Uncompromising in the choice of material As usual, Alphacool also uses pure copper for the NexXxoS Monsta 200 mm radiator. The antechambers, the water channels and the cooling fins are made of copper and are unique worldwide. As a result, Alphacool radiators have been among the most popular and best on the market for many years, which is the perfect basis for any water cooling.
Uncompromising in the choice of material As usual, Alphacool also uses pure copper for the NexXxoS Monsta 200 mm radiator. The antechambers, the water channels and the cooling fins are made of copper and are unique worldwide. As a result, Alphacool radiators have been among the most popular and best on the market for many years, which is the perfect basis for any water cooling.
Full cooling performance In order to maximize the performance of a radiator, Alphacool digs deep into its bag of tricks. It starts with copper. With a thermal conductivity of 400 W / (mK) for copper compared to 236 W / (mK) for aluminum, the winner is certain. In addition, there is the special fin density. Alphacool is one of the oldest water cooling companies and has carried out countless laboratory tests. The result, especially for such large radiators, is a fin spacing of 12 FPI. As a result, the air flow is hindered relatively slightly, since the air can slide through even with very little pressure. This makes the radiator ideal for fans with low speed. The cooling performance does not suffer from this, on the contrary. In order to use the airflow optimally, all cooling fins have small flaps. These are tiny wings which direct the airflow in the desired direction. In the case of the radiators, these are barely 1 mm high, but still ensure controlled air turbulence in order to increase cooling performance and minimize flow noise.
Which fans? The Monsta 200 mm radiator offers space on the mounting frame for a 200 mm fan with 154 or 165 mm mounting holes. The fans are screwed onto a mounting frame, which can also be removed for purely passive operation so as not to obstruct the natural flow of air.
Connection options The Alphacool NexXxoS Monsta 200 mm radiator offers six G1 / 4 “threads for IN and OUT. Another G1 / 4 “thread on the back of the radiator serves as a fillport. Alternatively, a temperature sensor or a drain cock can also be attached here.
Small was yesterday. With a cooling surface of 20 x 20 cm, the 200 mm radiator offers more than enough cooling power to cool any CPU and any graphics card.
Technical specifications L x W x H: 24.8 x 19.9 x 8.7 cm Weight: 1700g Material cooling fins: Copper Material cooling channels: Copper Material pre-chambers: Copper Material outer housing: Steel Fins per inch: 12 Connections: 7 x G1 / 4 " Fan mounting thread size: M3 Fan sizes: 180 and 200mm Mounting holes Fan: 2x 185 x 185 mm, 165 x 165 mm, 155 x 155 mm Pressure tested up to: 1.5 bar
https://www.performance-pcs.com/alphacool-nexxxos-monsta-full-copper-200mm-radiator.html33952Alphacool NexXxoS Monsta Full Copper 200mm radiatorhttps://www.performance-pcs.com/media/catalog/product/a/c/ac-14393_01.jpg113.95113.9500USDInStock/Water Cooling/Radiators<p><strong>Can it be a little bigger?<br /><br />Uncompromising in the</strong><br />choice <strong>of material</strong> As usual, Alphacool also uses pure copper for the NexXxoS Monsta 200 mm radiator. The antechambers, the water channels and the cooling fins are made of copper and are unique worldwide. As a result, Alphacool radiators have been among the most popular and best on the market for many years, which is the perfect basis for any water cooling.</p> <p><strong>Can it be a little bigger?<br /><br />Uncompromising in the</strong><br />choice <strong>of material</strong> As usual, Alphacool also uses pure copper for the NexXxoS Monsta 200 mm radiator. The antechambers, the water channels and the cooling fins are made of copper and are unique worldwide. As a result, Alphacool radiators have been among the most popular and best on the market for many years, which is the perfect basis for any water cooling.<br /><br /><strong>Full cooling performance</strong><br />In order to maximize the performance of a radiator, Alphacool digs deep into its bag of tricks. It starts with copper. With a thermal conductivity of 400 W / (mK) for copper compared to 236 W / (mK) for aluminum, the winner is certain. In addition, there is the special fin density. Alphacool is one of the oldest water cooling companies and has carried out countless laboratory tests. The result, especially for such large radiators, is a fin spacing of 12 FPI. As a result, the air flow is hindered relatively slightly, since the air can slide through even with very little pressure. This makes the radiator ideal for fans with low speed. The cooling performance does not suffer from this, on the contrary. In order to use the airflow optimally, all cooling fins have small flaps. These are tiny wings which direct the airflow in the desired direction. In the case of the radiators, these are barely 1 mm high, but still ensure controlled air turbulence in order to increase cooling performance and minimize flow noise.</p>Alphacool00https://www.performance-pcs.com/media/catalog/product/a/c/ac-14393_02.jpghttps://www.performance-pcs.com/media/catalog/product/a/c/ac-14393_03.jpghttps://www.performance-pcs.com/media/catalog/product/a/c/ac-14393_04.jpghttps://www.performance-pcs.com/media/catalog/product/a/c/ac-14393_05.jpghttps://www.performance-pcs.com/media/catalog/product/a/c/ac-14393_06.jpghttps://www.performance-pcs.com/media/catalog/product/a/c/ac-14393_07.jpg76.9200add-to-cartAlphacoolBlack200mm68mm4250197143936<p><strong>Which fans?</strong><br />The Monsta 200 mm radiator offers space on the mounting frame for a 200 mm fan with 154 or 165 mm mounting holes. The fans are screwed onto a mounting frame, which can also be removed for purely passive operation so as not to obstruct the natural flow of air.<br /><br /><strong>Connection</strong><br />options The Alphacool NexXxoS Monsta 200 mm radiator offers six G1 / 4 “threads for IN and OUT. Another G1 / 4 “thread on the back of the radiator serves as a fillport. Alternatively, a temperature sensor or a drain cock can also be attached here.<br /><br />Small was yesterday. With a cooling surface of 20 x 20 cm, the 200 mm radiator offers more than enough cooling power to cool any CPU and any graphics card.</p><p><strong>Technical specifications<br /></strong>L x W x H: 24.8 x 19.9 x 8.7 cm<strong><br /></strong>Weight: 1700g<br />Material cooling fins: Copper<br />Material cooling channels: Copper<br />Material pre-chambers: Copper<br />Material outer housing: Steel<br />Fins per inch: 12<br />Connections: 7 x G1 / 4 " Fan mounting<br />thread size: M3<br />Fan sizes: 180 and 200mm Mounting holes Fan:<br />2x 185 x 185 mm, 165 x 165 mm, 155 x 155 mm<br />Pressure tested up to: 1.5 bar</p>
Low Stock 4 left
Download PDF 
