Alphacool ES Laing DDC310 Pump - Single black plastic bottom

Compact and powerful.
The flat design of the Laing DDC310 pump saves space and fits with the corresponding Enterprise reservoirs from chassis as small as  a 1U server rack. This results in a very powerful pump that can be used in the smallest of spaces. The DDC310 variant offers with a delivery height of 2.44m enough power to operate an extensive water loop. The performance is enough to operate a dual or quad socket system including reservoir and radiators. The performance of the pump is also sufficient to operate a render server with up to 4 graphics cards.

Spherical Ceramic Bearing
The pump uses a shaftless ball motor or spherical bearing. The motor is driven by magnets while the rotor is mounted on a ball-ceramic bearing. This makes the pump maintenance-free, as the bearing is self-adjusting and maintenance-free. The pump is lubricated by the coolant during operation. This makes the Alphacool ES Solution Laing DDC310 pump a so-called wet rotor pump. Due to its design, even small particles of dirt are no problem for the pump.

Installation and Commissioning
The pump is delivered with a classic plastic bottom which ensures a high compatibility to all Enterprise Solution products. However, the pump can also be mounted on all existing DDC pump tops from Alphacool. The pump comes with a corresponding O-ring, only the mounting screws must be used from the respective reservoir, as these may differ in length. The power is supplied via a 4-pin Molex connector, the speed can be read out via a 3-pin Molex connector. This is usually done via the 3-pin fan connector on the mainboard or via an appropriate fan controller.

Color:	black
Power connector:	4Pin Molex
Max. Flow:	200l/h, Standard (smaller than 500l/h)
Max. Discharge head:	2,44m, Good (2 to 4m)
Power input:	10W
Water outlet:	Not available
Water inlet:	Not available
Material:	Hartcoal, Brass, Aluminiumoxid
Voltage:	12V DC
Max. System temperature:	60° C
Approved fluids:	Water, Water/ glycol mixture
Manufacturer:	Alphacool
Dimensions:	62 x 62 x 28 mm

Technical data:

• L x W x H: 62 x 62 x 28 mm


• Weight: 167 g


• Material: Stainless steel, EPDM, Ceramics


• Voltage range: 8 - 13,2 V


• Starting voltage: 9 V


• Voltage: 12 V DC


• Power consumption: 10W


• Max delivery height: 2,44m


• Max flow rate: 200 l/h


• Power connector: 4-Pin Molex


• Speedometer signal: 3-Pin Molex


• Max working temperature: 60° C

Scope of delivery:

• 1 pcs DDC310 Pump


• 1 pcs O-ring


• Plastic bottom