The NEW Monster fan you true modder's have all been waiting for! Performance-PCs.com designs a fan for you that is the optimal side panel intake fan. We beefed up the RPM's a bit to maximize the CFM to over 100 while still keeping the noise level down below 25 dB.
The NEW Monster fan you true modder's have all been waiting for! Performance-PCs.com designs a fan for you that is the optimal side panel intake fan. We beefed up the RPM's a bit to maximize the CFM to over 100 while still keeping the noise level down below 25 dB. This fan we made with no LED's for those not into the bling and bright lights. This fan is meant for use for hard core modder's that are capable of cutting their own large side panel holes for installation. Fan includes a pretty black trim ring bezel for hiding your cut and a sleek looking black plastic filter to keep fingers out of the fan. For those with Silver cases we can paint the trim ring metallic silver using the options below. So what are you waiting for? Grab these fans and get modding your case for optimal air cooling!
- 360mm DC Cooling Fan (Including bezel) for PC Case
- 13 Clear Fan Blade with optimal pitch for CFM
- Plastic Fan Grill/Bezel
- Black External Trim Ring (Silver Optional)
- Quiet Operation
- Do It Yourself (DIY)
- Mounting Dimensions: 298mm x 298mm (fan frame itself) - 347mm x 347mm (with shroud); mount-hole to mount-hole diagonally: 325mm
Color
|
Clear Fan with Black bezel (Silver Optional)
|
Fan Dimension
|
298 x 298 x 30 mm
|
Rated Voltage
|
DC 12V (4.5V Start-up Voltage)
|
Wattage
|
6 Watts
|
Amperage
|
0.5A
|
Fan Speed
|
600RPM ±5%
|
Airflow
|
126.7 CFM ±5%
|
Noise
|
21.7 dBA
|
Connector
|
4 Pin Molex connector w/ pass-through
|