Alphacool HT 13mm Compression Fitting G1/4 for Plexi/Brass tubes - Knurled - Chrome

Alphacool HardTube compression fittings are a true masterpiece promising absolute tightness and high quality.

Suitable for all Alphacool HardTubes and Monsoon hard tube with an outer diameter of 13mm.  Available in Deep Black and Chrome.

Tube Installation:

First put the nut on the pipe, follow it with the plastic disc which protects the O-ring and the thick O ring itself. Now the tube is easily inserted into the port where the second O-ring is seated resting very close to the tube. As a final step, the nut is pushed and screwed onto the fitting.

For easy tightening / removal an 8mm Allen key can be used on the inside of the fitting. Please make sure you do not over tighten the fittings.