Facebook Pixel

 

Bitspower Mono Block for MSI MEG X570 GODLIKE

Bitspower Mono Block for MSI MEG X570 GODLIKE

EK-Quantum Momentum² ROG Strix X570-I Gaming D-RGB - Plexi

EK-Quantum Momentum² ROG Strix X570-I Gaming D-RGB - Plexi

EK-Quantum Momentum² ROG Strix X570-I Gaming D-RGB - Plexi

SKU
EK-MOM2-ROG-STRIX-X570I-DRGB-NP

EK-Quantum Momentum² ROG Strix X570-I GAMING D-RGB is a Quantum Line monoblock specially designed for the ROG Strix X570-I GAMING motherboard, featuring the newest Velocity² cooling engine with low restriction and high performance. This is a complete all-in-one (CPU and motherboard) liquid cooling solution for Ryzen AMD processors. This Momentum² is EK-Matrix7 compliant.

$209.99
In stock Low Stock 1 left
More Information on Shipping

Frequently Bought Together

  1. EK-Quantum Momentum² ROG Strix X570-I Gaming D-RGB - Plexi
  2. +
  3. EK-RGB Extension Cable (510mm)
  4. +
  5. EK-CryoFuel Clear Premix 1000 mL
  6. +
  7. EK-Leak Tester
  8. +
  9. EK-CryoFuel Mystic Fog (Premix 1000mL)
Total price: $0.00
  • This item: EK-Quantum Momentum² ROG Strix X570-I Gaming D-RGB - Plexi $209.99
  • EK-Leak Tester $41.99 Out of stock

EK-Quantum Momentum² ROG Strix X570-I GAMING D-RGB is a Quantum Line monoblock specially designed for the ROG Strix X570-I GAMING motherboard, featuring the newest Velocity² cooling engine with low restriction and high performance. This is a complete all-in-one (CPU and motherboard) liquid cooling solution for Ryzen AMD processors. This Momentum² is EK-Matrix7 compliant.

This monoblock uses the latest generation of EK-Quantum Velocity² cooling engine to ensure the best possible CPU cooling while not reducing flow to other components. This water block directly cools the AM4 Ryzen CPU, VRM section, and importantly the X570 Chipset which tends to run quite hot. This eliminates the need for any fans on the motherboard that could create additional noise pollution.

Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks. Like with every EK monoblock, the EK-Quantum Momentum² ROG Strix X570-I Gaming D-RGB features a high flow design and it can be easily used with the system using weaker water pumps or lower pump speed settings as well. The Quantum Momentum² monoblock also comes with sophisticated D-RGB (addressable) lightning with a total of 19 LEDs. They connect to a standard 3-pin 5V D-RGB addressable header, named Aura Gen2 header on this ROG motherboard.

The base of the monoblock is made of nickel-plated electrolytic copper while the top is made of quality cast acrylic material. The nickel-plated brass screw-in standoffs are pre-installed and allow for easy installation.

Unlike other solution on the market, this is a true one-piece, sturdy and reliable liquid cooling product which requires only two connector fittings for proper operation. The enclosed thermal pad is used on the voltage regulator module and X570 chipset to improve stability, performance and prolong the lifespan of the motherboard. For the CPU, please use the enclosed (electrically non-conductive) thermal grease EK-TIM Ectotherm.

This product is compatible with ASUS Aura Sync RGB control software. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the AURA addressable Gen2 LED header.

 

Technical specifications:
- Dimensions: (LxHxW) - 137,5x148x40,5mm
- D-RGB cable length: 500mm
- D-RGB LED count: 19
- D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground)

Enclosed:
- EK-Quantum Momentum² ROG Strix X570-I GAMING D-RGB Monoblock
- Mounting mechanism
- Thermal grease EK-TIM Ectotherm
- Thermal pads
- Backplate

Made in Slovenia - Europe!

PLEASE NOTE:

  • The use of specifically engineered coolants that contain corrosion, scale, and biological inhibitors is mandatory to prevent damage to your nickel plated water block! EK is offering a selection of such products in the coolants section.
  • This product should NOT be installed with any aluminum EK Fluid Gaming parts!
  • Fittings are not included! Two fittings are required for proper operation. Due to the immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our website.
  • Using delidded CPUs with monoblocks is not recommended as it can lead to poor cooling contact and performance.
  • The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB(A-RGB) header.

Additional Info

Material / Design / Color option Nickel Plexi
Threads G1/4
Sockets AM4
Chip Manufacturer AMD Radeon
 
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Questions & Answers

Search Q/A
Sort by
Expand All +
pdf
Installation Manual (3.24 MB) Download
Download PDF Download PDF
We found other products you might like!
Recently Viewed
No recently views items
Clear All
Please select a wishlist