Phobya 10mm (3/8') Fitting G1/4 with O-Ring - Knurling - Short - Silver Nickel Plated

10mm barbed fitting made from nickel coated brass and with O-ring
gasket for PVC, PU, PA., silicone or PE hoses with an inner diameter of
10mm. G1/4 outer thread.

Technical specifications:

Length: 21mm

Width: 18mm

Thread: 1/4

Extent of delivery:

1x 10mm (3/8) barbed fitting G1/4 with O-ring

Note for watercooling beginners:

The connectors for hoses(7/16, 3/8,1/2) are provided with
measurements in mm in our shop. These can differ by +-1mm, which is no
problem as hose clamps have to be used for installation. If the hose is
to be mounted without a clamp, a larger fitting should be chosen. With
some fittings that tend to be larger, it is possible though that a hose
with an inner diameter of 13mm actually does seal without a hose clamp.

Overview:

10mm (3/8) hose clamp: up to 8mm none, from 10mm up required

10mm (7/16) hose clamp: up to 8mm none, from 10mm up required

12mm (1/2) hose clamp: up to 11mm none, from 12mm up required

13mm (1/2) hose clamp: up to 11mm none, from 13mm up required