The Modultra Conductor heatsink is CNC machined from billet 6061 aluminum for thermal conductivity. The heatsink is then Cerakoted for corrosion resistance. The heatsink does not come in contact with loop coolant so there is no chance of loop contamination.
Frequently Bought Together
The Modultra Conductor heatsink is CNC machined from billet 6061 aluminum for thermal conductivity. The heatsink is then Cerakoted for corrosion resistance. The heatsink does not come in contact with loop coolant so there is no chance of loop contamination. All Modultra heatsinks have a total of 112 convection holes drilled on its 4 sides. This is not a cheap feature to add, however it is one of the reasons for its thermal performance. The Conductor heatsink can be used with any Laing DDC or Laing DDC pump clone. During testing we measured a 17-20 degree pump temperature reduction when used with any acrylic or acetal plastic pump housing. When used with the LOBO brass pump housing we saw a 45 degree C reduction in pump temperatures.
The Conductor heatsink is available in 4 versions. One plain version and 3 with CNC engraving applied to their tops. Other than the engraving the heatsinks are identical.
All Modultra heatsinks come with 4x M4x30mm mounting screws, 1X thermal heat transfer pad and 2x pieces of Kapton tape for insulation purposes. Please see user manual for installation.