Shin-Etsu G751 Thermal Grease 0.5 Gram

Shin Etsu - the industry standard in high performance thermal interface material. Non-conductive heat transfer CPU thermal grease for maximum performance. This CPU thermal grease's package allows for easy application to most CPU cooler and heat sink. It is used to increase surface contact area for heat transfer by minimizing any air bubbles that exists between the top of the processor and the base of the heat sink. Note that 1 gm is the weight measurement and the syringe packaging shows cc measurement, which does not correspond.

*Note: This Item can not be shipped using DHL*

• Excellent thermal conductivity


• Grease-like products can be screen printed.


• These products show the following characteristics due to their excellent heat and cold resistance:


• High dropping point


• Less oil separation and lower volatile matter


• Good stability against thermal oxidation


• Good stability against consistency changes


• No solidification at temperatures as low as -50°C

Thermal Conductivity	> 7.6W/m-k
Thermal Resistance	< 0.06 oC-in2 /w
Silicone compounds	50%
Carbon compounds	20%
Metal Oxide compounds	30%
N.W	1.5g

Usage and Handling:

• For best results, the substrate surface should be cleaned and dried before application.


• Greases and fluid compounds should be stirred thoroughly with a spatula before use.


• Wear protectors such as gloves when in use.


• If grease adheres to the skin, wipe well with dry cloth, then wash with soap and running water.


• Greases and fluid compounds must be stored in a dark place at room temperature
  (1 to 30°C).