Scythe "Thermal Elixer 2" - PremiumThermal Grease

The new Scythe Thermal Elixer 2 provides excellent heat transfer between the processor and heat sink without compromising the application. High-quality ingredients in combination with the Pure Aluminum Particle Hybrid technology reduce the thermal resistance significantly and allow a convenient and controlled application. It has an excellent long-term stability and has no electrically conductivity under normal use. The applied thermal grease is ready to be used right away and no burn-in time is required.

*Note: This Item can not be shipped using DHL*

Excellent Cooling Performance
With the focus on the PC sector Pure Aluminum Particle Hybrid Technology is used to optimize the heat transfer between CPU and heat sink. The Thermal Elixer 2 has a very high thermal conductivity and low thermal resistance. A special additive composition provides an excellent long-term stability and extremely low dry-out characteristics.

 

Easy to Apply
The consistency allows easy and economic application. Even removing the applied thermal grease is easily. Furthermore, it has a very low dielectric constant / high dielectric strength and no corrosive properties. There is no risk of short circuit, even if the thermal compound covers electrically conductive components.

No burn-in time
The Thermal Elixer 2 reaches its maximum potential immediately after applying. It does not require large time periods to provide maximum cooling performance.

Model Name:
Scythe Thermal Elixer 2 Wärmeleitpaste

Model Number:
SCTE-2000

Weight:
5 g / content

Thermal Resistance:
0,013 K-in² / W

Thermal Conductivity:
3.5 W/ (mK)

Temperature Range:
-20° ~ 120°C

Dielectric Strength:
1.5 KV / mm

Ingredients:
Aluminum (~ 70%)
Zinc Oxide (~ 20%)