Facebook Pixel

 

Bitspower Classic VGA Water Block for ASUS TUF Gaming GeForce RTX 3090

Bitspower Classic VGA Water Block for ASUS TUF Gaming GeForce RTX 3090

EK-Classic GPU Water Block RTX 3080/3090 D-RGB

EK-Classic GPU Water Block RTX 3080/3090 D-RGB

EK-Classic GPU Water Block RTX 3080/3090 D-RGB

SKU
EK-CL-GPU-RTX-3080-90-D-RGB-NP

Estimated Delivery

Loading...
at ZIP
Order within

EK-Classic GPU Water Block RTX 3080/3090 D-RGB is a high-performance full-cover water block for Reference design NVIDIA® GeForce RTX 3080 and RTX 3090 graphics cards, that are based on NVIDIA Ampere™ architecture. This water block comes with a pre-installed 3-pin 5V D-RGB LED strip. For a precise compatibility match of this water block, we recommend you refer to the EK Cooling Configurator.

$139.99
In stock Low Stock 2 left
More Information on Shipping

Frequently Bought Together

  1. EK-Classic GPU Water Block RTX 3080/3090 D-RGB
  2. +
  3. EK-Vector RTX Backplate - Nickel
  4. +
  5. EK-CryoFuel Clear Premix 1000 mL
  6. +
  7. EK-Leak Tester
  8. +
  9. EK-Loop Connect
Total price: $0.00
  • This item: EK-Classic GPU Water Block RTX 3080/3090 D-RGB $139.99
  • Maximum image width: 12000 px.

    Maximum image height: 12000 px.

  • EK-Leak Tester $39.99 Out of stock

EK-Classic GPU Water Block RTX 3080/3090 D-RGB is a high-performance full-cover water block for Reference design NVIDIA® GeForce RTX 3080 and RTX 3090 graphics cards, that are based on NVIDIA Ampere™ architecture. This water block comes with a pre-installed 3-pin 5V D-RGB LED strip. For a precise compatibility match of this water block, we recommend you refer to the EK Cooling Configurator.

This water block is purpose-designed with a much thicker 11.2 mm copper base to clear the tall capacitors on most reference design graphics cards. This gives the water block advantage on the market of having a clean design and a wider compatibility list, without sacrificing any coolant flow restriction. The block features additional cutouts on the base to accommodate non-standard fan-headers and additional PCB components that certain reference designs have.

The EK-Classic water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as cooling liquid is channeled right over these critical areas. The water block is in contact with MOSFETs and chokes to maximize cooling and minimize the chances of coil whine, unlike some products that are currently available on the market.

EK-Classic GPU Water Block 3080/3090 D-RGB

EK-Classic GPU Water Block RTX 3080/3090 D-RGB is compatible with most reference design (not Founders Edition) GeForce RTX 3080 and 3090 graphics cards. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. Additionally, this new design allows the terminal to be screwed directly onto the copper cold plate of the GPU block, making it more rigid and reducing the chances of damaging the water block. 

The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for a safe, painless installation procedure.

 

This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB (A-RGB) header.

EKWB recommends the purchase of an aesthetic retention backplate which improves the looks of your graphics cards. The EK-Classic GPU Water Block RTX 3080/3090 D-RGB is compatible with EK-Classic GPU Backplate RTX 3080/3090 – Black (see below).

G1/4" threaded fittings can be used on both sides of the FC terminal and for multiple GPU connectivity, please refer to our offer of GPU Terminals (see below).

Technical specifications:

- D-RGB cable length: 30cm
- D-RGB connector classic 3-pin (+5V, Data, Empty, Ground)

Enclosed:
- EK-Classic GPU Water Block RTX 3080/3090 D-RGB

Developed in the EU

PLEASE NOTE:

  • This block is made for reference PCB 3080 and 3090 cards. Founders Edition does NOT have a reference PCB.
  • Due to the immense variety of fittings/barbs available on the market, we guarantee compatibility only with EK fittings.
  • Factory backplates are not compatible with this water block!
  • Check your toolbox if you are missing this special Hex adapter for some of the screws.
  • This product should NOT be installed with any aluminum Fluid Gaming parts!
  • The use of specifically engineered coolants that contain corrosion, scale, and biological inhibitors is mandatory to prevent damage to your nickel-plated water block! EK is offering a selection of such products in the coolants section.

Additional Info

Material / Design / Color option Nickel Plexi
Threads G1/4
Chip Manufacturer Nvidia GeForce
Write Your Own Review
You're reviewing:EK-Classic GPU Water Block RTX 3080/3090 D-RGB
Your Rating

Questions & Answers

Search Q/A
Sort by
Expand All +
pdf
Installation Manual (1.69 MB) Download
Download PDF Download PDF
We found other products you might like!
Recently Viewed
No recently views items
Clear All
Please select a wishlist