Aquacomputer Airplex Modularity System 840mm, Aluminum Fins, Compact 600/12V, Stainless Steel Panels
Koolance Radiator, 4x120mm 11-FPI Copper [no nozzles]
The copper core HX-480HL provides an approximate 1300W of added heat dissipation when coupled with four 120mm fans. With a fin density of 11 FPI (fins per inch), it is optimized for low/quiet air flow. Horizontal G 1/4 BSP threaded nozzle sockets. BLT-HX025 mounting screw kits included. Dual pass, 15mm (0.59") fan hole spacing, copper fins with brass pipes.
Koolance is among connoisseurs a guarantee of excellent quality and appearance and provides a wide range of articles in the field of water cooling, ranging from heat sinks and radiators on fittings to pumps and hoses. This means that the manufacturer knows exactly what it offers its discerning customers.
With the HX- 480HL provides a cooling Koolance strong quad radiator with a low fin density of 11 FPI ( fins per inch , dt : fins per inch) at . Together with his "Dual Pass Coolant " design and a relatively small thickness of approximately 57 mm of the HX- 480HL provides a very good performance , even if more slowly rotating Silent fans are used . In this case, Koolance has provided the one-sided configuration with four 120 mm fans.
Black low-profile heat exchanger having a core of copper and brass tubes . For integration into the cooling circuit are available two sides outgoing G1/4-Zoll-Gewinde . In addition to the height of 5.72 cm, the 480s radiator 13.97 cm wide and 59.69 cm long. Supplied with mounting screws for four fan with 25 mm frame width are included .
Additional screws from Koolance for fixing 120mm standard fans can be found under item no WARA - 232 in Caseking range.
Note: Koolance strongly recommends that you only use brand 's own cooling fluids or supplements to counter unwanted metal mixtures or biological contamination . In addition, aluminum and may naked , unvernickeltes copper or brass and silver and nickel not be used in the same watercooling system !
Dimensions: 139.7 x 57.2 x 596.9 mm (W x H x D)
Weight: 1,590 g
Material: Copper ( Core ) , brass ( tubes)
Compatible Fan: on one side 4x 120 mm
Fin density : 11 FPI
Thread: 2x G1 / 4 inches
Scope of delivery: 16x 30 mm fan screws for four 25 mm thick fan