Facebook Pixel

 

PPC's DUAL Über D5 Fully Modded D5 Water Pump (Single Loop) - Matte Black

PPC's DUAL Über D5 Fully Modded D5 Water Pump (Single Loop) - Matte Black

Laing DDC-Pumpe 12V DDC-1T incl. Phobya Laing DDC Light Plexi Top

Laing DDC-Pumpe 12V DDC-1T incl. Phobya Laing DDC Light Plexi Top

Laing DDC-Pumpe 12V Pro Acetal

SKU
AC-49090-D

Estimated Delivery

Loading...
at ZIP
Order within

This is a bundle consisting of the popular DDC-1T Laing pump and our proven Laing top. This kit is cheaper than the individual purchases!

 

$89.95
In stock Low Stock 5 left
More Information on Shipping

This is a bundle consisting of the popular DDC-1T Laing pump and our proven Laing top. This kit is cheaper than the individual purchases!

 

Technical Specifications:

Laing DDC-1T/12V pump

Dimensions: (WxLxH) 62x62x38mm (without connections)
Motor type: Electronically commutated spherical motor
Rated voltage: 12 V DC voltage
Perm. Voltage range 6 to 13.2 volts
Head at 12V: 3,7 m
max. Flow rate: 420L / h
Fluids: water, water / *
Max System Temperature: 60 ° C
Wetted parts: stainless steel 1.4571, PPS-GF40, EPDM O-rings,
Aluminum oxide, hard coal
Connections: 2x 10/8mm hose connection (no grommet required)

Pumps speedometer: With 3-pin Molex connector as pump pulse output (for mainboard or control units)

Note: The pump is the latest revision.

IMPORTANT:

  • We recommend the use of biocide addition of water (such as AT Protect Plus or Innovatek Protect). Anti-Corro-Fluid is not recommended.
  • Due to the power of the pump may min with only one cycle. 1 cooler will be operated. When operating without load can blow the pump.
  • The Laing pump's electronics are not waterproof. Please make sure that the electronic components Do Come not in contact with water during installation or when working on the pump. When replacing the top always Ensure a proper fit of the O-ring seal and avoid spills when filling the reservoir Laing. Damages due to water in the electronic components are not replaced by Laing!

Alphacool top for Laing DDC pumps

Dimensions (LxWxH): 80x80x25mm (Without fittings, without pump)
Weight: 180g
Material: Acetal
Mounting; 4x M4 threads, 8x Decoupling
Connection threads: 3x G1/4" threads

Extent of delivery:

1x Laing DDC-1T/12V pump (Item number: 49064)
1x Alphacool top for Laing DDC pumps (Item number: 52165)

Please note:
The items are shipped in an unassembled state

Write Your Own Review
You're reviewing:Laing DDC-Pumpe 12V Pro Acetal
Your Rating

Questions & Answers

Search Q/A
Sort by
Expand All +
Download PDF Download PDF
We found other products you might like!
Recently Viewed
No recently views items
Clear All
Please select a wishlist