Alphacool ES Reservoir 4U - Single for Rendermaster (Bulk)
The Enterprise Solution reservoir for 4U enclosures offers many connection options and a high filling volume for water cooling systems that enables them to run as long as possible without maintenance.
No StockFrequently Bought Together
The Enterprise Solution reservoir for 4U enclosures offers many connection options and a high filling volume for water cooling systems that enables them to run as long as possible without maintenance.
Installation
On the bottom side there are mounting possibilities for four M3 screws to mount the reservoir at any position in the case. The screw holes are spaced 60 and 30 mm apart. The connection possibilities are more than extensive, with five G1/4" thread entries at the front and rear.
Structure
The reservoir can hold up to 300ml of liquid. The case consists of PMMA and is therefore extremely robust. The front and back are made of 9 mm thick, transparent acrylic. Two LED strips, each with 6 blue shining LEDs, facilitate reading the filling level. Three of the G1/4" threads are based on Alphacool’s patented
system, which allows the plugs to be flush with the housing.
Technical data:
L x W x H: 10.5 x 7.5 x 8.2cm
Filling Quantity: 300ml
Connections: 5x G1/4
Weight: 500g
Lighting: 2 x LED strips
Connection LEDs: 3-Pin
Colour of the lighting: Blue
Material: PMMA
| Color: | black |
| Manufacturer: | Alphacool |
| Preinstalled pump: | No |
| Connector: | G1/4" inner thread |
| Fillport: | G1/4" inner thread |
| LED hole: | Not available |
| Material: | POM |
| Model of reservoir: | Other reservoirs |
| Pump compatibility: | For DC-LT |
Â
Questions & Answers
Download PDF 
SAME DAY SHIPPING
Most orders ship same day or use our Rush Service.
100% SATISFACTION
Our promise you will always be happy with your purchase.
ONLINE SUPPORT 24/7
Use Email, chat or phone for any tech or order help.
