High-Flow barb fittings for hoses with an inner diameter of 11-13mm.
Technical data:
Thread: G1/4
Overall length: 29mm
Inner diameter of hose: 11 bis 13mm
Inner diameter of fitting: 10mm
Thread length: 8mm
Note for watercooling beginners: The connectors for imperial
hoses(7/16", 3/8", ½") are provided with measurements in mm in our
shop. These can differ by +-1mm, which is no problem as hose clamps have
to be used for installation. If the hose is to be mounted without a
clamp, a larger fitting should be chosen. With some fittings that tend
to be larger, it is possible though that a hose with an inner diameter
of 13mm actually does seal without a hose clamp. Overview: 10mm (3/8") hose clamp: up to 8mm none, from 10mm up required 10mm (7/16") hose clamp: up to 8mm none, from 10mm up required 12mm (1/2") hose clamp: up to 11mm none, from 12mm up required 13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
High-Flow barb fittings for hoses with an inner diameter of 11-13mm.
Technical data:
Thread: G1/4
Overall length: 29mm
Inner diameter of hose: 11 bis 13mm
Inner diameter of fitting: 10mm
Thread length: 8mm
Note for watercooling beginners: The connectors for imperial
hoses(7/16", 3/8", ½") are provided with measurements in mm in our
shop. These can differ by +-1mm, which is no problem as hose clamps have
to be used for installation. If the hose is to be mounted without a
clamp, a larger fitting should be chosen. With some fittings that tend
to be larger, it is possible though that a hose with an inner diameter
of 13mm actually does seal without a hose clamp. Overview: 10mm (3/8") hose clamp: up to 8mm none, from 10mm up required 10mm (7/16") hose clamp: up to 8mm none, from 10mm up required 12mm (1/2") hose clamp: up to 11mm none, from 12mm up required 13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
https://www.performance-pcs.com/phobya-13mm-1-2-barbed-fitting-g1-4-with-o-ring-high-flow-ph-63021.html9410Phobya 13mm (1/2") Barbed Fitting G1/4 with O-Ring (High-Flow)https://www.performance-pcs.com/media/catalog/product/t/m/tmp63021_01.jpg2.492.4900USDInStock/Water Cooling/Fittings & Connectors<h3 style="font-family: tahoma,arial,helvetica,sans-serif;"><font size="4">Product Details:</font></h3>
<div style="font-size: 14px; font-family: tahoma,arial,helvetica,sans-serif;">
<div><p><font size="2">High-Flow barb fittings for hoses with an inner diameter of 11-13mm.</font></p><font size="2"> </font><font size="2"><strong>Technical data:</strong><br /></font><ul><li><font size="2">Thread: G1/4</font></li><li><font size="2">Overall length: 29mm</font></li><li><font size="2">Inner diameter of hose: 11 bis 13mm</font></li><li><font size="2">Inner diameter of fitting: 10mm </font></li><li><font size="2">Thread length: 8mm</font></li></ul><font size="2"> </font><font size="2"><span style="font-size: 10pt;"><span style="font-weight: bold;">Note for</span><span class="SpellE" style="font-weight: bold;"> watercooling beginners</span><span style="font-weight: bold;">:</span><br />The connectors for <span class="SpellE">imperial</span>
hoses(7/16", 3/8", ½") are provided with measurements in mm in our
shop. These can differ by +-1mm, which is no problem as hose clamps have
to be used for installation. If the hose is to be mounted without a
clamp, a larger fitting should be chosen. With some fittings that tend
to be larger, it is possible though that a hose with an inner diameter
of 13mm actually does seal without a hose clamp.</span></font><font size="2"> </font><font size="2"><br /></font><font size="2"><span style="font-size: 10pt;"><br /></span></font><font size="2"><span style="font-size: 10pt;"><span style="font-weight: bold;">Overview:</span><br /></span></font><font size="2"><span style="font-size: 10pt;">10mm (3/8") hose clamp: up to 8mm none, from 10mm up required<br /></span></font><font size="2"><span style="font-size: 10pt;">10mm (7/16") hose clamp: up to 8mm none, from 10mm up required<br /></span></font><font size="2"><span style="font-size: 10pt;">12mm (1/2") hose clamp: up to 11mm none, from 12mm up required<br />13mm (1/2") hose clamp: up to 11mm none, from 13mm up required</span></font>
</div>
</div> <h3 style="font-family: tahoma,arial,helvetica,sans-serif;"><font size="4">Product Details:</font></h3>
<div style="font-size: 14px; font-family: tahoma,arial,helvetica,sans-serif;">
<div><p><font size="2">High-Flow barb fittings for hoses with an inner diameter of 11-13mm.</font></p><font size="2"> </font><font size="2"><strong>Technical data:</strong><br /></font><ul><li><font size="2">Thread: G1/4</font></li><li><font size="2">Overall length: 29mm</font></li><li><font size="2">Inner diameter of hose: 11 bis 13mm</font></li><li><font size="2">Inner diameter of fitting: 10mm </font></li><li><font size="2">Thread length: 8mm</font></li></ul><font size="2"> </font><font size="2"><span style="font-size: 10pt;"><span style="font-weight: bold;">Note for</span><span class="SpellE" style="font-weight: bold;"> watercooling beginners</span><span style="font-weight: bold;">:</span><br />The connectors for <span class="SpellE">imperial</span>
hoses(7/16", 3/8", ½") are provided with measurements in mm in our
shop. These can differ by +-1mm, which is no problem as hose clamps have
to be used for installation. If the hose is to be mounted without a
clamp, a larger fitting should be chosen. With some fittings that tend
to be larger, it is possible though that a hose with an inner diameter
of 13mm actually does seal without a hose clamp.</span></font><font size="2"> </font><font size="2"><br /></font><font size="2"><span style="font-size: 10pt;"><br /></span></font><font size="2"><span style="font-size: 10pt;"><span style="font-weight: bold;">Overview:</span><br /></span></font><font size="2"><span style="font-size: 10pt;">10mm (3/8") hose clamp: up to 8mm none, from 10mm up required<br /></span></font><font size="2"><span style="font-size: 10pt;">10mm (7/16") hose clamp: up to 8mm none, from 10mm up required<br /></span></font><font size="2"><span style="font-size: 10pt;">12mm (1/2") hose clamp: up to 11mm none, from 12mm up required<br />13mm (1/2") hose clamp: up to 11mm none, from 13mm up required</span></font>
</div>
</div>Phobya001.5000add-to-cartPhobyaBarbStraight4049469020569