Self-sealing quick release connection for compressed air systems or systems with high fluid pressures.
Self-sealing quick release connection for compressed air systems or systems with high fluid pressures. This clutch also works in PC water cooling but it also may cause leakage because the Dichtunktion via the internal spring and the positioning of Oringe with too little pressure does not work properly, that is no reason for complaint. At higher pressures, when air pressure from 2 bar, the coupling function properly. In case of application to a fluid is observed: This coupling makes it possible to separate compounds in the filled system, without suffering a leakage loss. Not entirely leak free (meaning that after separation 1-2 drops).
Specifications:
Fittings for 10/8mm hoses (10mm OD and 8mm inner diameter).
Bulkhead thread: M14
Scope of delivery:
- 1x plug (male)
- 1x socket (female)
- 2x nut
- 1x Counter nut M14
Note frequent user errors: In the disconnected state when "Mommy track" So in the clutch, the safety slide must be pushed back into place and to ensure the tightness.