OKgear 3.5" Hard Drive Enclosure, USB 2.0 & eSATA Combo - Silver

Product Details:

The e combo 3.5 SATA/PATA to eSATA/USB2.0 Hard Drive Enclosure is the best solution for users who want to upgrade their hard disk from PATA( Parallel ATA) to the newest HDD technology -SATA( Serial ATA) interface and still can use the same USB2.0 enclosure. Not only the USB interface also the eSATA interface will be included on the eCombo enclosure while using the SATA HDD then just a slide switch be switched then you will have two benefits. Most popular and convenient USB interface to your hard disk or the best data access performance without any data interface change delay using eSATA. The eCombo external enclosure that converts any 3.5 PATA/SATA hard disk drive into a 480M bits/sec Hi-speed USB2.0 or direct connects the SATA HDD and gets 1.5G bits/sec( SATA I) or 3.0 G bits/sec( SATA II, Phase II) performance.( The computer needs to have eSATA external ports). OKGEAR storage series are new style anodized Aluminum External Hard Drive and optical device Enclosure . OK350A series can let you easily convert your 3.5 ’ ’ Hard Drive into to a Hi-Speed portable drive. This Enclosure is with mirror painting finish, sleek curves and bold colors . Aluminum cases can draw away and really cooling down the heat from your Hard Drive, protecting your Hard Drive from overheating. It plugs into any computer ’s available external SATA port or Hi-Speed USB 2.0 port to give you convenient portable date storage.

Features:

• Ideal solution for any brand 3.5 PATA and SATA HDD up to any capacity.


• Accepts ATA-6 and ATA-5 disk drive.


• Aluminum housing for optimal heating dissipation.


• True plug and play.


• Hot- Swappable.


• Compatible with Window 98/ME/2000/XP


• Compatible with Mac OS 8.6 and newer


• Stackable design works vertically or horizontally


• Beautiful, flexible and fast! Transfer data from any HDD at speeds up to 480MbpsFOR USB 2.0 interface. For SATA transfer rates up to 3.0 G bits/sec( depend on the SATA HDD type).


• Backwards compatible to USB1.1.


• Hard drive activity light for indication.


• Fanless design.


• one USB2.0 port, one eSATA port.


• Converts 3.5 PATA/SATA hard drive into Hi-speed USB2.0 or SATA to eSATA external hard drives.

Specifications:

Bus interface	USB2.0,USB1.1,Serial ATA
Compliance	Gen 1i,and Gen 1m of SATA II electrical spec. 1.0
support	SATA II Asynchronous signal recovery( hot plug) feature
Â	480 Mbps high speed and 12 Mbps full speed USB operation
PC OS	Window XP/2000/ME/98SE
Mac OS	Mac OS 9.1 or newer
Environmental conditions	operation: 32F ~104F Non-operation: -68F ~176F
Power	5V(1.5A),12V(1.8A)
Mounting method	Horizontal or vertical
Weight	3lbs,1.36 kg
Dimension	210.5mm x 38.5mm x 119.5mm Â
EMI/safety	FCC,CE
System requirements
PC	Pentium III 800 MHz( minimum) Pentium 4 1.7 GHz( recommended) 128 MB RAM(minimum) 256 MB RAM(recommended)
Mac	any Mac that supports USB or Firewire
 Computer must have proper port or PCI card
Box content
   one e combo 3.5 PATA/SATA HDD to                        eSATA/USB2.0 external Enclosure
   one 3 feet A-male to B- male USB2.0 cable
   one 3 feet eSATA cable
   User manual
   Mounting screws
   Driver CD (Win 98 only)
   AC power adapter with power cord
   Clear mounting stand