brightness Levels

Press the “BRIGHTNESS” button to adjust the brightness of the LED strips between three levels. Press and hold the button for 3 seconds to switch the LED lights on/off.

Vivid Presentation

Brighten up any build with 12 high density LEDs on each strip to illuminate even the darkest of areas to bring your build to life. Each LED strip can be connected to the control pack or daisy chanined together to allow flexibiliy when routing. Waterproofing and thicker LED strips prevent breakage during installation and long life with less risk of damage.

Magnetic LED Strips

Six powerful high-grade neodymium magnets are embedded in the LED strips, and can be easily attached and removed from any metal surface. In addition to applying on to the chassis, the magnetic LED strips can also attach to power supply covers, radiator shrouds, or open frame system. On top of that, the Lumi Color 256C comes with top quality 3MTM adhesive back stickers for non-metal surfaces.

*Embedded magnets in the LED strips

Customized Lighting Effects

Press the “CUSTOMIZE” button to start the 256-colors mode, LED colors will automatically change in order. Press again to memorize and lock the color currently displayed color.

*Indicator shows red.

7 Single-Color Flashing Mode

Press the “MODE” button to switch between the 7 LED colors (blue -> green -> red -> white -> orange -> yellow -> purple). Press and hold for 3 seconds to turn the flash mode on/off.

3 Adjustable Brightness Levels

Press the “BRIGHTNESS” button to adjust the brightness of the LED strips between three levels. Press and hold the button for 3 seconds to switch the LED lights on/off.

Vivid Presentation

Brighten up any build with 12 high density LEDs on each strip to illuminate even the darkest of areas to bring your build to life. Each LED strip can be connected to the control pack or daisy chanined together to allow flexibiliy when routing. Waterproofing and thicker LED strips prevent breakage during installation and long life with less risk of damage.