Phobya 10mm (3/8") Fitting G1/4 with O-Ring (High-Flow) - Short - Silver

Robust  high-quality nickel plated barbed fitting with cylindrical
thread (G1/4). The fitting is suitable for PVC, PU, PA, silicone and PE
hoses with an inner diameter of 10mm. With integrated 1/4 Perbunan(r)
O-Ring seal.

We recommend the use of hose clamps or zip ties for best possible safety!

Note for watercooling beginners:

The connectors for hoses(7/16, 3/8,1/2) are provided with
measurements in mm in our shop. These can differ by +-1mm, which is no
problem as hose clamps have to be used for installation. If the hose is
to be mounted without a clamp, a larger fitting should be chosen. With
some fittings that tend to be larger, it is possible though that a hose
with an inner diameter of 13mm actually does seal without a hose clamp.

Overview:

10mm (3/8) hose clamp: up to 8mm none, from 10mm up required

10mm (7/16) hose clamp: up to 8mm none, from 10mm up required

12mm (1/2) hose clamp: up to 11mm none, from 12mm up required

13mm (1/2) hose clamp: up to 11mm none, from 13mm up required