Needed to add some bling to your case? This chrome bezel is for standard 3mm size round LEDs. The bezel requires a single hole 5.7mm diameter and is secured by a nut and lock-washer. The bezel has a removable PVC grommet at the rear which has two holes to take the twin leads of the LED. The grommet is then pushed down onto the base of the LED before soldering, and the assembly pressed into the body of the bezel until the flange of the LED is hard against the internal step with the grommet flush. The bezel is 7.6mm diameter and 8mm deep. Total length 11.9mm.
Needed to add some bling to your case? This chrome bezel is for standard 3mm size round LEDs. The bezel requires a single hole 5.7mm diameter and is secured by a nut and lock-washer. The bezel has a removable PVC grommet at the rear which has two holes to take the twin leads of the LED. The grommet is then pushed down onto the base of the LED before soldering, and the assembly pressed into the body of the bezel until the flange of the LED is hard against the internal step with the grommet flush. The bezel is 7.6mm diameter and 8mm deep. Total length 11.9mm.
https://www.performance-pcs.com/mod-smart-chrome-abs-led-holder-3mm-led-3h-c-d.html27326Mod/Smart Chrome ABS LED Holder - 3mmhttps://www.performance-pcs.com/media/catalog/product/l/e/led-3h-c_01.jpg0.250.2500USDInStock/Lighting/Bulbs, Inverters & Accessories<p>Needed to add some bling to your case? This chrome bezel is for standard 3mm size round LEDs. The bezel requires a single hole 5.7mm diameter and is secured by a nut and lock-washer. The bezel has a removable PVC grommet at the rear which has two holes to take the twin leads of the LED. The grommet is then pushed down onto the base of the LED before soldering, and the assembly pressed into the body of the bezel until the flange of the LED is hard against the internal step with the grommet flush. The bezel is 7.6mm diameter and 8mm deep. Total length 11.9mm.</p> <p>Needed to add some bling to your case? This chrome bezel is for standard 3mm size round LEDs. The bezel requires a single hole 5.7mm diameter and is secured by a nut and lock-washer. The bezel has a removable PVC grommet at the rear which has two holes to take the twin leads of the LED. The grommet is then pushed down onto the base of the LED before soldering, and the assembly pressed into the body of the bezel until the flange of the LED is hard against the internal step with the grommet flush. The bezel is 7.6mm diameter and 8mm deep. Total length 11.9mm.</p>Mod/Smart000.1000add-to-cartMod/SmartLED Bulb3mm
Good Stock 25 left
Download PDF 
