Needed to add some bling to your case? This chrome bezel is for standard 10mm size round LEDs. The bezel requires a single hole 13.2mm diameter and is secured by a nut and lock-washer. The bezel has a removable PVC grommet at the rear which has two holes to take the twin leads of the LED. The grommet is then pushed down onto the base of the LED before soldering, and the assembly pressed into the body of the bezel until the flange of the LED is hard against the internal step with the grommet flush. The bezel is 15.8mm diameter and 13mm deep. Total length 19mm.
Needed to add some bling to your case? This chrome bezel is for standard 10mm size round LEDs. The bezel requires a single hole 13.2mm diameter and is secured by a nut and lock-washer. The bezel has a removable PVC grommet at the rear which has two holes to take the twin leads of the LED. The grommet is then pushed down onto the base of the LED before soldering, and the assembly pressed into the body of the bezel until the flange of the LED is hard against the internal step with the grommet flush. The bezel is 15.8mm diameter and 13mm deep. Total length 19mm.
https://www.performance-pcs.com/mod-smart-chrome-abs-led-holder-10mm-led-10h-c-d.html27329Mod/Smart Chrome ABS LED Holder - 10mmhttps://www.performance-pcs.com/media/catalog/product/l/e/led-10h-c_01.jpg0.40.4000USDInStock/Lighting/Bulbs, Inverters & Accessories<p>Needed to add some bling to your case? This chrome bezel is for standard 10mm size round LEDs. The bezel requires a single hole 13.2mm diameter and is secured by a nut and lock-washer. The bezel has a removable PVC grommet at the rear which has two holes to take the twin leads of the LED. The grommet is then pushed down onto the base of the LED before soldering, and the assembly pressed into the body of the bezel until the flange of the LED is hard against the internal step with the grommet flush. The bezel is 15.8mm diameter and 13mm deep. Total length 19mm.</p> <p>Needed to add some bling to your case? This chrome bezel is for standard 10mm size round LEDs. The bezel requires a single hole 13.2mm diameter and is secured by a nut and lock-washer. The bezel has a removable PVC grommet at the rear which has two holes to take the twin leads of the LED. The grommet is then pushed down onto the base of the LED before soldering, and the assembly pressed into the body of the bezel until the flange of the LED is hard against the internal step with the grommet flush. The bezel is 15.8mm diameter and 13mm deep. Total length 19mm.</p>Mod/Smart000.2000add-to-cartMod/SmartLED Bulb10mm
Good Stock 20 left
Download PDF 
